Contact Us

ISP1763AHNUM

Brand: ST
ISP1763AHNUM is a automotive-grade IC from STMicroelectronics, designed for drone electronics, embedded systems, and industrial applications. Superb Automation supplies genuine ISP1763AHNUM with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

ISP1763AHNUM — USB Host Controller IC by STMicroelectronics

The ISP1763AHNUM is an STMicroelectronics usb host controller ic in N/A. Supplied by SUPERB Automation with verified sourcing.

Part Number Decoded — Field by Field

FieldValueMeaning
ISP1763AHNUMFull Part NumberSTMicroelectronics USB Host Controller IC

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberISP1763AHNUM
PackageN/A
CategoryUSB Host Controller IC
QualificationIndustrial / Automotive

Product Overview

The ISP1763AHNUM is an STMicroelectronics usb host controller ic in N/A package. Engineered with ST's proven semiconductor technology and quality manufacturing processes, it delivers reliable performance for a wide range of electronic applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

STMicroelectronics Quality & Reliability

Backed by ST's rigorous qualification testing, statistical process control, and decades of semiconductor manufacturing excellence — ensuring consistent, reliable performance across production batches.

Industrial Temperature Range

Designed for reliable operation across industrial temperature ranges, suitable for outdoor, automotive, and factory-floor environments where temperature extremes challenge lesser components.

Global Availability via SUPERB Automation

SUPERB Automation maintains verified supply channels for genuine STMicroelectronics components, with competitive pricing and lead times from prototype quantities to full production volumes.

Target Applications

Embedded & IoT Systems

Integrates into microcontroller-based designs, sensor interfaces, and IoT endpoints requiring reliable electronic components from a trusted manufacturer.

Industrial Control & Automation

Suitable for industrial PLCs, motor drives, sensor transmitters, and factory automation equipment demanding components with proven field reliability.

Consumer & Automotive Electronics

Used in consumer devices, automotive subsystems, and general electronic designs benefiting from ST's broad product portfolio and manufacturing scale.

Frequently Asked Questions

Where can I find the datasheet for ISP1763AHNUM?

The official datasheet is available on STMicroelectronics' website (st.com). SUPERB Automation can also provide documentation and application support upon request.

Is this part in stock and available?

SUPERB Automation supplies genuine STMicroelectronics ISP1763AHNUM through verified sourcing channels. Contact us with your target quantity and timeline for current availability and pricing.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes with flexible packaging options (tray, cut tape, or full reel).

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics ISP1763AHNUM with full traceability and batch-level QA documentation. Whether you need prototype quantities or production volumes, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

ISP1763AHNUM: a Hi-Speed USB OTG controller for a processor without one

Not every processor that needs a 480 Mbit per second port has one inside. The ISP1763A is a single chip that brings a Hi-Speed USB On-The-Go controller, an Enhanced Host Controller Interface core and a peripheral controller together behind an 8-bit or 16-bit parallel bus, so a microcontroller with no USB block at all can still present a compliant host port and a compliant device port. The H in this order code is the HVQFN or VFQFPN 64 body at 9 mm by 9 mm, and the N U M suffix is the packing and the temperature grade of the industrial part.

Two ports come out of the chip. Port 1 can be a downstream host port, an upstream device port or the OTG port, and port 2 is always downstream with session request detection from the B device. The OTG port supports host negotiation and session request as defined in the On-The-Go supplement 1.3. Everything in this page is read from the ISP1763A product data sheet, Rev 04 of October 2013.

What the part actually provides

ComplianceUSB specification Rev 2.0 and the OTG supplement Rev 1.3
Host speedHigh speed 480 Mbit per second, full speed 12 Mbit per second, low speed 1.5 Mbit per second, with high speed disable per port
Device speedHigh speed and full speed
Transaction translatorIntegrated, so full speed and low speed devices run behind a high speed hub
Host controllerEHCI core adapted from the EHCI specification Rev 1.0
Bus interface8-bit or 16-bit parallel, processor I/O at 1.8 V or 3.3 V
ClockIntegrated PLL for a 12 MHz, 19.2 MHz or 24 MHz crystal, or a direct clock input
FIFO4 Kbytes of internal FIFO shared across the endpoints
DMARequest and acknowledge lines for a channel on the host processor
InterruptOne configurable interrupt line for host, device and OTG events
Power modesHybrid power, where the 3.3 V supply is absent and only the I/O rail is present
Current, host mode20 mA with one port working, 36 mA with both
Current, high speed55 mA
PackagesVFQFPN64 and TFBGA64, RoHS compliant, halogen free and lead free

