STM32F215RGT6
Product Specifications
STM32F215RGT6
ST — MCU & Embedded Processors
Product Overview
The STM32F215RGT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F215RGT6: 1024 Kbyte, LQFP64 body
STM32F215RGT6 is a member of the STM32F215 and STM32F217 performance line with cryptographic acceleration described by DocID17050 Rev 13. The order code fixes 1024 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP64 body at 10 x 10 mm with 64 pins, 51 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.
Order code and memory
| Order code | STM32F215RGT6 |
| Program Flash | 1024 Kbytes |
| SRAM | 128 Kbytes |
| Package | LQFP64, 10 x 10 mm, 64 pins |
| Maximum general purpose I/O | 51 |
| Analog input channels | 16 external channels per converter |
| Digital to analog converter | not present |
| External memory controller | not available on this 64 pin body, the controller needs pins the package does not bond |
| Supply voltage | 1.8 to 3.6 V |
| Maximum CPU clock | 120 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DocID17050 Rev 13 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide |
| Clock sources | 4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks |
| Timers | two advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts |
| Serial interfaces | three SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface |
| DMA | two DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support |
| ADC | three 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode |
| DAC | two 12 bit channels with output buffers |
| Ethernet | not present, Ethernet is an STM32F217 feature |
| Camera interface | not present on the STM32F215 |
| Cryptographic acceleration | AES 128, 192 and 256 bit, Triple DES and a HASH unit for MD5 and SHA-1, plus an analog true random number generator |
| Programmable voltage detector | programmable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset |
| Debug port | serial wire debug and JTAG, with the trace port sharing low order port bits |
| Backup domain | the VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C |
| Thermal resistance junction to ambient | 45 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies |
| USB | one OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
The G field is 1 Mbyte, which is the largest firmware space available in a 64 pin STM32F2 package. Certificate stores, a TLS library and a dual image update path are what fill it, and the pin count is unchanged from the 512 Kbyte code, so the choice between the two is purely memory and price.
The cryptographic block is only useful if the keys are handled properly. AES with a 256 bit key in hardware is fast, but a key stored in plain Flash is a key that can be read out with a debugger. The device provides the algorithm and the true random number generator; protecting the key means using the readout protection, keeping it in a region the firmware erases on tamper, or holding it in an external secure element.
Fifty one pins is enough for two CAN channels, two USARTs, the full speed USB port, the converter channels and the debug port, and not much else. The peripheral set on this line is large, and the gap between what the silicon offers and what the package can carry is wider here than anywhere else in the range, so the pin table decides the feature list of the product.
The SRAM is 112 plus 16 Kbytes with 4 Kbytes of backup SRAM in the VBAT domain. For an encrypted node the backup domain is useful: a monotonic counter or a session ticket kept there survives a main rail loss without a Flash write, which removes the wear concern from the values written most often.
At 45 C/W on the LQFP64 the thermal budget is about 440 mW at 85 C ambient. The 1 Mbyte of Flash at 120 MHz with the ART accelerator draws the same core current as the smaller density, so the thermal picture is unchanged between the two codes; the difference shows up in the code that fits, not in the heat.
Where this order code fits
It is 1 Mbyte of Flash with the cryptographic block in a 64 pin package, for secure equipment whose firmware carries a protocol stack, a certificate store and an update image in internal memory. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
What does this part add over STM32F215RET6? Flash only, 1 Mbyte against 512 Kbytes. The package, pinout, SRAM, cryptographic block and temperature grades are identical, so the two are interchangeable on a board when the firmware fits.
Can the cryptographic block handle a TLS session? The AES and HASH blocks accelerate the bulk cryptography, which is the expensive part of a TLS session on a Cortex-M3. The session state machine and the certificate parsing still run in software, and that is where most of the code space on this density goes.
Is the 105 C ambient version available in this package? Yes, as the suffix 7 order code. The T6 parts are rated minus 40 to plus 85 C ambient with a 125 C junction limit.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.