Contact Us

STM32F207ZCT6

Brand: ST
ST STM32F207ZCT6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F207ZCT6 — MCU & Embedded Processors | Superb Automation

STM32F207ZCT6

ST — MCU & Embedded Processors

Product Overview

The STM32F207ZCT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F207ZCT6: 256 Kbyte, LQFP144 body

STM32F207ZCT6 is a member of the STM32F205 and STM32F207 performance line described by DS6329 Rev 18. The order code fixes 256 Kbytes of Flash, 96 Kbytes of SRAM, the LQFP144 body at 20 x 20 mm with 144 pins, 114 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.

Order code and memory

Order codeSTM32F207ZCT6
Program Flash256 Kbytes
SRAM96 Kbytes
PackageLQFP144, 20 x 20 mm, 144 pins
Maximum general purpose I/O114
Analog input channels16 external channels per converter
Digital to analog converternot present
External memory controllerfull flexible static memory controller with four chip selects
Supply voltage1.8 to 3.6 V
Maximum CPU clock120 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDS6329 Rev 18

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide
Clock sources4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks
Timerstwo advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts
Serial interfacesthree SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface
DMAtwo DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support
ADCthree 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode
DACtwo 12 bit channels with output buffers
Ethernet10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping
Camera interfaceparallel camera interface, 8 to 14 bit, with its own DMA
Cryptographic accelerationnot present on this part
Programmable voltage detectorprogrammable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset
Debug portserial wire debug and JTAG, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off
Flash endurance and retention10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C
Thermal resistance junction to ambient40 C/W on this package
Input tolerancealmost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies
USBone OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

Three features come together here for the first time in the range: Ethernet, the full memory controller and the camera interface, all on 114 pins with only 256 Kbytes of internal Flash. That combination exists for a specific architecture, an application that runs from external memory or from a small internal image and uses the network for its data path. Boards with the whole application in Flash take a larger density.

The SRAM on this density is 80 Kbytes of SRAM1 plus 16 Kbytes of SRAM2, 96 Kbytes total, and it is the figure that limits a network stack. A TCP stack with a receive window of 8 Kbytes, three sockets and a frame buffer of 1.5 Kbytes fits, but the second buffer for a full duplex path does not. Boards that need a larger window step to the 512 Kbyte or 768 Kbyte part, which brings 128 Kbytes.

Ethernet and the memory controller share port C, port D and port E pins. With MII the address bus of a 16 bit memory interface loses the upper bits it needs on this body, so the practical combination is RMII plus a 16 bit bus. That is a board level constraint, not a silicon limitation, and it is the one that decides whether this part or the 176 pin body is the right one.

The 144 pin LQFP is 40 C/W, so about 500 mW at 85 C ambient. With Ethernet active the MAC and its DMA run continuously and draw current that does not appear in a benchmark without traffic; on a board that also runs the converters and the memory bus, the thermal margin is worth measuring under real traffic rather than at idle.

The 256 Kbyte Flash with 10 kcycles of endurance and 30 years of retention after one kcycle is ample for a bootloader, a network stack and a control loop. The parameter region is the part that gets written, and on this line the 4 Kbytes of backup SRAM in the VBAT domain plus two rotating Flash sectors is the standard arrangement for values written every few minutes.

Where this order code fits

It is the smallest memory density with Ethernet in the 144 pin body, 256 Kbytes of Flash with 96 Kbytes of SRAM, for networked boards that run their application from external memory. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Does this part have both Ethernet and the camera interface? Yes. Both are STM32F207 features and both are present on this device. The F205 line has neither, so a board that needs only the memory controller can use the cheaper F205 equivalent.

What is the SRAM on the 256 Kbyte density? 80 Kbytes of SRAM1 plus 16 Kbytes of SRAM2, 96 Kbytes in total, plus 4 Kbytes of backup SRAM. The 512 Kbyte part and above carry 112 plus 16 Kbytes.

Can the full four chip selects be used with Ethernet on this package? The chip selects are bonded, but pin collisions between MII and the memory bus mean the practical configuration is RMII with a 16 bit bus. Boards that need MII and a wide bus take the 176 pin body.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the BOM Shortage Recovery page sets out the checks that keep a substitute from failing on the bench.