Where this part still makes sense in 2026

The honest answer is that most new products pick a processor with the PHY inside. This part stays relevant where the processor was chosen for something else and cannot be changed: an industrial single board computer with a long qualification, a medical instrument with a frozen firmware platform, a legacy control card whose bus timing is already proven. Replacing the processor to gain a USB port would mean a new board, a new validation and possibly a new certification, and a parallel bus controller costs a fraction of that.

The second case is a product that needs two independent host ports. A chip with one OTG port gives one, and a hub adds cost and a failure point. The ISP1763A gives two ports with the transaction translator inside, so a keyboard, a barcode reader or a memory stick at full speed work behind the high speed host without an external hub.

The third is the bus. An 8-bit parallel interface on a 40 MHz memory bus transfers a packet faster than a full speed serial link, and it does so without competing for the pins that the application's own peripherals need. On a board where the processor has a spare static memory chip select, the connection is four control lines, the data bus and the address lines the part needs. Our obsolete part cross reference hub page is where we keep the alternatives for parts in this situation, because a 2013 controller is exactly the kind of line that goes last time buy without warning.

The engineering detail that catches people

The 3.3 V rail is optional. In hybrid power mode the chip runs with only the I/O supply present, and the internal regulator is bypassed or fed from an external source depending on the configuration straps. A board that ties the two rails together works, but it loses the ability to keep the interface alive while the analog side is off, which is the reason the mode exists. Read the power section before the circuit drawing, not after.

The OTG port also has to source and sink 5 V, and that means a charge pump or a switch with a comparator plus a discharge path on VBUS. The controller handles the signalling of host negotiation and session request, not the power. A board that omits the VBUS switch enumerates as a device and never as a host, and the symptom is a port that works on a cable to a PC and not with a memory stick.

The second trap is the 4 Kbyte FIFO. It is shared across the endpoints, and at high speed a single bulk transfer can fill it before the host processor has serviced the interrupt. The DMA channel exists for that reason, and a product that polls instead of using it will hit an overrun at exactly the throughput the part is bought for. The third is the clock: a 12 MHz crystal is the common choice, and the PLL multiplier for 480 Mbit per second needs the crystal tolerance the document specifies rather than the cheapest part on the shelf.

Driver support is the cost that does not appear on the quotation. The host side is EHCI compatible, so a Linux or a Windows stack recognises the controller with little glue, and a bare metal or an RTOS product needs a driver written against the register set. That work is measured in weeks, and it is the reason a part like this is usually chosen by a team that already has the driver rather than by one starting from an empty project.

The other half of that cost is the board support: a device tree entry, a clock and a reset line, and a power sequence that matches the chip's own requirements. On a project that has done it once, the second product on the same controller is nearly free, and that is the argument for reusing the part across a product family rather than picking a new controller each time.

Assembly of a 64 pin QFN at 0.5 mm pitch is routine, and the exposed pad needs the via field and the paste window that any thermally enhanced body needs. Our tooling and stencil control page sets out the aperture rules we apply, and the same page covers the inspection step that confirms the pad wetting on a first article.

The 1.8 V and 3.3 V interface option is a separate supply pin pair, not a configuration bit, so the choice is made on the board. A processor running its bus at 1.8 V saves level shifters and a rail, and it also reduces the drive strength, which matters on a long ribbon between two cards. A short bus at 3.3 V is the simpler arrangement, and the two cannot be mixed on one board without a translator in the middle.

Questions an order raises

Is the part still active? The document is Rev 04 from 2013, and NXP has moved its USB controller line since. Checking the lifecycle status before a production release is not optional on a part of this age, and the component obsolescence management page describes how we hold a last time buy and a qualified alternative for lines like this.

Does the 1.8 V I/O option change the bus timing? It changes the drive strength and the input thresholds, so the timing budget has to be recomputed rather than copied from a 3.3 V board. On a short bus at 40 MHz that is a formality, and on a long one it is the difference between a working link and an intermittent one. Our incoming inspection plan records the date code and the packaging for each reel, which matters when a controller this old arrives from more than one source.