Contact Us

STM32F207ZGT6

Brand: ST
ST STM32F207ZGT6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F207ZGT6 — MCU & Embedded Processors | Superb Automation

STM32F207ZGT6

ST — MCU & Embedded Processors

Product Overview

The STM32F207ZGT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F207ZGT6: 1024 Kbyte, LQFP144 body

STM32F207ZGT6 is a member of the STM32F205 and STM32F207 performance line described by DS6329 Rev 18. The order code fixes 1024 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP144 body at 20 x 20 mm with 144 pins, 114 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.

Order code and memory

Order codeSTM32F207ZGT6
Program Flash1024 Kbytes
SRAM128 Kbytes
PackageLQFP144, 20 x 20 mm, 144 pins
Maximum general purpose I/O114
Analog input channels16 external channels per converter
Digital to analog converternot present
External memory controllerfull flexible static memory controller with four chip selects
Supply voltage1.8 to 3.6 V
Maximum CPU clock120 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDS6329 Rev 18

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide
Clock sources4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks
Timerstwo advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts
Serial interfacesthree SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface
DMAtwo DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support
ADCthree 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode
DACtwo 12 bit channels with output buffers
Ethernet10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping
Camera interfaceparallel camera interface, 8 to 14 bit, with its own DMA
Cryptographic accelerationnot present on this part
Programmable voltage detectorprogrammable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset
Debug portserial wire debug and JTAG, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off
Flash endurance and retention10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C
Thermal resistance junction to ambient40 C/W on this package
Input tolerancealmost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies
USBone OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

This is the widest combination the 144 pin body offers: 1 Mbyte of Flash, the full 128 Kbytes of SRAM, Ethernet with IEEE 1588, the camera interface, two CAN channels and the full memory controller. Where a board has an external SRAM or a NAND for logs, this part is often chosen not for the Flash but for the SRAM and the pin budget that come with the top density.

One megabyte at 120 MHz with the ART accelerator means most code executes without wait states, and the larger Flash also makes field update practical: two 512 Kbyte images can be held in the same device, so an update writes the inactive bank and switches at the next boot rather than overwriting the running image. That pattern is common on equipment that cannot be serviced on site.

Ethernet with IEEE 1588 hardware timestamping is a hardware feature that only pays off with a PHY that supports the same standard. On a board that only needs a data link, any RMII PHY works; on a board that needs sub microsecond synchronization across nodes, the PHY has to carry the timestamp and the reference clock path has to be checked, which is a board level decision made before the part is ordered.

The camera interface and the 16 bit memory bus are the two functions that fight for pins on this package. At 8 or 10 bit camera data both can coexist with RMII; at 12 or 14 bit the data pins take port C and port D bits that the memory bus needs, and the choice becomes a narrower camera or no external memory. Boards that must have both at full width take the 176 pin body.

The LQFP144 at 40 C/W gives roughly 500 mW at 85 C ambient, and this density runs the highest core current of the three in the package because more of the code executes from Flash with the accelerator active. A board that also powers a display backlight or a radio module should be thermally modelled as a whole rather than by summing the datasheet figures for each device.

Where this order code fits

It is the top density in the 144 pin LQFP, 1 Mbyte of Flash and 128 Kbytes of SRAM with Ethernet and the camera interface, the part most often found in networked instruments with a display and an external memory bus. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Does this part support a dual bank field update? The Flash is a single bank, but 1 Mbyte is large enough to hold two 512 Kbyte images, so a bootloader can write the inactive image and switch to it at the next reset. The device itself does not swap banks in hardware on the STM32F2 line.

What is the difference from STM32F217ZGT6? The F217 code adds the cryptographic acceleration block, the analog true random number generator and the 96-bit unique ID. Package, memory, Ethernet, camera interface and pinout are the same.

Can a 14 bit camera and external memory be used at the same time? Not on 144 pins. The 14 bit data bus takes pins the memory controller needs. The practical combinations are 8 or 10 bit camera with a 16 bit memory bus, or the 176 pin body for the full width on both.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Obsolete Part Cross Reference Hub page sets out the checks that keep a substitute from failing on the bench.