Contact Us

HXN42012

Brand: Hisiwell
Hisiwell HXN42012 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN42012 — Discrete & Power Semiconductors | Superb Automation

HXN42012

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN42012 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN42012: 562 W over 2.7 to 3.5 GHz at 13.5 dB of gain

The HXN42012 is the part in this group that combines a wide band with a high output and a gain figure that a chain can live with. It prints 57.5 dBm typical output, 13.5 dB typical power gain, 55 per cent typical power added efficiency, a 48 V rail, 0.8 dB of flatness, 200 microsecond pulses at 10 per cent duty and a metal package, across 2.7 to 3.5 GHz.

Fifty seven and a half dBm is 562.3 W. At 55 per cent efficiency the DC input is 1022 W, the drain current at 48 V is 21.3 A, and the dissipation during the pulse is 460.1 W. With 13.5 dB of gain the drive needed is 44 dBm, or 25.1 W, which is the same drive as the 316 W part with 11 dB of gain and 16.6 W less drive than the 631 W part.

That combination is the reason this part is often the practical choice at the top of a chain: 562 W for 25.1 W of drive, over an 800 MHz band, from a 48 V rail. The efficiency figure of 55 per cent typical is also the second highest in the group, which at this output level is worth 70 W of dissipation against a 50 per cent part.

The pulse is 200 microseconds at 10 per cent duty, so a 2 ms period with the device on for a fifth of a millisecond. That is longer than the 100 microsecond members and shorter than the 1 ms parts, and the pulse width is the one number that has to match between the vendor's characterisation and the system's waveform.

The parameter rows Hisiwell publishes for HXN42012

Part classGallium nitride power transistor, internally matched, metal package
Frequency range2.7 to 3.5 GHz
Output power as published57.5 dBm typical
Output power in watts, calculated562.3 W
Power gain as published13.5 dB typical
Power added efficiency as published55 per cent typical
Drain voltage48 V
Flatness across the band0.8 dB
Operating modepulsed, 200 microsecond pulse width at 10 per cent duty
Input and output impedance50 ohm
DC input at rated output, calculated1022.4 W
Drain current at saturation, calculated21.30 A at 48 V
Dissipation during the pulse, calculated460.1 W
Average dissipation at 10 per cent duty, calculated46.0 W
Average drain current at 10 per cent duty, calculated2.13 A
Drive power for the rated output, calculated44 dBm, 25.1 W
Charge drawn per pulse, calculated4.26 mC
Dissipation if efficiency falls to 48 per cent, calculated609.2 W
Output per 100 MHz of the band, calculated70.3 W
Thermal resistance, junction to casenot published
Transient thermal impedancenot published
Package outline and dimensionsmetal package, drawing as an image only
Scattering parametersnot published
Pinch off voltage and gate bias pointnot published on this page
Operating and storage temperaturenot published
Moisture level and floor lifenot published
Orderable addendum and packingnot published
Same band, 50 V, 55 dBm, 20 per cent dutyHXN40036 at 11 dB gain
Wider band, 48 V, 58 dBm, 11.8 dB gainHXN42001 over 2.7 to 3.4 GHz

Thirteen and a half decibels at 562 W

Gain is the row that decides the size of everything in front of the final stage, and at 13.5 dB this part needs 25.1 W of drive for 562 W of output. Compare the three neighbours on nearly the same band: 11 dB of gain means 25.1 W for 316 W, 11.8 dB means 41.7 W for 631 W, and 13.5 dB means 25.1 W for 562 W. The last of those is the cheapest drive per watt of output in the group, which is why this part is attractive when the driver is already fixed by an earlier product.

Gain also has to hold across 800 MHz. The 0.8 dB flatness row is stated for output power at saturation, and a gain slope across the band will add to it in a chain where the driver is levelled. A system that needs a levelled output should plan the equaliser at the front end, where the level is low and the loss is cheap, rather than after the driver.

The input match is not published at a backed off drive, so the driver sees an unknown load across the band. An isolator at 25 W of drive costs 3 W and protects the driver, and at this power level that is a cheap insurance against a load pull that varies with frequency.

Four hundred and sixty watts of pulse heat at 200 microseconds

At 10 per cent duty the average dissipation is 46.0 W and the average drain current 2.13 A, which is a modest steady state load. The pulse figure is 460.1 W for 200 microseconds, twice the length of the 100 microsecond members, and pulse length is what decides whether the die heats within the pulse or holds its temperature. Without a transient thermal impedance curve, the only way to answer it is measurement on the first article.

The supply side needs 1022 W of DC for the pulse and 4.26 mC of charge per pulse, so a bank allowed to sag 2 V needs 2.1 mF and one allowed 1 V needs 4.3 mF, with the ESR inside the loop and the feed inductance setting the edge. Twenty one amperes through a metal flange is a current path that has to be planned as part of the assembly, not added afterwards.

Efficiency sensitivity is worth stating because 55 per cent is a typical: at 48 per cent the dissipation rises to 609.2 W and the current to 24.4 A, at 58 per cent it falls to 407.2 W and 20.2 A. A part at the low end of the spread needs a third more cooling than the typical one.

Where a 562 W stage over 2.7 to 3.5 GHz fits

The fit is a transmitter that needs several hundred watts over a wide S band window with a driver it already has: a radar front end, a test amplifier for antenna and radome work, an electronic countermeasure source, or a multi band satellite uplink. The 48 V rail and the 25.1 W of drive make it easy to slot behind an existing driver module.

It is a poor fit for a 1 ms pulse system, because the published condition is 200 microseconds, and a poor fit for continuous wave at 562 W. It is also a poor fit for a compact assembly without a liquid or heat pipe path, since 460 W of pulse heat has to leave a metal flange.

Our RF power transistor cross reference work lists this part against the 631 W and 316 W members with drive, band and pulse condition in the same row, because the three look similar on the dBm headline and differ by 16.6 W of drive, 300 MHz of band and 100 microseconds of pulse width.

Questions we answer about HXN42012 before a lot is booked

The first is the pulse width. Two hundred microseconds at 10 per cent duty is the published condition, and a system that keys 500 microseconds at the same duty cycle is asking a different thermal question.

The second is the driver. With 13.5 dB of gain the drive is 25.1 W, and the input match at a backed off drive is not published, so an isolator and 2 dB of margin are the sensible allowance.

The third is the lot and the bias. No pinch off voltage, no moisture level and no order code are published, so the gate supply is set per lot and established before the drain, the purchase order names the band, the rail and the pulse condition, and the incoming inspection plan records the marking, the flange and the DC behaviour. A saturated power sweep at 3 GHz belongs on the customer bench or at a partner RF laboratory, and the defence grade component supply view covers the screening questions that usually accompany an S band radar requirement.