Contact Us

HXNM40012

Brand: Hisiwell
Hisiwell HXNM40012 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXNM40012 — Discrete & Power Semiconductors | Superb Automation

HXNM40012

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXNM40012 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXNM40012: sixteen watts across the whole 8 to 12 GHz band

The HXNM40012 is a gallium nitride internally matched power amplifier module covering 8 to 12 GHz. Hisiwell builds it on in-plane matching synthesis with thin film hybrid integration, and specifies 50 ohm at both ports. The index row reads 8 to 12 GHz, saturation output at least 42 dBm, gain at least 20 dB, drain efficiency at least 30 per cent, 28 V drain rail, continuous wave, flatness not printed.

42 dBm is 15.85 W, and the band is 4 GHz wide. That combination is the reason the part exists. An octave wide, internally matched module at sixteen watts is a different product from a narrow band radar transistor: it is the transmitter block for a system that has to work anywhere in X band without a tuned output network, and it is what a wideband test source, an electronic warfare front end or a multi-band radar uses when the frequency plan is not fixed at the time the hardware is built.

The 40 per cent fractional bandwidth is high for a matched module and it is bought with gain. Twenty decibels from one stage means the drive for rated output is 22 dBm, which is 158 mW. That is a real driver stage, so this part sits behind a 20 dBm amplifier rather than behind an exciter. In a two stage line the total gain is 40 dB, which is more than most transmitters need, so the driver usually runs backed off and the margin goes into flatness and linearity rather than into output.

At 30 per cent efficiency the module draws 52.83 W from the rail at saturation, which is 1.89 A at 28 V, and leaves 36.98 W of heat. Those figures are calculated from the published rows and are labelled as calculated, because the vendor prints output and efficiency and nothing else. Thirty seven watts of heat in a small flange is the number that decides the carrier and the airflow, not the output figure.

The parameter rows Hisiwell publishes for HXNM40012

Part classGallium nitride internally matched power amplifier module
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range8 to 12 GHz
Bandwidth, calculated4000 MHz, 40 per cent fractional at a 10 GHz centre
Saturation output power as publishedat least 42 dBm
Saturation output power in watts, calculated15.85 W
Output at 1 dB compression as publishednot published, the index prints a slash in that column
Gain as publishedat least 20 dB
Drain efficiency as publishedat least 30 per cent
Drain voltage28 V
Input and output impedance50 ohm, matched
Flatness across the bandnot published, the index prints a slash
Operating modecontinuous wave
Drive power for the rated output, calculated22 dBm, 158 mW
DC input at saturation, calculated52.83 W
Drain current at saturation, calculated1.89 A at 28 V
Dissipation at saturation, calculated36.98 W
Dissipation if efficiency reaches 60 per cent, calculated10.57 W
Output per 100 MHz of the band, calculated0.396 W
Load voltage at saturation into 50 ohm, calculated28.15 V RMS, 39.81 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parameters and gain flatness datanot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Narrow band neighbour at 44 dBm on 9.3 to 9.5 GHz, pulsedHXNM40015, 20 dB gain

Thirty seven watts of heat in an X band module

A 37 W dissipation is a small soldering iron held against a flange. On a carrier offering 2 C per watt the case rise is 74 C, which leaves very little between a 25 C base plate and a junction that the vendor does not publish. On 1 C per watt the rise is 37 C and the part becomes workable. The difference between those two carriers is not the heatsink compound, it is the metal.

The thermal path should be settled before the board is drawn. A copper tungsten carrier, a metal matrix composite or a thick copper block all work, and each has a different coefficient of expansion against the alumina in the module. Bolting a part of this class to an aluminium plate with four screws and a thermal pad will run, and it will also show a flange temperature that rises sharply at the corners of the tuning range, because the match changes with temperature and the efficiency falls as the flange heats.

Because efficiency is a minimum, the real part may run above 30 per cent. At 40 per cent the dissipation falls from 37 W to 23.8 W, which is a third less heat. That margin should be treated as a reserve for the hot end of the operating range and for ageing, not spent on a smaller carrier in the first build.

The 28 V rail at 1.89 A is not a large current, but the bias network has to hold it stable while the drain current pulses with the waveform. A supply that sags by a volt under load changes the compression point, and this module has no published figure for supply pushing. A local bulk capacitor at the flange and a short, wide track back to the regulator are part of the part's specification in practice even though they never appear in the vendor row.

What an octave of bandwidth buys and costs

Four gigahertz of matched bandwidth means the transmitter does not need a band select filter ahead of the final stage. That removes a switch, a filter set and the insertion loss they bring, and it lets one hardware build cover the whole of X band. For a radar with several operating bands, or for a test instrument that has to sweep from 8 to 12 GHz, the module replaces the entire output section.

