HXN42001
Product Specifications
HXN42001
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN42001 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN42001: 631 W at 2.7 to 3.4 GHz with the lowest gain in the group
The HXN42001 is the highest output part in this family's S band group. It prints 58 dBm typical output over 2.7 to 3.4 GHz, 11.8 dB typical power gain, 50 per cent typical power added efficiency, a 48 V rail, 0.8 dB of flatness, 100 microsecond pulses at 10 per cent duty and a metal package. Unlike its neighbours, its product page carries a link to a full product data sheet, and what that document contains is the most useful finding on this page.
Fifty eight dBm is 631 W, which is the largest number in the group and the one that sets the class of everything around it: 1262 W of DC input at 50 per cent efficiency, 26.3 A of drain current at 48 V, and 631 W of dissipation during the pulse. At a 10 per cent duty cycle the average dissipation is 63.1 W and the average drain current 2.63 A.
The gain row is the trade. Eleven and eight tenths of a decibel is the lowest gain printed for any part at this output level in the family, which means the drive needed is 46.2 dBm, or 41.7 W. A driver at 41.7 W is not a packaged amplifier; it is a power stage of its own, and a 58 dBm transmitter built on this part is a three stage chain with a real power amplifier in the middle.
The band is 700 MHz wide, the widest printed for a single internally matched part in this group. That width is what makes the part attractive for a multi role transmitter, and it is also what makes the 0.8 dB flatness row hard to hold, since flatness of that order across 700 MHz at this power depends on how the match was synthesised rather than on any property of the die.
The parameter rows Hisiwell publishes for HXN42001
| Part class | Gallium nitride power transistor, internally matched, metal package |
| Frequency range | 2.7 to 3.4 GHz |
| Output power as published | 58 dBm typical |
| Output power in watts, calculated | 631.0 W |
| Power gain as published | 11.8 dB typical |
| Power added efficiency as published | 50 per cent typical |
| Drain voltage | 48 V |
| Flatness across the band | 0.8 dB |
| Operating mode | pulsed, 100 microsecond pulse width at 10 per cent duty |
| Input and output impedance | 50 ohm |
| DC input at rated output, calculated | 1261.9 W |
| Drain current at saturation, calculated | 26.29 A at 48 V |
| Dissipation during the pulse, calculated | 631.0 W |
| Average dissipation at 10 per cent duty, calculated | 63.1 W |
| Average drain current at 10 per cent duty, calculated | 2.63 A |
| Drive power for the rated output, calculated | 46.2 dBm, 41.7 W |
| Dissipation if efficiency falls to 45 per cent, calculated | 771.2 W |
| Thermal resistance, junction to case | not published on either page |
| Package outline and dimensions | metal package, drawing in the linked document only as an image |
| Scattering parameters | not published |
| Pinch off voltage, from the linked document | minus 1.5 V minimum to minus 3.5 V maximum, minus 2.8 V typical |
| Gate to source rating, from the linked document | minus 5 V |
| Channel temperature ceiling, from the linked document | 225 C |
| Recommended case temperature, from the linked document | not above 75 C |
| Terminal arrangement, from the linked document | 1 gate, 2 drain, 3 source |
| Storage range, from the linked document | minus 65 to plus 175 C |
| Moisture level and floor life | not published |
| Orderable addendum and packing | not published |
The data sheet behind the link belongs to another part string
The product page for this part carries a link labelled product data sheet. The document that opens is headed HX2734P600W and describes a 2.7 to 3.4 GHz gallium nitride internally matched power transistor with 58 dBm typical output at 48 V, 11.8 dB typical gain and 50 per cent typical power added efficiency. The electrical content matches this part closely, but the part string on the cover is not HXN42001.
That mismatch is worth stating plainly because it is the sort of thing that turns into a drawing error later. Either the vendor renamed the product and has not relabelled the document, or the document describes a sibling part with identical headline figures, and only the vendor can say which. A purchase order written against HXN42001 with this document attached is an order with two part strings in it, and the receiving inspection will not resolve the difference.
