STM32F100VET6
Product Specifications
STM32F100VET6
ST — MCU & Embedded Processors
Product Overview
The STM32F100VET6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F100VET6: 512 Kbyte, LQFP100 body
STM32F100VET6 is a member of the STM32F100 value line high density described by DS5944 Rev 11. The order code fixes 512 Kbytes of Flash, 32 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 80 general purpose I/O and 16 channels of the 12 bit converter, and the core runs at up to 24 MHz from a 2.0 to 3.6 V supply.
Order code and memory
| Order code | STM32F100VET6 |
| Program Flash | 512 Kbytes |
| SRAM | 32 Kbytes |
| Package | LQFP100, 14 x 14 mm, 100 pins |
| Maximum general purpose I/O | 80 |
| Analog input channels | 16 of the 12 bit converter |
| Digital to analog converter | 2 channels of 12 bits |
| External memory controller | flexible static memory controller, bank 1 only on this body, multiplexed NOR and PSRAM |
| Supply voltage | 2.0 to 3.6 V |
| Maximum CPU clock | 24 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DS5944 Rev 11 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 24 MHz, 1.25 DMIPS per MHz, single cycle multiply and divide |
| Clock sources | 8 MHz factory trimmed internal RC, PLL up to the 24 MHz core clock, external crystal on the high speed oscillator |
| Timers | one advanced-control 16 bit timer with four channels and complementary outputs, ten general-purpose 16 bit timers and two basic timers, which with the two watchdogs is the sixteen the cover counts |
| Serial interfaces | three SPI blocks, two I2C blocks, three USARTs and two UARTs, plus one HDMI CEC channel |
| DMA | 12 channel DMA across two controllers |
| ADC | 12 bit successive approximation, 16 channels, conversion range 0 to 3.6 V |
| DAC | 2 channels of 12 bits with output buffers |
| Programmable voltage detector | eight falling thresholds from 2.00 V to 2.88 V nominal, each with a rising edge about 100 mV higher |
| Debug port | serial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits |
| Backup domain | VBAT domain keeps the RTC, the backup registers and the tamper input alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C, 1 kcycle at 105 C, 30 years of retention at 85 C after one kcycle and 10 years at 105 C |
| Thermal resistance junction to ambient | 40 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant |
| USB | not present, USB full speed is the STM32F102 line |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
This is the largest unlettered code in the value line: 512 Kbytes of Flash, 32 Kbytes of SRAM, 80 general purpose I/O and the bank 1 memory controller on a 100 pin 14 x 14 mm body. The core stays at 24 MHz, so the part is about capacity and interfaces rather than speed. Equipment that needs more arithmetic is the STM32F103 line, and equipment that needs more analog or a different pin out is a different family entirely.
Sixteen timers with one advanced-control block, ten general purpose timers and two basic timers is the resource that makes this part suitable for multi channel equipment. A single board can run a three phase bridge from the advanced timer, four independent PWM channels from general purpose timers, an encoder interface, a capture channel and a timebase, and still have the two basic timers free to trigger the converter and the DAC.
The 32 Kbytes of SRAM with a 512 Kbyte image is a mismatch that catches people out: the program space suggests a large application and the working memory does not grow with it. A graphics library with a font table fits in Flash and its frame buffers do not fit in SRAM, so a colour display still needs external memory or a controller with its own buffer. Justifying the 512 Kbyte code on program size alone is the safe way to choose it.
The memory controller on the 100 pin body is bank 1 with a multiplexed NOR or PSRAM interface. That is enough for PSRAM used as a frame buffer or a data buffer and for a NOR device used for code or data, and it is not enough for NAND or for two devices with separate chip selects. The second bank and the additional chip selects belong to the 144 pin body, which is a larger footprint and a different board outline.
At 40 C/W the package allows about 500 mW between an 85 C ambient and the 105 C junction limit. A part with a parallel bus, 80 I/O and a display is the case where the I/O current is a real share of the total, and the ground return under the bus is what keeps the analog side usable. The reference pin, the analog supply pins and the converter inputs all sit in the same package as the bus, so the board has to separate them.
Flash endurance of 10 kcycles at minus 40 to plus 85 C and retention of 30 years at 85 C after one kcycle is the figure to check against a field update plan. Two 256 Kbyte slots are practical at this size, and an update writes one slot per event. Equipment that is updated several times a year stays well inside the rating; equipment that reflashes weekly does not, and the update path then belongs outside the program Flash.
The converter and the two DAC channels are the same blocks as on the smaller high density codes, with 16 channels and buffered outputs. On a board that uses the bus heavily, the converter is best triggered from a timer at a fixed point in the switching period rather than from software, and the DMA should move the results. That arrangement keeps the sample instants repeatable even when the core is busy with the display.
Where this order code fits
It is the plain 512 Kbyte, 100 pin value line code, the largest unlettered part in the family and the one most often chosen when a long lived product needs the maximum program space. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Supplier Quality Audit page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
Is this the largest part in the value line? Yes, 512 Kbytes of Flash is the maximum, and the SRAM tops out at 32 Kbytes. Above this the STM32F103 performance line offers the same memory sizes with a 72 MHz core and USB, on a pin out that is compatible in family but not identical in function.
What is the difference in SRAM between the 384 and 512 Kbyte codes? None. Both have 32 Kbytes. The 256 Kbyte codes have 24 Kbytes, so the SRAM step happens between 256 and 384 Kbytes rather than between 384 and 512.
Can I run the part from a 5 V rail? No. The operating range is 2.0 to 3.6 V. Almost all inputs are 5 V tolerant, which is a logic level on a pin and not permission to power the device from 5 V, so a 5 V system still needs a 3.3 V regulator in front of it.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.