The cost is gain and efficiency. A narrow band radar transistor on 9.3 to 9.5 GHz delivers 44 dBm with 20 dB of gain and 35 per cent efficiency from the same 28 V rail. This part delivers 15.85 W against 25.1 W, with the same 20 dB of gain, across twenty times the bandwidth. The narrow part is worth 2 dB at the antenna and the wide part is worth the whole band.

The second cost is harmonic and spurious content at the band edges. A matched module working near the top of its range has less loop gain available for the matching network, so the second harmonic of a 9 GHz signal at 18 GHz sits outside the specified range and is not characterised. Systems with a strict spurious limit should plan an output low pass filter and a measurement at the band edges rather than in the middle.

The third cost is flatness. The vendor prints a slash in the flatness column, so the variation across 4 GHz is unknown. Internally matched modules of this class commonly move plus or minus 1.5 dB across an octave, and a system with an automatic gain control loop can absorb that. A system with a fixed gain budget cannot, and needs the response measured on a first article before the level plan is frozen.

Where 8 to 12 GHz is used and how this part fits

X band carries marine and weather radar, airborne mapping radar, satellite communication in the 7.25 to 8.4 GHz and 10.7 to 12.75 GHz windows, and a large share of defence datalinks. A sixteen watt module with an octave of bandwidth fits the ground segment of those systems and the transmitter of a test set that has to cover all of them.

In a datalink terminal the modulation is usually constant envelope or low order, so the part runs near saturation and the 30 per cent efficiency figure applies. In a radar the waveform is pulsed and the average dissipation falls with the duty cycle, but the vendor does not publish a pulse rating for this part, and the index mode column says continuous wave. Running a continuous wave part in a pulsed radar is acceptable when the pulse length and duty are inside the thermal limit, and that limit has to be computed from the 37 W saturation figure and the duty cycle rather than assumed.

In a satellite ground station the transmitter is often specified at a fixed output with a high linearity requirement. This part at 42 dBm saturation gives about 36 dBm at six decibels of back off, and the efficiency at that point falls well below 30 per cent. A station that runs at back off all day should size the supply and the carrier for the back off case, not for saturation.

Our defence grade component page covers the screening, traceability and documentation questions that come with this band, and it is the right place to start when the product has to carry a qualification file rather than a bench record.

Choosing between HXNM40012 and its neighbours

The same family covers 9.3 to 9.5 GHz with the HXNM40015 at 44 dBm and 20 dB of gain, pulsed. It is 2 dB stronger and twenty times narrower, which is the right answer for a fixed frequency radar and the wrong answer for a wideband instrument. The HXNM40008 covers 4.4 to 5.0 GHz at 43 dBm with 23 dB of gain, so the family steps down in frequency in a regular way and each member is built around one octave or less.

On the GaAs side the closest parts are the HXC40035 to HXC40037 on 8.5 to 9.6 GHz at 36 to 41 dBm compression with 8 dB of gain on a 10 V rail. They carry a third of the output, a quarter of the gain and a lower supply, which suits a battery product or a linear application where 28 V is not available.

For a cross reference the order matters: rail, mode, band, output, gain. A part that matches output but runs on 10 V cannot replace this one, and a part that matches the rail but covers 9.3 to 9.5 GHz only cannot serve a wideband product. Our RF power transistor cross reference page sets out that sequence and the questions we ask before a candidate goes on a bench.

Questions buyers ask before ordering HXNM40012

Is there a data sheet? No. The vendor publishes an index row and a product page with the same five figures: band, saturation output, gain, efficiency and the 50 ohm port impedance. There are no curves, no scattering parameters, no thermal resistance and no package drawing. Anything beyond those five figures has to be measured or confirmed in writing by the factory.

Can it be used pulsed? The index lists it as continuous wave, which is the more demanding case thermally. A pulsed duty cycle reduces the average dissipation, and the peak dissipation stays at 37 W during the pulse. The pulse width and duty have to be checked against the junction temperature that the carrier can hold, and the vendor publishes no junction to case figure, so that check is a measurement on the first article.

What has to be on the purchase order? The band, the 28 V rail, the continuous wave mode and the quantity. No published orderable addendum, marking code or packing column exists, so reel size and moisture level come from the factory quotation rather than from a document we can cite.

How do we start? Send the band, the output required at the antenna connector, the drive available and the rail. We will confirm the fit against this part and its neighbours, quote from the current factory schedule and ship a sample with measured output, gain and flatness at 8, 10 and 12 GHz.