Contact Us

STM32F101C6T6A

Brand: ST
ST STM32F101C6T6A is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F101C6T6A — MCU & Embedded Processors | Superb Automation

STM32F101C6T6A

ST — MCU & Embedded Processors

Product Overview

The STM32F101C6T6A from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F101C6T6A: 32 Kbyte, LQFP48 body

STM32F101C6T6A is a member of the STM32F101 low density access line described by DocID15058 Rev 6. The order code fixes 32 Kbytes of Flash, 6 Kbytes of SRAM, the LQFP48 body at 7 x 7 mm with 48 pins, 37 general purpose I/O and 10 channels of the 12 bit converter, and the core runs at up to 36 MHz from a 2.0 to 3.6 V supply.

Order code and memory

Order codeSTM32F101C6T6A
Program Flash32 Kbytes
SRAM6 Kbytes
PackageLQFP48, 7 x 7 mm, 48 pins
Maximum general purpose I/O37
Analog input channels10 of the 12 bit converter
Digital to analog converternot present
External memory controllernot present on this line
Supply voltage2.0 to 3.6 V
Maximum CPU clock36 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 36 MHz, 1.25 DMIPS per MHz, single cycle multiply and divide
Timerstwo 16 bit general purpose timers with up to four compare channels each, plus the independent and window watchdogs and the SysTick counter
Serial interfacestwo USARTs, one SPI and one I2C
DMA7 channel DMA controller
ADC12 bit, 1 microsecond conversion, 10 channels on 36 and 48 pins and 16 channels on 64 pins
DACnot present on this line
Stop current11.7 uA typical and 145 uA maximum at 85 C from a 3.3 V supply
Standby current2.4 uA typical with the low speed internal oscillator running and 3.2 uA with it off
Internal RC accuracy8 MHz factory trimmed RC, 1.1 percent at 25 C and 2.2 percent worst case
Flash endurancenot stated in this datasheet revision
Input tolerancealmost all inputs 5 V tolerant
USBnot present, USB full speed is the STM32F102 line
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

C is 48 pins, 6 is 32 Kbytes of Flash, T is LQFP, 6 is the industrial range and A is the internal code that keeps this part inside the low density datasheet. Table 2 of DocID15058 gives 6 Kbytes of SRAM, 37 general purpose I/O, 10 converter channels and two USARTs for this row, with one SPI, one I2C and two general purpose timers.

The 7 channel DMA controller is the feature that separates this part from a comparable 8 bit device: the converter, both USARTs, the SPI and the timers can move data without the core, which is what keeps a 36 MHz part fast enough for a control loop that samples continuously.

6 Kbytes of SRAM is the limit on buffer depth. A 12 bit converter at full rate produces 2 Kbytes per millisecond, so a 1 Kbyte double buffer holds about half a millisecond of history, and anything longer has to be decimated in the interrupt rather than stored.

The 48 pin LQFP is rated 55 C/W, which leaves 364 mW of dissipation inside the 20 C junction margin at 85 C ambient. With two USARTs and a converter running continuously the core draws a small part of that, and the I/O sinks are again the term to check.

Debug costs pins: serial wire debug needs two and JTAG needs five, and on a 37 I/O body that is part of the budget rather than an addition. The same pins return to the application once the debug port is disabled in the option bytes, which is how a production board recovers the last few I/O without changing the package.

Where this order code fits

It is the A coded 32 Kbyte part in a 48 pin body, the natural replacement when a 16 Kbyte board runs out of program space and the footprint cannot grow. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Obsolete Part Cross Reference Hub page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

What is the difference between this and STM32F101C8T6? Flash and SRAM: 32 Kbytes and 6 Kbytes here against 64 Kbytes and 10 Kbytes on the C8T6. The C8T6 is a medium density part, so its peripherals also move up to three USARTs, two SPI and two I2C blocks in the same 48 pin body.

Is the A suffix visible on the package? It is part of the order code that is marked on the device and printed on the reel label, so incoming inspection can separate the two codes without a functional test.

Does the part support a 5 V tolerant input? Almost all I/O are 5 V tolerant according to the feature list, which means a 5 V logic signal can drive a pin while the part itself runs from 2.0 to 3.6 V.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.

Quoting this part means quoting the full string including the A, because the options field at the end of the ordering scheme is where tape and reel appears as TR and where a programmed part appears as xxx. Without either field the code names a tray device, which is what most low volume boards are built from. The check before a purchase order is whether the production firmware still fits after the A code has been fixed in the drawing, since the two codes are interchangeable on the board but not in the qualification file. The temperature grade in both cases is suffix 6, minus 40 to plus 85 C ambient with a 105 C junction limit, and the junction figure is what the thermal calculation in the datasheet works back from.