HXC50176
Product Specifications
HXC50176
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50176 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50176: a 150 W pair on 28 V at 500 MHz with 18 dB and 65 per cent published
The HXC50176 is an LDMOS RF power transistor from Hisiwell on the HF table with a 0.5 GHz top frequency, a 150 times two output row and the two figures most rows on that table leave blank: 18 dB of gain and 65 per cent drain efficiency. It runs on a 28 V rail in CW.
For a buyer, the published gain and efficiency are worth more than the power figure. They close two budgets that otherwise have to wait for a factory answer: the drive level for the stage in front, and the heat load for the heatsink behind. On this row 300 W at 18 dB needs 4.75 W of drive, and 300 W at 65 per cent draws 462 W from the rail with 162 W of heat.
The rail is the other half of the story. 28 V is the vehicle and mobile standard, and it is also the rail of a large part of the legacy land mobile and military VHF and UHF equipment. A buyer with a 28 V bus and a 500 MHz requirement has few rows to choose from on this table, and this is one of them.
The HXC50176 rows as the vendor publishes them
| Part class | LDMOS RF power transistor, push pull pair |
| Frequency range, index row | HF to 0.5 GHz |
| Top frequency in MHz, calculated | 500 MHz |
| Quarter wavelength at the top, calculated | 150 mm in air |
| Saturated output, index row | 150 W times two |
| Pair total, calculated | 300 W, 54.77 dBm |
| Per side, calculated | 150 W, 51.76 dBm |
| Gain, index row | 18 dB |
| Drive for 300 W at 18 dB, calculated | 4.75 W, 36.77 dBm |
| Drain efficiency, index row | 65 per cent |
| DC input at 65 per cent, calculated | 462 W, 16.5 A at 28 V |
| Heat to remove, calculated | 162 W |
| Drain rail, index row | 28 V |
| Load voltage at 300 W into 50 ohm, calculated | 122.5 V rms, 173.2 V peak |
| Peak against the rail, calculated | 6.19 times |
| Load voltage per side at 150 W, calculated | 86.6 V rms, 122.5 V peak, 4.37 times the rail |
| Peak at a two to one mismatch, calculated | 346.4 V |
| Load line resistance for 300 W on a 28 V rail, calculated | 1.3 ohm at the fundamental |
| Mode, index row | CW |
| Package and flange | Not published |
| Thermal resistance, junction to case | Not published |
| Pulse width and duty cycle | Not published, CW stated on the row |
| Load impedance | Not published, no load pull table |
| Data sheet | None reachable for this row |
300 W from 28 V: the current, the ratio and the network
300 W into 50 ohm is 122.5 V rms and 173.2 V peak, which is 6.19 times a 28 V rail. Compare that with a 50 V row at the same power, where the load peak is 3.46 times the rail: on 28 V the transistor has to swing nearly twice as far above its supply, and the network has to transform a load line near 1.3 ohm up to 50 ohm, which is a ratio of about 38 to 1.
That ratio is the practical difficulty of every 28 V part at this power level. A 38 to 1 transformation at 500 MHz cannot be done in one section, so the output network is at least two sections and probably three, and each section adds loss. A well built network at this ratio holds the loss to about 0.4 dB, which at 300 W is 29 W of heat in the network itself, on top of the 162 W in the devices.
The current is the other consequence: 16.5 A from a 28 V bus at 65 per cent efficiency. That is a substantial current for a mobile installation, and the feed from the battery or the converter has to be sized for it with the envelope peaks in mind rather than for the average. A 28 V bus that sags by 2 V under load loses 0.3 dB of output before anything else happens.
Why 18 dB and 65 per cent make this part easy to place in a chain
An 18 dB part needs 4.75 W of drive for full output, which is a single stage in most systems and sometimes the output of a driver amplifier already in the system. That is the practical difference between this row and the rows with no published gain: the buyer can size the driver on the first day rather than after a factory answer.
