Contact Us

HXCM40006

Brand: Hisiwell
Hisiwell HXCM40006 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXCM40006 — Discrete & Power Semiconductors | Superb Automation

HXCM40006

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXCM40006 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXCM40006: two and a half watts across the whole 8.5 to 11 GHz span with 23.5 dB of gain

The HXCM40006 is the second member of the Hisiwell gallium arsenide high gain internally matched family, and it is the widest part in this catalogue. Its window runs from 8.5 to 11 GHz, which is 2.5 GHz and 25.64 per cent fractional at a 9.75 GHz centre, and it covers both of the X band windows that the conventional family splits into two groups. The index row reads saturation output at least 34 dBm, compression column empty, gain at least 23.5 dB, drain efficiency at least 40 per cent, 8 V drain rail, flatness not published, continuous wave.

34 dBm is 2.51 W and 23.5 dB of gain puts the drive at 10.5 dBm, which is 11.2 mW. At 40 per cent the DC input is 6.28 W, the drain current at 8 V is 0.785 A and the heat is 3.77 W, the lowest of any part in this batch. A part that covers 2.5 GHz of X band, needs eleven milliwatts of drive and dissipates under four watts is a very different proposition from the twenty five watt members on the narrow windows.

The efficiency of 40 per cent is the highest published figure in the gallium arsenide groups described on this page, and it is stated at saturation on an 8 V rail. The flatness column is empty, so the gain variation across the 2.5 GHz span is not published and has to be measured.

The parameter rows Hisiwell publishes for HXCM40006

Part classGallium arsenide high gain internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range8.5 to 11 GHz
Bandwidth, calculated2500 MHz, 25.64 per cent fractional at a 9.75 GHz centre
Saturation output power as publishedat least 34 dBm
Saturation output power in watts, calculated2.51 W
Output at 1 dB compression as publishednot published, the index prints a slash in that column
Gain as publishedat least 23.5 dB
Drain efficiency as publishedat least 40 per cent
Drain voltage8 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandnot published, the index prints a slash in that column
Operating modecontinuous wave
Drive power for the saturation point, calculated10.5 dBm, 11.2 mW
DC input at saturation, calculated6.28 W
Drain current at saturation, calculated0.785 A at 8 V
Dissipation at saturation, calculated3.77 W
Dissipation if efficiency reaches 50 per cent, calculated2.51 W
Output per 100 MHz of the band, calculated0.10 W
Load voltage at saturation into 50 ohm, calculated11.20 V RMS, 15.84 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Narrow window member at 36 dBmHXC40035, 8.5 to 9.6 GHz, 8 dB gain, 35 per cent
Other member of the high gain familyHXCM40005, 5.8 to 6.7 GHz, 26 dB gain, 35 dBm at saturation

Two and a half gigahertz from one package

A conventional internally matched part covers about a gigahertz. This one covers 2.5 GHz, from 8.5 to 11 GHz, which spans both of the X band windows that the conventional family splits into two groups. For a system that has to work anywhere in low and middle X band, that is the whole argument: one part, one bias, one footprint, and no switch between two narrower devices.

The cost of the span is output. 2.51 W against 3.98 W for the narrow 36 dBm member, and 12.59 W for the 41 dBm member. The output per 100 MHz of the band is 0.10 W, against 0.36 W for the narrow part, which is the cleanest way to see what broadband matching costs in power density.

What the span buys is inventory and qualification. A programme that builds three variants of a unit on three sub bands can hold one part instead of three, and can qualify a single line up instead of three. On a small production run that is usually worth more than four decibels of output.

Eleven milliwatts of drive and under four watts of heat

This is the easiest part in the batch to integrate. Eleven milliwatts at 10.5 dBm is within the output of a small packaged gain block or a mixer with a modest bias. The 3.77 W of heat is a base plate and a few square centimetres of copper. The 8 V rail at 0.785 A is a small buck or a linear regulator with 3.1 W of drop from 12 V.

What is not easy is the flatness. The vendor prints a slash in that column, so the gain variation across the 2.5 GHz is unpublished. A broadband part with 23.5 dB of gain can vary by several decibels end to end, and a system that expects a flat response has to either equalise it or close a level loop. Both are normal; neither can be planned from the index row.

With 40 per cent at saturation the DC budget is comfortable, and at 2.51 W output the load voltage into 50 ohm is 11.20 V RMS, well below the 8 V rail argument that limits the narrower parts. This is a part that behaves like a gain block with a power output, rather than like a power transistor that needs a driver.

Wide X band coverage in a receiver front end and a small transmitter

Because the part is a power device, it is not a low noise amplifier and it should not be used as one. Its role is the final stage of a small transmitter, or the driver for a larger one, across a band where a single unit has to tune anywhere from 8.5 to 11 GHz.

That covers test equipment, electronic countermeasure front ends, wideband data links and the calibration sources used to check radar receivers across X band. In each case the requirement is coverage rather than power, and 2.51 W at saturation with 23.5 dB of gain meets it with one package.

Where the requirement is power on a narrow window, the conventional family is the better buy and the narrow member at 36 dBm gives more than three watts with less gain. The two families exist because those two requirements are different, and mixing them up is the most common mistake in a line up of this shape.

The ladder inside the high gain family

Two members, two bands, one question. This part gives 2.51 W, 23.5 dB and 40 per cent on 8.5 to 11 GHz at 8 V. The other gives 3.16 W, 26 dB and 30 per cent on 5.8 to 6.7 GHz at 8 V. Neither is a step above the other; they are the same answer on different windows, and the band decides.

Against the conventional family the trade is uniform: less output, far more gain, less rail voltage and a much wider window. The gain difference of 13.5 dB against the narrow 36 dBm member is the reason a high gain part exists at all, and it is worth more than the 1.47 W of output it gives up in most small transmitters.

The RF power transistor cross reference puts the high gain family beside the conventional one on the same table, and the RF component sourcing page lists the questions we ask before quoting a wideband line up.

Questions buyers ask before ordering HXCM40006

Does it really cover 8.5 to 11 GHz in one part? The vendor states that range with 50 ohm at both ports. The flatness across it is not published, so coverage is stated and gain flatness is not.

Is 34 dBm a compression point? No, it is saturation. The compression column carries a slash and no linear output figure is published.

Can it be used as a driver for a larger X band part? Yes, and 2.51 W at saturation is a sensible drive level for a 44 dBm final. The level has to be backed off so the driver stays linear, which costs a decibel or two of the 2.51 W.

How do we start? Send the band edges, the output you need, the drive available and the rail. We will confirm whether the high gain family or the conventional one fits, quote from the current factory schedule, and ship a sample with the factory test data at the band edges and centre.