HXC40014
Product Specifications
HXC40014
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40014 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40014: thirty one watts at compression, the top of the 4.4 to 5.0 GHz ladder
The HXC40014 is the largest member of the gallium arsenide internally matched family on the 4.4 to 5.0 GHz window. The vendor states in-plane matching synthesis and thin film hybrid integration with 50 ohm at both ports. The index row reads 4.4 to 5 GHz, saturation output not printed, output at 1 dB compression at least 45 dBm, gain at least 10 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
45 dBm at compression is 31.62 W, four times the output of the HXC40012 on the same band and rail. The current follows: 9.04 A at 10 V. At that point the transistor is no longer the hard part of the transmitter. The supply, the heat path and the connectors are, and a project that starts from the device without planning those three will find the schedule slipping at the integration stage rather than at the radio frequency stage.
The efficiency is 35 per cent, which is the same figure as the smallest part on the band and lower than the 38 per cent of the HXC40013. That is normal for a larger die in the same process: the matching loss and the thermal spread across a wider periphery cost a few points. The 58.73 W of heat at compression is the number that decides the mechanical envelope.
The parameter rows Hisiwell publishes for HXC40014
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 4.4 to 5.0 GHz |
| Bandwidth, calculated | 600 MHz, 12.77 per cent fractional at a 4.7 GHz centre |
| Output at 1 dB compression as published | at least 45 dBm |
| Output at 1 dB compression in watts, calculated | 31.62 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 10 dB |
| Drain efficiency as published | at least 35 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 35 dBm, 3.16 W |
| DC input at compression, calculated | 90.35 W |
| Drain current at compression, calculated | 9.04 A at 10 V |
| Dissipation at compression, calculated | 58.73 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 31.62 W |
| Output per 100 MHz of the band, calculated | 5.27 W |
| Load voltage at compression into 50 ohm, calculated | 39.76 V RMS, 56.23 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour on the same band at 41 dBm | HXC40013, 38 per cent efficiency |
| Neighbour on the adjacent window at 45 dBm | HXC40018, 5.0 to 5.3 GHz, 35 per cent |
Nine amperes on a ten volt rail
9.04 A is the figure that reorganises the whole power train. A converter that delivers 10 V at 9 A is a multiphase part in most products, and the ripple that reaches the drain has to be low enough that it does not appear as amplitude modulation on the output. The feed from the converter to the drain is also carrying the pulsed current of the modulation, so the inductance of that path is not a detail: at 4.7 GHz the choke is a distributed element, and the decoupling has to be placed against the drain pad rather than against the converter.
Fifty eight watts of heat is a cold plate problem, not a heatsink problem. On a 1 C per watt carrier the case rise is 59 C above the base plate, which means that at a 40 C base plate the case is at 99 C before any junction rise is added. The vendor publishes no thermal resistance, so the only honest statement is that the mounting, the interface material and the carrier determine whether this part survives, and that a first article with a thermocouple on the flange settles it in an afternoon.
The 3.16 W of drive has its own consequence. A driver at 35 dBm on 10 V draws around 8 A if it is the same family, or a quarter of that if it is a 28 V gallium nitride part. Most transmitters at this output put a gallium nitride driver in front of a gallium arsenide final stage for exactly that reason, and then the two rails have to be sequenced so the gate of the final stage is negative before the drain comes up.
Where the top of the ladder belongs
At 31.62 W at compression this part is sized for a ground station, a fixed point to point terminal, a test transmitter or a jamming and simulation source where the antenna is a horn or a cavity and the cable loss is a couple of decibels. The band covers the extended C band receive windows, the 4.9 GHz public safety allocation and a number of military data links, and a single 600 MHz match serves all of them.
One practical advantage of a 45 dBm part on a 10 V rail is that it keeps the whole transmitter on one low rail. A 28 V gallium nitride device of the same output would draw about 3.3 A, which is easier to feed, but it needs a 28 V source in a product that may otherwise run from 12 V. Where the 10 V rail already exists for the driver and the control board, staying on it removes a converter rather than adding one, and that trade is usually settled by the enclosure rather than by the radio frequency numbers.
The load voltage at compression is 40 V RMS into 50 ohm. Any connector, cable or circulator in the output path has to be rated above that, and a 56 V peak is enough to arc across a poor connector at altitude. On a ground station that is a maintenance question. On an airborne unit it is a specification.
Our defense grade components page covers the screening and traceability questions that come with this class of part when the end product is not commercial.
When to stop at the HXC40013 instead
The 41 dBm member of the family delivers 12.59 W with 38 per cent efficiency at 3.31 A. If the antenna needs 12 W rather than 30 W, the smaller part removes the multiphase converter, the cold plate and about 38 W of heat, and all of that at a lower unit price. The usual mistake in a new transmitter is to specify the final stage for the power the customer might ask for later, and then pay for it in every unit shipped.
Between 41 and 45 dBm the decision is a system one: whether the extra 4 dB is worth a second converter, a heavier chassis and a driver at 35 dBm. In a product family with a 10 W version and a 30 W version, the two devices can share a board outline and a bias network, which is often the cheapest way to cover both points. Our cross reference page lists the family side by side for that comparison.
Questions buyers ask before ordering HXC40014
Is 45 dBm guaranteed at the band edges? The vendor prints at least 45 dBm for the band with plus or minus 0.8 dB flatness, so the edges can sit at 44.2 dBm. A system that needs 45 dBm at 4.4 GHz exactly should buy the margin rather than assume it.
Does the part need a negative gate supply? The vendor does not publish the bias point, but a depletion mode gallium arsenide transistor of this class needs the gate held below the source before the drain is applied. The sequence and the negative rail are part of the transmitter, not of the transistor.
Is a circulator required? At 31.62 W into a mismatched load the reflected power is significant. On a continuous wave part with no published mismatch tolerance, a circulator and a load are the standard protection and should be in the budget from the start.
How do we start? Send the required output at the antenna, the duty and modulation, the ambient at the mounting surface and the rail available. We will confirm the part against the family ladder, quote from the current factory schedule and ship a sample with measured output, gain and efficiency at three points across the band.