HXC40021
Product Specifications
HXC40021
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40021 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40021: twelve and a half watts on 5.3 to 5.9 GHz at thirty eight per cent
The HXC40021 is the third member of the gallium arsenide internally matched family on the 5.3 to 5.9 GHz window. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 5.3 to 5.9 GHz, saturation output not printed, output at 1 dB compression at least 41 dBm, gain at least 10 dB, drain efficiency at least 38 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
41 dBm is 12.59 W. The three published figures together make this the efficiency sweet spot of the band: 38 per cent is two points above the 45 dBm member and only two points below the small 36 dBm part, while the output is three times that of the small part. On 10 V the current is 3.31 A, which a single phase converter can still serve with care.
Twelve watts on this band covers the fixed wireless operators, the upper 5 GHz wireless access channels and a number of short range radar and data link products. It is also the natural driver for a 45 dBm stage when a transmitter needs a two stage line up rather than a three stage one.
The parameter rows Hisiwell publishes for HXC40021
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 5.3 to 5.9 GHz |
| Bandwidth, calculated | 600 MHz, 10.71 per cent fractional at a 5.6 GHz centre |
| Output at 1 dB compression as published | at least 41 dBm |
| Output at 1 dB compression in watts, calculated | 12.59 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 10 dB |
| Drain efficiency as published | at least 38 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 31 dBm, 1.26 W |
| DC input at compression, calculated | 33.13 W |
| Drain current at compression, calculated | 3.31 A at 10 V |
| Dissipation at compression, calculated | 20.54 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 12.59 W |
| Output per 100 MHz of the band, calculated | 2.10 W |
| Load voltage at compression into 50 ohm, calculated | 25.09 V RMS, 35.48 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the same band at 39 dBm | HXC40020, 35 per cent efficiency |
| Neighbour on the same band at 45 dBm | HXC40022, 35 per cent efficiency |
Where the efficiency curve turns
The 36 dBm part on this band quotes 40 per cent, this one 38, the 39 dBm part 35 and the 45 dBm part 35. The curve is not monotonic because the 39 dBm member sits on a different die than either of its neighbours, and a buyer comparing the four rows should not read the efficiency column as a smooth function of output. It is a measured figure per part at compression, and on 10 V the spread between 35 and 40 per cent across the family is about as large as the process allows.
What the 38 per cent buys in practice is 20.54 W of heat instead of 23.4 W for the same output at 35 per cent. On a 1 C per watt carrier that is a 20 C case rise, and on the carrier sizes used in a 12 W transmitter it is the difference between a plate with fins and a plate without them.
3.31 A at 10 V is also the point where the drain feed starts to need attention. A 100 mm long track at 2 mm wide on 1 oz copper has about 0.5 nH of inductance and a few milliohms of resistance, which is tolerable at this current but not at the 9 A of the 45 dBm member. The feed for this part can be a track; the feed for the next member up should be planned as a bar.
The drive is 1.26 W, or 31 dBm. That is above the output of most packaged gain blocks, so the driver is a small power transistor rather than a MMIC amplifier. On a two stage line up that driver is the 36 dBm member of this family, backed off five decibels, which keeps the parts on one rail and one family.
Twelve watts on 5.3 to 5.9 GHz
At this output the part serves fixed wireless access terminals, upper band wireless access equipment, short range radar and data links, and laboratory and test sources where a 12 W signal has to be swept across 600 MHz. In every one of those the antenna is a real load with a return loss that moves with frequency, and the internally matched output is what keeps the amplifier from following the antenna.
For a fixed wireless terminal the modulation is usually shaped and the operating point is backed off. At 6 dB back off the output is 3.1 W and the efficiency is in the low twenties, so the heat is set by the DC input rather than by the radio frequency output. A buyer who budgets the heatsink from the 20.54 W at compression will be close, because the DC input falls only slowly as the drive is reduced on a class AB stage.
For a radar or a test source the signal is pulsed or continuous wave with a constant envelope, and the published row applies. In pulsed service the duty cycle reduces the average heat, and the peak figures stay as published. The part is specified continuous wave, so a pulsed application has margin on the thermal side rather than a shortfall.
Two decibels either side
The HXC40020 at 39 dBm and 35 per cent is the smaller neighbour, and the HXC40022 at 45 dBm and 35 per cent is the larger. Between 41 and 45 dBm the current more than doubles, from 3.31 to 9.04 A, and the heat nearly triples, from 20.54 to 58.73 W. That is the step at which a transmitter stops being a board with a heatsink and becomes a chassis with a cold plate.
Between 39 and 41 dBm the change is modest: 1.58 times the output, three points of efficiency gained and the drive up from 0.79 to 1.26 W. In a new product the 41 dBm part is usually the safer choice because it can run at 39 dBm with two decibels of margin and still be inside the thermal budget of a 12 W transmitter. Our RF power transistor cross reference lists the four rows side by side for that comparison.
Our one stop RF supply page describes how we quote the device, the carrier and the interface together when a customer wants the amplifier as a mounted assembly rather than as a loose part.
Questions buyers ask before ordering HXC40021
Is the band centred where the flatness is quoted? The window is 5.3 to 5.9 GHz and the match is centred at 5.6 GHz, so the flatness is measured across the whole window rather than around one channel.
Does the part need a circulator? At 12.59 W a 2 to 1 mismatch reflects about 1.4 W back into the die. On a continuous wave product with no published mismatch tolerance, a circulator and a load are standard practice.
Is 38 per cent available at 5.3 GHz? The figure is the vendor minimum for the band at compression. Expect it at the centre and slightly less at the edges, where the match is weaker.
How do we start? Send the output, the band edges, the modulation and the ambient. We will confirm the member of the family, quote from the current schedule and ship a sample with output, gain and efficiency measured at three frequencies across the window.