Contact Us

HXN50165

Brand: Hisiwell
Hisiwell HXN50165 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN50165 — Discrete & Power Semiconductors | Superb Automation

HXN50165

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN50165 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN50165: 250 W at 7.5 dB of gain, which is 44 W of drive before the antenna sees anything

The HXN50165 is an internally matched gallium nitride HEMT on the 50 V shelf covering 2.7 to 3.5 GHz with a 250 W row, 7.5 dB of gain and 53 per cent efficiency in pulse mode. It is the S band member of the shelf, and the gain is the number that separates it from everything else in this batch: 7.5 dB means the driver has to deliver 44.46 W to get 250 W out, which is a second amplifier rather than a driver stage.

The page adds one useful condition. It calls the part a 250 W internally matched device for pulsed applications from 2700 to 3500 MHz and states that in a narrower band such as 2700 to 2900 MHz it can be a 300 W transistor. That is a 0.79 dB gain for a 200 MHz window, and it is the kind of statement that should be a line in a quotation rather than a sentence in prose.

The rest of the page is thin: no gain and efficiency block beyond the row, no package drawing, no pulse condition, no thermal resistance. On a part with this much drive requirement and this much heat, those are the three numbers a system needs first.

The HXN50165 rows as the vendor publishes them

Part classGallium nitride HEMT, internally matched, pulsed
Frequency range, index row2.7 to 3.5 GHz
Window width, calculated800 MHz
Band ratio, calculated1.3 to 1
Saturation output, index row250 W, 53.98 dBm
Output in a 2700 to 2900 MHz window, product page300 W, 54.77 dBm
Gain from narrowing the window, calculated0.79 dB for 200 MHz
Output per megahertz of the 800 MHz window, calculated0.31 W
Gain, index row7.5 dB
Drive level at 7.5 dB, calculated44.46 W, 46.48 dBm
Drain efficiency, index row53 per cent
DC input at 53 per cent, calculated at continuous duty471.7 W
Drain current at 50 V, calculated at continuous duty9.43 A
Heat at continuous duty, calculated221.7 W
Drain rail, index row50 V
Load voltage at 250 W into 50 ohm, calculated111.8 V rms, 158.1 V peak
Peak against the rail, calculated3.16 times
Peak at a 2 to 1 mismatch, calculated316.2 V
Mode, index rowPulse
Mode, product pagePulsed amplifier applications
Pulse width and duty cycleNot published
Matching, product pageInternally matched
Matching, index shelfListed on the unmatched GaN table
Package, flange and bodyNot published
Thermal resistanceNot published
Load impedance and load pullNot published
Data sheetNo document linked from the page
Orderable addendumNone published
Packing quantity and moisture levelNot published
Applications listedWireless infrastructure, wideband amplifier, EMC testing, ISM

Why 7.5 dB changes the architecture and not just the drive figure

At 7.5 dB of gain, 250 W needs 44.46 W of drive, which is 46.48 dBm. Very few signal sources reach 46 dBm, so the amplifier becomes a two stage build: a small signal stage, a driver at around 50 W, and then this part. That is one more flange, one more bias supply and one more heat source than a 16 dB part would need, and it is the reason a low gain final is chosen only when the band and the power leave no alternative.

The comparison inside this batch makes the point. The HXN50160F at 800 W needs 20.1 W of drive at 16 dB of gain. The HXN50162x2 at 1500 W needs 37.68 W at 16 dB. Neither is far from the 44.46 W this part needs for a quarter of the output, so the HXN50165 is the most drive hungry row per watt in the batch by a wide margin.

Gain that low on a pulse part usually comes with a wide intrinsic band and a simple internal match, which is why the part exists at all. Where the system is a radar block with a 50 W driver already in the chain, the 7.5 dB is not a cost, it is the interface that matches the driver that was already chosen.

The narrow band 300 W claim and the condition behind it

The page says that in a narrower band such as 2700 to 2900 MHz the part can be a 300 W transistor. 300 W against 250 W is 0.79 dB, and the window falls from 800 MHz to 200 MHz, a fourth of the band. Neither the condition nor the test is stated: no pulse width, no duty, no rail tolerance, no efficiency at the higher power.

0.79 dB is small enough that a buyer may be tempted to plan at 300 W across the whole window. That would be a mistake. The claim is explicitly tied to a narrow band, and on a GaN part the difference between a 200 MHz and an 800 MHz match is real: the wider network has more loss at the band edges and presents a load that is further from the optimum.

Where the application really is 2700 to 2900 MHz, the 300 W figure is worth pursuing and the factory should be asked to confirm it at the system pulse condition. Where the application needs 2.7 to 3.5 GHz, treat 250 W as the number and size the thermal path on that.

Where the HXN50165 sits on the shelf

The 50 V shelf around it is mostly lower in frequency. The nearest rows in band are the 48 V wideband parts, which cover 2 to 4 GHz at 185 W and 370 W with 18 dB of gain and 70 per cent efficiency. Both are 10 dB above this part in gain and both are far easier to drive, but neither publishes a 2.7 to 3.5 GHz specific rating, and at 3.5 GHz a wideband 2 to 4 GHz part is working at its edge.

On power per megahertz of window the HXN50165 is dense, 0.31 W per MHz against 0.18 for the 370 W wideband row, which is what a narrow band part should look like. The trade is the drive and the gain, not the power. Where the band is fixed between 2.7 and 3.5 GHz and the driver is already a 50 W stage, this row is the shortest path to 250 W. The drive figure for each row is on the RF power transistor cross reference page.

What an order for the HXN50165 has to state, and what it cannot yet

No pulse width, duty, thermal resistance, package drawing, load pull or data sheet is published, and there is no orderable addendum, packing column or moisture level. The purchase order has to carry the part number, the window (whole band or the 200 MHz narrow band), the rail, the pulse width and duty, the drive available, the quantity and the incoming test. The drive is worth naming because it decides whether the part is usable at all in the proposed chain.

The incoming gate should measure gain at the pulse condition, not at DC, because on a 7.5 dB part a 1 dB gain shortfall is a 12 per cent drive increase and the driver may not have it. The incoming inspection plan page sets out the record, and where the radar block also needs its driver, its circulator and its passives against one date, the one stop RF supply page covers the consolidated buy.

Questions buyers ask about the HXN50165

Is the gain really 7.5 dB? That is the row, and it is the lowest in the batch. It means 44.46 W of drive for 250 W, so plan a driver stage rather than a source.

Is it 250 W or 300 W? 250 W across the 2.7 to 3.5 GHz window, 300 W only in a narrow band such as 2700 to 2900 MHz, and that claim has no published condition.

Is the input matched? The page says internally matched and the shelf says unmatched, the same unresolved pair as the rest of this table. Ask before the first board.

What is the heat load? 221.7 W at continuous duty from 53 per cent efficiency. A pulsed system with a 10 per cent duty sees about a tenth of that on average, and the report should state which case it is quoting.