A 65 per cent drain efficiency means 462 W from the rail for 300 W of output. On a 28 V system that is 16.5 A, which sets the fuse, the wiring and the alternator or converter rating. Efficiency also decides the heatsink: 162 W needs a forced air heatsink in a compact product, and a 5 per cent error in efficiency moves that by 25 W, which is the difference between one heatsink size and the next.
Both figures on this row are class figures. The vendor does not say at what frequency, what drive level or what temperature they were measured, so they should be treated as nominal at the centre of the window and verified at the band edges. That is normal for a table of this kind, and it is why an incoming test measures rather than trusts.
What a 28 V, 300 W stage is used for
The natural homes are land mobile base stations, military VHF and UHF equipment, vehicle mounted jammers and countermeasures, and industrial RF sources that run from a 24 V or 28 V bus. In all of those the 28 V rail is already there, so the part avoids a boost converter, which is worth several points of system efficiency.
In a military or public safety product the requirement that usually matters more than output is ruggedness under mismatch, and this row publishes nothing about it. A 28 V part at 300 W faced with an open circuit can see 346 V peak at the flange, and whether it survives is a property of the die and the bias network rather than of the row. Ask the factory, and put a circulator in front of the antenna if the answer is not in writing.
In a vehicle installation the second requirement is behaviour on a supply that moves. A 28 V bus in a vehicle is nominal, and the real range is wider, so the part needs a bias scheme that holds the quiescent current across that range. The vendor publishes no bias point and no temperature behaviour, so that part of the work belongs to the amplifier builder.
Where the HXC50176 sits among the 28 V rows
The 28 V rows on this table are smaller than the 50 V rows at the same frequency: a 115 W pair and a 70 W pair at 500 MHz, then this 150 W pair, and single ended parts at 40 and 25 W. Read together, the 28 V group offers between 25 W and 300 W in the 500 MHz band, which covers the mobile and portable market rather than the transmitter market.
Against the 50 V 350 W pair on the same band, this row gives away 0.67 dB of output and needs 6.19 times the rail swing instead of 3.74. What it gains is the 28 V bus, and on a vehicle that gain is worth more than two thirds of a decibel. The comparison across rails and powers is on the RF power transistor cross reference page.
Against the 12.5 V pair at 100 W on the same band, this row is 4.77 dB higher in output and runs from a rail that is easier to feed at 16.5 A than 12.5 V is at 10.4 A for a quarter of the power. The two rows address different products rather than different points on one ladder.
Buying the HXC50176: what the order has to state
State the sub band inside HF to 500 MHz, the rail tolerance, the mode, the flange and body, the quantity, and whether the 18 dB and 65 per cent are to be guaranteed at a stated frequency and temperature. On a part that publishes both figures, the question is not whether they exist but at what condition they hold.
The incoming test should record gain, output and drain current at the rated drive, plus the quiescent current at the bias the amplifier will use. With gain and efficiency published, a unit that misses either by more than a decibel is visible immediately, which makes this row easier to police than the rows with blank cells. The record format is on the incoming inspection plan page.
For a vehicle or base station product the devices are bought with the circulator, the driver and the passives, so consolidating the chain against one date is the practical route described on the one stop RF supply page.
Questions buyers ask about the HXC50176
Is 300 W from one device? It is 150 W times two, so 300 W is the pair total at 54.77 dBm.
How much drive? 18 dB of gain puts the drive at 4.75 W, which is 36.77 dBm. That is the figure the row supports.
What current does it draw? 16.5 A at 28 V and 65 per cent efficiency, which is 462 W of DC input for 300 W of output.
Can it run from a 24 V bus? The row says 28 V. Running below the stated rail changes the load line and the output, so it needs a factory answer rather than an assumption.
Is it rugged into a mismatch? Not published. At 346 V peak under a two to one mismatch, protection belongs in the product unless the factory states otherwise.