The document also disagrees with the index table on the pulse condition: it specifies 1 ms at 10 per cent duty, while the index says 100 microseconds at 10 per cent. The dissipation arithmetic for 1 ms is ten times the energy per pulse, and the transient thermal answer is entirely different, so this is not a formatting detail. A buyer should ask for the pulse condition in writing on the order, and should treat the shorter figure as the condition under which the part was characterised for the catalogue.
What the document does add is real data that no other page in this family has: a pinch off window of minus 1.5 V to minus 3.5 V with a minus 2.8 V typical, measured at 3 V drain and 100 mA; a gate to source ceiling of minus 5 V; a channel temperature ceiling of 225 C; a recommendation to hold the case at or below 75 C; a terminal arrangement of gate, drain and source on terminals one, two and three; a storage range from minus 65 to plus 175 C; and notes that the device is electrostatic sensitive, radiation insensitive, and must have the gate supply applied before the drain.
Twenty six amperes and six hundred watts of pulse heat
The supply side of this part is the hardest in the group. Twenty six amperes at 48 V for 100 microseconds, 1262 W of DC input, and a charge of 2.63 mC per pulse: a bank allowed to sag 2 V needs 1.3 mF, and 1 V of sag needs 2.6 mF, all of it close to the flange with short, wide returns. The inductance of the feed, not its resistance, is what limits the leading edge at these currents.
The thermal side is harder still. Six hundred and thirty one watts of instantaneous dissipation through a flange whose thermal resistance is not published, held under a 75 C case recommendation, is a build that has to be measured rather than calculated. The one number that can be computed is the average: 63.1 W on a carrier of 0.5 C per watt is 32 C of average rise over the case, which is manageable; the excursion inside the pulse is the unknown.
Efficiency sensitivity is larger here in absolute terms than anywhere else in the group: at 45 per cent the dissipation rises to 771 W and the current to 29.2 A, at 55 per cent it falls to 516 W and 23.9 A. A part at the low end of the spread needs 20 per cent more cooling and 11 per cent more current than the typical one, on the same order code.
Where a 631 W stage over 2.7 to 3.4 GHz fits
The fit is a high power wideband transmitter whose pulse budget is short and whose cooling is engineered: an S band surveillance or instrumentation radar, a high power test amplifier for radome and antenna measurements, or a multi role transmitter that has to cover 2.7 to 3.4 GHz without changing hardware. The 700 MHz band is the reason to choose it over the narrower members.
It is a poor fit where the driver budget cannot reach 41.7 W, which rules out a two stage chain ending in this part. It is a poor fit for continuous wave, and a poor fit for a compact assembly without a liquid or heat pipe path, because 631 W of pulse dissipation will not leave a metal flange at a sane temperature without one.
Our RF power transistor cross reference work keeps the drive requirement next to the output for every part in this group, because at 58 dBm the drive is 41.7 W and at 57.5 dBm with 13.5 dB of gain it is 25.1 W, and that 16 W gap is a whole driver stage in the bill of materials.
Questions we answer about HXN42001 before a lot is booked
The first is the part string. Ask the vendor to confirm in writing whether the HX2734P600W document is the data sheet for HXN42001, and to issue a document carrying the ordered string if it is not. Our supplier quality audit view treats a document that does not match the order as a finding rather than a formality.
The second is the pulse condition, 100 microseconds or 1 ms, because the cooling and the bank both change with it.
The third is the bias. With a pinch off window of minus 1.5 to minus 3.5 V and a minus 5 V ceiling, the gate supply has to be set per lot and established before the drain, and the incoming inspection plan records the gate to source leakage at minus 5 V, the pinch off voltage and the marking. A saturated power sweep at 3 GHz belongs on the customer bench or at a partner RF laboratory, and the quotation should say so.