Contact Us

STM32G071CBT6

Brand: ST
STM32G071CBT6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32G071CBT6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32G071CBT6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics

The STM32G071CBT6 is an STMicroelectronics ARM Cortex-M0+ MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32G071CBT6Full Part NumberSTMicroelectronics ARM Cortex-M0+ Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
G0SeriesARM Cortex-M0+ based MCU — G0 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32G071CBT6
CoreARM Cortex-M0+
PackageLQFP-48
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32G071CBT6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M0+ Core — Efficient Processing for Embedded Control

The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32G071CBT6 supported by STM32CubeIDE?

Yes, the STM32G071CBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32G071CBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32G071CBT6: 128 Kbytes of flash with a securable area in a 48 pin LQFP

The string carries seven fields and the last two decide what arrives on the reel. STM32 is the 32 bit Arm family, G is the mainstream line, 071 is the subfamily that carries the USB Type-C Power Delivery controller, C is 48 pins, B is 128 Kbytes of flash, T is the low profile quad flat package at 7 mm by 7 mm, and 6 is the industrial range of minus 40 to plus 85 degrees C. The same silicon is sold as the G8 density with 64 Kbytes and in 28, 32, 48, 52, 64 and 80 pin bodies, so an enquiry that quotes only the family name is not yet an order code.

Inside, the Cortex-M0+ core runs to 64 MHz from a supply of 1.7 to 3.6 V. The flash carries read protection, write protection and a securable area, and the 36 Kbytes of SRAM include 32 Kbytes with a hardware parity check. Fourteen timers sit on the die, two of them rated to 128 MHz, which is twice the core clock and is what makes a 20 kHz motor loop and a 64 MHz control loop fit on one part. The analog side is a 12 bit converter that completes a conversion in 0.4 microseconds, takes up to sixteen external channels, oversamples in hardware to 16 bits and converts across 0 to 3.6 V, plus two 12 bit DACs and two rail to rail comparators.

The order code, character by character

Product familySTM32, 32 bit Arm microcontroller
Product lineG0, mainstream Cortex-M0+
Subfamily071, USB Type-C Power Delivery and HDMI CEC on chip
Pin countC, 48 pins
Flash densityB, 128 Kbytes
PackageT, LQFP 7 mm by 7 mm
Temperature6, minus 40 to plus 85 degrees C ambient
Core clock64 MHz Cortex-M0+, 1.7 to 3.6 V supply
SRAM36 Kbytes, 32 Kbytes with hardware parity
Analog12 bit ADC, 0.4 us per conversion, up to 16 external channels
Timers14, two of them rated to 128 MHz
Serial4 USART, 1 low power UART, 2 SPI at 32 Mbit/s, 2 I2C at 1 Mbit/s
USBType-C Power Delivery controller, no transceiver supply pin required for the policy engine
Identification96 bit unique ID, serial wire debug

Where 128 Kbytes of flash and 36 Kbytes of SRAM end up

At a 512 byte page the 128 Kbyte array is 256 pages, and the first pages hold the bootloader that the part starts from when the boot pin selects the system memory. A USB Power Delivery stack is not small: a policy engine with the vendor and cable discovery tables typically claims 40 to 60 Kbytes of that array before application code, which leaves about half the flash for the product. The securable area is the field worth checking on a quote, because it stays protected when the rest of the array is erased, and that is where a calibration block or a licence key belongs.

The 36 Kbytes of SRAM is where the quote usually goes wrong. A 7 channel DMA controller with flexible mapping moves ADC results, USART frames and SPI traffic without the core, but each stream needs a buffer that is sized by the sample rate rather than by the code. A 16 bit oversampled ADC channel at 20 kHz produces 40 Kbytes per second, so a 200 ms capture is already 8 Kbytes. Add the Power Delivery stack, which needs its own message buffer, and 36 Kbytes stops looking generous. The parity check covers 32 of the 36 Kbytes, so a product that leans on parity for a safety claim has to keep the protected data inside that window.

Questions that arrive with a shortage quote

Is the 6 suffix enough for a sealed enclosure? The 6 part is rated to 85 degrees C ambient and the family also ships in 105 and 125 degree grades. A case that reaches 90 degrees after an hour needs the wider grade, and the grade sits in the last character of the order code rather than in the package, so the reel cannot be substituted at goods inwards without a written deviation.

Does the Power Delivery controller need an external PHY? No. The policy engine, the BMC transceiver and the CC pins are on the die, and the part is specified from 1.7 V, so a 3.3 V rail feeds it directly. What is external is the VBUS path: the FETs, the sense resistor and the protection, and those are chosen by the port power the product claims.

Can the 64 Kbyte G8 part drop into the same socket? The pinout of the 48 pin body is shared across the density options, so the board is the same. The firmware is not: a 64 Kbyte array means the linker script, the bootloader size and the calibration area all change, and the SRAM stays at 36 Kbytes, so a product already tight on RAM gains nothing from the smaller flash.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code with the temperature suffix, and the tape or tray packing the line accepts. Send the whole string and we check it against the current revision on our MCU cross reference page, then confirm date codes, packing and country of origin on the quotation. Reels, trays and cut tape are all available through our kitting service, and the incoming inspection plan explains the checks a reel passes before it enters a production lot.