Contact Us

STM32F205VFT6

Brand: ST
ST STM32F205VFT6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F205VFT6 — MCU & Embedded Processors | Superb Automation

STM32F205VFT6

ST — MCU & Embedded Processors

Product Overview

The STM32F205VFT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F205VFT6: 768 Kbyte, LQFP100 body

STM32F205VFT6 is a member of the STM32F205 and STM32F207 performance line described by DS6329 Rev 18. The order code fixes 768 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 82 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.

Order code and memory

Order codeSTM32F205VFT6
Program Flash768 Kbytes
SRAM128 Kbytes
PackageLQFP100, 14 x 14 mm, 100 pins
Maximum general purpose I/O82
Analog input channels16 external channels per converter
Digital to analog converternot present
External memory controllerbank 1 or bank 2 only on this 100 pin body, bank 1 multiplexed NOR or PSRAM on NE1, bank 2 a 16 or 8 bit NAND on NCE2, with no interrupt line because port G is not bonded
Supply voltage1.8 to 3.6 V
Maximum CPU clock120 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDS6329 Rev 18

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide
Clock sources4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks
Timerstwo advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts
Serial interfacesthree SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface
DMAtwo DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support
ADCthree 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode
DACtwo 12 bit channels with output buffers
Ethernetnot present, Ethernet is an STM32F207 feature
Camera interfacenot present on the STM32F205
Cryptographic accelerationnot present on this part
Programmable voltage detectorprogrammable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset
Debug portserial wire debug and JTAG, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off
Flash endurance and retention10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C
Thermal resistance junction to ambient46 C/W on this package
Input tolerancealmost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies
USBone OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

The order code carries four decisions: V is the 100 pin LQFP at 14 x 14 mm, F is 768 Kbytes of Flash, T is the package family and the final 6 is the minus 40 to plus 85 C ambient grade with a 105 C junction limit. The SRAM is not in the string: 768 Kbytes sits in the column where the system memory is 112 Kbytes of SRAM1 plus 16 Kbytes of SRAM2, plus the 4 Kbytes of backup SRAM in the VBAT domain.

The absence of Ethernet is the single most common surprise on this part number. STM32F205 and STM32F207 share a datasheet, a pinout and the same silicon core, but the 10/100 MAC with its dedicated DMA and IEEE 1588 timestamping is only in the F207. A board that specifies F205 for a networked product and later adds an Ethernet PHY finds there is no MAC to drive it, and the fix is a different order code, not firmware.

The flexible static memory controller exists, but on 100 pins it is a reduced version. Only bank 1 with the NE1 chip select, and only in multiplexed NOR or PSRAM mode, or bank 2 in 16 or 8 bit NAND mode, is available. Port G is not bonded on this package, so the interrupt line of the NAND interface cannot be used. Boards that need four chip selects or a non multiplexed interface take the 144 pin body.

Eighty two general purpose pins with two OTG ports is a tight but workable budget. The high speed port needs twelve ULPI pins when an external PHY is used, the full speed port needs two, the three converters share port A and port C, and the debug port takes two more. A board with ULPI, USB full speed, a 16 bit external memory bus and three serial ports is at the limit of this body.

The 14 x 14 mm LQFP100 is rated 46 C/W, so the 20 C between the 85 C ambient grade and the 105 C junction allows about 430 mW. At 120 MHz with the ART accelerator running from Flash the core current alone is a large share of that at 3.3 V, which is why boards in this package that also drive a display bus or an external memory device check the total rather than the core figure alone.

Where this order code fits

It is the 768 Kbyte STM32F205 in the 100 pin body, used where a board wants the 120 MHz core, the USB ports and the three converters but has no need for Ethernet. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Does STM32F205VFT6 support Ethernet? No. The Ethernet MAC is present only in STM32F207 devices. The two lines share the datasheet and the pinout, so the board can be reused, but the network interface needs the F207 order code.

Can the external memory controller drive a 16 bit SRAM on this package? Only in the reduced form the 100 pin body offers: bank 1 in multiplexed mode with the NE1 chip select, or bank 2 as NAND. A non multiplexed 16 bit SRAM interface with separate address and data buses needs the 144 pin or larger body.

What is the SRAM figure for this density? 112 Kbytes of SRAM1 plus 16 Kbytes of SRAM2, 128 Kbytes in total, plus 4 Kbytes of backup SRAM in the VBAT domain. The 256 Kbyte density below it has 80 plus 16 Kbytes, so the step up in memory is larger in SRAM than the Flash number suggests.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.