Contact Us

VBM18R09S

Brand: VBsemi
VBsemi VBM18R09S is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBM18R09S — Discrete & Power Semiconductors | Superb Automation

VBM18R09S

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBM18R09S from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBM18R09S: 800 V and 9 A with 600 milliohm in a TO220

The VBM18R09S is the next die up in the same 800 V class inside a TO220 body. Drain to source is 800 V, the gate window is plus or minus 30 V, the threshold is 3.5 V, the printed drain current is 9 A and the on resistance is 600 milliohm at a 10 V gate. The die is SJ multiple epitaxy, the same structure as the 6 A member of the band.

The step from 800 to 600 milliohm is a 25 per cent reduction in conduction loss at the same current, and it is bought with die area rather than with a different technology. At 3 A the two parts make 7.2 W and 5.4 W. At 5 A they make 20 W and 15 W. The gain is real but it does not change what the package can remove, which is the point most comparisons miss.

Nine amps at 600 milliohm is 48.6 W. That number is not a working point, it is a warning that the current column and the thermal path are separate questions. This body with a copper island holds 3 to 5 W, which is 2 to 3 A, and with a bolted heatsink it holds 12 to 15 W, which is 4 to 5 A.

Key data for the VBM18R09S

ConfigurationSingle N channel
PackageTO220, through hole with the tab on the drain
VDS800 V
VGSPlus or minus 30 V
Vth3.5 V typical
ID9 A, a die figure at a 25 C case
RDS(on) at 10 V600 milliohm
TechnologySJ multiple epitaxy
Loss at 2 A2.4 W
Loss at 3 A5.4 W
Loss at 5 A15 W
Loss at 9 A48.6 W

The difference between 600 and 800 milliohm in a real circuit

In a flyback that runs at 2 A average with a peak of 5 A, the conduction loss is set by the root mean square current through the switch, not by the peak. At a duty cycle of 0.35 the root mean square is about 3 A, so the two parts make 5.4 W and 7.2 W. On a heatsink that is 1.8 W of difference, which is a small change in sink size and a large change in price at volume.

In a continuous conduction converter the switch carries current for most of the period and the difference grows with the duty cycle. At a duty of 0.7 and a 4 A root mean square the pair makes 9.6 W and 12.8 W, and the 3 W difference decides whether the part needs a heatsink at all.

The switching side moves the other way. The larger die carries more gate charge and more output capacitance, so at a fixed drive the crossover is slower and the stored energy per cycle is larger. Above 100 kHz the larger die can lose more in switching than it saves in conduction, which is why a bigger die is not automatically the better part in a high frequency circuit.

Gate drive and the Miller hazard at 800 V

A 3.5 V threshold and a plus or minus 30 V window is a comfortable combination for a 10 to 12 V drive with a negative off bias. At 800 V the drain swings far in a short time, and the Miller capacitance couples a current into the gate at every turn off of the opposite device. If the gate is held at zero through a weak resistor, the resulting pulse can reach the threshold and turn the device partly on while the opposite leg is conducting.

Two measures control it. The first is a gate resistor sized for the turn off the converter needs, not the fastest the driver can produce. The second is a low impedance path from gate to source at rest, which means a driver with an active pull down or a resistor to the source close to the pin. A negative bias of 3 to 5 V is the third and the most effective at this voltage.

The gate loop is part of the same question. A long return from the source pin to the driver adds inductance that turns the Miller current into a voltage at the gate, so the driver has to sit close to the device with a short return, and the source connection has to carry the gate current without sharing the power path.

Where the part fits and where it does not

It fits a 10 to 30 W flyback on a 480 V AC line, an auxiliary supply in a motor drive, a power factor correction stage below 30 W, a start up circuit and a high voltage load switch at a few amps. It does not fit a 400 V bus at 20 A, a 690 V line, or a 200 kHz converter where the switching term dominates.

When this part is offered as a replacement for a discontinued high voltage code, the useful comparison is on the voltage margin, the resistance at the real gate voltage and the recovery of the body diode, because a part that wins on resistance and loses on recovery can run hotter in the same socket. Our obsolete part cross reference hub page covers how such a replacement is checked before a sample is ordered.

The sourcing side of this part is covered on the safety stock planning. For a part that only a few suppliers make, that page covers how a buffer is sized against the build plan.

Questions we get on this code

Is the 25 per cent lower resistance worth the larger die? At 3 A it saves 1.8 W, which matters on a copper island and matters little on a heatsink with margin. Price decides at low current.

Can it be driven from 12 V? Yes, and 12 V is close to the best point for this die. A 5 V drive leaves it well above the printed resistance and is not recommended.

Does it need a snubber? In a flyback with a fast diode and a tight loop, usually a small RC across the diode. The drain ringing at 800 V can otherwise exceed the rating.

What does the order carry? Part number, TO220, tube packing, and the date code. We confirm both on the offer.