Contact Us

VBP112MC60

Brand: VBsemi
VBsemi VBP112MC60 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBP112MC60 — Discrete & Power Semiconductors | Superb Automation

VBP112MC60

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBP112MC60 from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBP112MC60: 1200 V and 60 A silicon carbide in a TO247

The VBP112MC60 is the larger die of the 1200 V silicon carbide pair in a TO247 body. Drain to source is 1200 V, the gate window is minus 10 V to plus 22 V, the threshold is 2 to 4 V, the printed drain current is 60 A and the on resistance is 40 milliohm at an 18 V gate. The structure is listed as SiC-S.

Forty milliohm at 1200 V is half the resistance of the 30 A member of the family and it is bought with area. At 60 A the die makes 144 W, at 30 A it makes 36 W, at 20 A it makes 16 W, at 10 A it makes 4 W. A TO247 on a good sink holds 40 to 50 W, so 30 A continuous is a real operating point and 60 A is not.

The class is the same as the smaller part: 800 V battery systems, 690 V drives, 1000 V solar strings, 1200 V rails. The choice between the two dies is made on current and on the thermal path, exactly as in the silicon bands, but the numbers are different because the resistance rises with temperature and the switching loss is larger at this voltage.

Key data for the VBP112MC60

ConfigurationSingle N channel
PackageTO247, bolted to a heatsink
VDS1200 V
VGEMinus 10 V to plus 22 V
Vth2 to 4 V
ID60 A, a die figure at a 25 C case
RDS(on) at 18 V40 milliohm
TechnologySilicon carbide
Loss at 10 A4 W
Loss at 20 A16 W
Loss at 30 A36 W
Loss at 60 A144 W

Thermal behaviour with a positive temperature coefficient

The printed 40 milliohm is a 25 C figure. At 125 C the same die is 65 to 80 milliohm, so 30 A becomes 58 to 72 W rather than 36 W. That is the number the heatsink has to remove, and a converter sized on the cold figure will fail its thermal test in the chamber even though it passes on the bench.

The positive coefficient has one advantage: two or three devices in parallel share current without emitter resistors, because the hotter die takes less. The sharing is not perfect, since the dies are not identical and the gate drive is not identical, but it is good enough that a 60 A load is commonly built as two 30 A parts on one sink rather than one large die in a bigger package.

Gate drive is the other thermal input. At 18 V on and minus 4 V off the gate charge is larger than a silicon part of the same current, so the driver has to supply more current at the same transition time. A weak driver turns the part on slowly, which puts the die in the linear region for longer and adds loss at every edge.

The gate charge is the third thermal input and it is easy to miss. A 1200 V die of this area needs a gate charge in the hundreds of nanocoulombs, and at 50 kHz that charge is moved fifty thousand times a second. The driver dissipates the product of charge and voltage, which at 18 V is a couple of watts, and that heat sits in the driver rather than in the switch, so the driver needs its own thermal path on the board.

The freewheel path in a bridge

Silicon carbide MOSFETs have a body diode with a forward drop of about 4.5 V at rated current, which is far higher than the 0.8 V of a silicon body diode. In a bridge leg the diode carries current only during the dead time, so the loss is small if the dead time is short, but the diode also sets the voltage the opposite device sees at turn on.

Most circuits place a SiC Schottky in parallel with the body diode. The Schottky has a lower forward drop and essentially no recovery, so it carries the freewheel current and the MOSFET body diode never turns on hard. That removes the recovery loss and the associated ringing, at the cost of one more part per switch.

Where the topology never forces the diode to conduct, as in a synchronous buck that keeps one device on at all times, the external diode is unnecessary. Where the topology has a dead time, as in every bridge, it is the normal practice and it should be on the BOM from the start rather than added after the first ringing problem.

Where the part fits and where it does not

It fits a 30 A three phase inverter on an 800 V bus, a 690 V drive, a solar inverter at 1000 V, a charger for a high voltage battery, an active front end and an induction heating supply. It does not fit a 400 V bus where silicon is cheaper, a 60 A continuous load in a TO247, or a driver without an 18 V rail and a negative off bias.

Where this part is used against an IGBT, the whole gate drive and freewheel arrangement changes, and the qualification has to include the short circuit withstand time, which is shorter for a SiC MOSFET than for an IGBT. Our one stop BOM sourcing page covers how the switch, the diode, the driver and the passives are bought as one set rather than as separate lines.

The sourcing side of this part is covered on the supplier corrective action. For a wide bandgap line in a new product, that page covers how a failure is closed out at the source.

Questions we get on this code

Is 60 A usable? Not continuously. At 60 A the die makes 144 W at 25 C and more when hot. Thirty amps on a good sink is the working point.

Does the resistance really double when hot? It rises by 1.6 to 2 times from 25 C to 125 C, which is normal for SiC. The heatsink has to be sized on the hot figure.

Can it be paralleled? Yes, and the positive temperature coefficient helps the sharing. The gate drive and the wiring still have to be symmetric.

What does the order carry? Part number, TO247, and tube packing. We confirm the packing and the date code on the offer.