Contact Us

HXNM40006

Brand: Hisiwell
Hisiwell HXNM40006 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXNM40006 — Discrete & Power Semiconductors | Superb Automation

HXNM40006

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXNM40006 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXNM40006: four watts at 4.5 to 5 GHz with a ten decibel milliwatt drive

The HXNM40006 is the smallest member of the Hisiwell high gain family on the lower C band. The vendor index row reads 4.5 to 5 GHz, saturated output at least 36 dBm, gain at least 26 dB, drain efficiency at least 40 per cent, 28 V drain rail, continuous wave. That is 3.98 W across 500 MHz with a drive requirement of 10 dBm, which is 10 mW.

Ten milliwatts of drive is the level a synthesizer or a modulator produces directly. That makes this part usable as the only amplifier after the signal source, with no driver stage and no interstage match. For a small transmitter, an instrument output or a test source, that is the whole chain in one device.

The power budget is modest. At 40 per cent efficiency 3.98 W of output draws 10.0 W from the rail, which is 0.355 A at 28 V, and leaves 6.0 W of heat. Those are calculated figures from the published rows, and they are low enough for a conventional board with a copper paddle.

Five hundred megahertz at a 4.75 GHz centre is 10.53 per cent fractional bandwidth, the narrowest window in the high gain family. That is a channelised part rather than a band part, and it suits a fixed allocation where the filter at the output does the channel selection.

The parameter rows Hisiwell publishes for HXNM40006

Part classGallium nitride power transistor, internally matched, high gain family
Frequency range4.5 to 5 GHz
Bandwidth, calculated500 MHz, 10.53 per cent fractional at a 4.75 GHz centre
Saturation output power as publishedat least 36 dBm
Saturation output power in watts, calculated3.98 W
Gain as publishedat least 26 dB
Drain efficiency as publishedat least 40 per cent
Drain voltage28 V
Flatness across the bandnot published, the index prints a slash in that column
Operating modecontinuous wave
Output at 1 dB compressionnot published, the index prints a slash in that column
DC input at saturation, calculated10.0 W
Drain current at saturation, calculated0.355 A at 28 V
Dissipation at saturation, calculated6.0 W
Dissipation if efficiency falls to 30 per cent, calculated9.3 W
Drive power for the rated output, calculated10 dBm, 10.0 mW
Output per 100 MHz of the band, calculated0.80 W
Load voltage at saturation into 50 ohm, calculated14.1 V RMS, 20.0 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Stability data and load mismatch tolerancenot published
Pinch off voltage and gate bias pointnot published
Operating and storage temperaturenot published
Orderable addendum and packingnot published
Family neighbour at 40 dBm on 4.4 to 5 GHzHXNM40007, same rail, same gain floor

Ten milliwatts of drive and the source that produces it

A synthesizer with a buffered output delivers 10 dBm without difficulty, and so does a vector modulator followed by a small amplifier. The point is that the source is a signal generator, not a power stage, so the board does not need a driver, its bias network or its thermal path.

What the source has to provide is a clean 50 ohm. A 26 dB part with a source that is reactive at some out of band frequency will find a resonance, and the input pad is the cheap cure. A 3 dB pad costs half the drive margin and returns 6 dB of match at every frequency, which on a 10 dBm drive leaves 7 dBm and still saturates the part.

The gain figure also means the source noise is amplified by 26 dB. For a transmit chain that is irrelevant, and for a chain where this part sits near a receiver it would matter a great deal. The part is a power stage, not a low noise amplifier, and the vendor publishes no noise figure for it.

Where the system has to vary the output level, the gain control belongs at the source rather than at the drain. Varying the drain voltage moves the gain and the compression point together, and it changes the match, so a system that needs a controlled ramp usually does it with a variable attenuator in front of this part.

Five hundred megahertz at 4.75 GHz in practice

The window covers the 4.5 to 5 GHz portion of the lower C band fixed link allocations. It does not reach the 4.4 GHz bottom edge that HXNM40007 covers, so a system that has to work down to 4.4 GHz needs the wider part rather than this one.

Five hundred megahertz is 10.53 per cent, which is wide enough for a channel plan of several 40 or 80 MHz channels and narrow enough that the output filter can be a practical cavity or combline part. That combination suits a fixed link terminal where the channel is set by the operator rather than by the hardware.

The narrow window also means the match is easier to hold flat, and a narrower match usually gives more gain for the same die. The 26 dB floor here is 3 dB above the 23 dB of the 20 W member on the same band, which is consistent with the narrower window.

Where the application is a laboratory source that has to sweep 4.4 to 5 GHz, this part is not the right choice: the bottom 100 MHz is outside its window. HXNM40007 covers 4.4 to 5 GHz at the same 40 dBm and the same rail, and it is the part to specify for a sweep.

Thermal notes at four watts

6.0 W of dissipation is low enough that a copper paddle with a via field carries it. On 5 C per watt the rise is 30 C over the case and on 3 C per watt it is 18 C, so at a 70 C ambient the case sits at 100 C or 88 C. The first figure is at the limit and the second is inside it, which is the usual reason to spend on a better carrier.

No junction to case figure is published, so the case temperature is what a build record can actually state. A thirty minute run at saturation with a thermocouple on the flange is the measurement, and it should be repeated at the top of the ambient range rather than only at room temperature.

The drain current at 0.355 A is small enough for a thin trace, and the decoupling bank is a few ceramics rather than an electrolytic. The bias network still needs to be stable, because at 26 dB of gain a drift in the quiescent point moves the gain and the compression point together.

No moisture level is published. For a production program the factory should confirm it before the assembly flow is fixed, because a part that needs baking changes the schedule. The one stop RF supply route covers that confirmation together with the packing and the marking.

The high gain family on C band

Three members cover C band in this family. HXNM40006 is the 36 dBm part on 4.5 to 5 GHz with 26 dB gain, HXNM40007 is the 40 dBm part on 4.4 to 5 GHz with 26 dB gain, and HXNM40008 is the 43 dBm part on 4.4 to 5 GHz with 23 dB gain.

The pattern is that output rises and gain falls across the three, and the efficiency falls with the output as well: 40 per cent, 45 per cent and 30 per cent. The middle member is the most efficient of the three, which makes it the natural default when the system can use 10 W.

This part is the one to choose when the output requirement is 4 W and the source is a synthesizer. Its 10 dBm drive is the lowest in the family, and its window is the narrowest, so it fits a channelised product rather than a band product.

For a replacement study the drive level is the field that catches people out, because a 4 W stage from another vendor may need 20 dBm and this one needs 10. Our amplifier cross reference page puts the drive column next to the gain column for that reason.

Questions buyers ask about HXNM40006

Is it a drop in replacement for the standard 4 W part on this band. No. The standard family member at 36 dBm carries 12 to 14 dB of gain and needs 22 to 24 dBm of drive. This part needs 10 dBm, so a chain built for the standard part will overdrive it by more than 10 dB.

What is the flatness across 500 MHz. Not published. The index prints a slash in that column, so the variation has to be measured on the first article rather than read from the table.

Can it be used at 4.4 GHz. Not within the published window. The stated range starts at 4.5 GHz, and HXNM40007 is the member that covers 4.4 GHz.

How is it ordered. With no addendum and no packing column, the order names the band, the rail and the quantity. The part is held with the rest of the family through the RF component sourcing route, and a build that needs several members can be consolidated into one shipment.