STM32G431RBT6
Product Specifications
STM32G431RBT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G431RBT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-64 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G431RBT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G431RBT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-64 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G431RBT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-64 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G431RBT6 supported by STM32CubeIDE?
Yes, the STM32G431RBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G431RBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G431RBT6: 64 pins and the full analog set
The R in this string is the 64 pin LQFP body, 10 mm by 10 mm, and the B is the 128 Kbyte flash density that every G431 member carries. Compared with the 48 pin part of the same family, the larger body brings out 26 more general purpose lines, more converter channels, and the pins that let the two converters and the four comparators run without sharing a pad with a serial port.
The core is the Cortex-M4F at 170 MHz with 213 DMIPS, the CORDIC and FMAC accelerators, 22 Kbytes of SRAM with 10 Kbytes of CCM on a private bus, and fourteen timers with two advanced motor control blocks. Figures are from DS12589 Rev 6.
What the 64 pin body adds
| Package | LQFP64, 10 mm by 10 mm, 0.5 mm pitch |
| I/O | Up to 52 fast lines on this body, 86 across the family |
| ADC | Two 12-bit converters, 23 channels, 0.25 microsecond |
| DAC | Four channels, two buffered external at 1 MSPS |
| Analog support | Four comparators, three op amps with PGA, VREFBUF at three levels |
| Core | Cortex-M4F at 170 MHz, 213 DMIPS, DSP instructions |
| Memory | 128 Kbytes flash with ECC, 22 Kbytes SRAM, 10 Kbytes CCM |
| Timers | Two advanced 16-bit with dead time and emergency stop, one 32-bit, two 16-bit |
| Fieldbus | One FDCAN, USART, LPUART, SPI, I2C, USB device |
| Supply | 1.71 V to 3.6 V, separate analog rail |
| Endurance | 10 kcycles at the rated temperature range |
| Temperature | Minus 40 to plus 85 degrees C, 105 degree junction |
The extra pins are mostly analog and timing
On the 48 pin body several converter inputs share a pad with a USART or a timer channel, and a product that needs three serial ports and twelve analog inputs at once runs out of pins before it runs out of peripherals. The 64 pin body separates them. A drive with an encoder interface, a fieldbus port, a service port, three phase current, a bus voltage and four temperature channels fits here without a multiplexer, which is the difference between one board and two.
The second advanced timer is the other half. One timer drives the inverter, the second drives a fan or a second axis, and the 32-bit general purpose timer provides a time base that does not roll over inside a shift. Our ADC and DAC cross reference page covers the parts we compare when the channel count goes beyond what this family offers.
Board notes at 10 mm square
A 10 mm body on a 0.5 mm pitch is friendly to a standard stencil and to optical inspection, and it spreads heat better than the 7 mm part, which matters when the device runs at 170 MHz with two converters active. The decoupling rule is one 100 nF per supply pin close to the body plus a bulk capacitor at the regulator, and the analog rail should be fed through its own filter if the converter readings are used for control rather than for indication.
Programming needs the serial wire pins brought to a header, and a product that is updated in the field needs a way to enter the bootloader without opening the case. That is a firmware decision with a board consequence, and it belongs in the first article review. Our NPI production launch checklist puts the programming port, the boot mode strap and the update test on that list.
Purchase questions
Is RBT6 pin compatible with the 48 pin part? No, the body is larger and the lines are not a superset in every position, so a board change is needed. Does the 128 Kbyte array have two banks? No, this family is a single bank part at every density, and the update route runs from RAM or with the process stopped.
Is the 125 degree grade available in this body? It is, under the string that ends in 3, and the junction limit rises to 130 degrees C. Our MCU cross reference page sets out those grade and density steps in one place so a purchase decision does not depend on decoding a string by hand.