Contact Us

OP291GSZ-REEL7

Brand: Analog Devices
Analog Devices OP291GSZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

OP291GSZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

OP291GSZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The OP291GSZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

OP291GSZ-REEL7: Three Megahertz on Paper, Thirty Kilohertz at Full Swing

The OP291GSZ-REEL7 is a micropower dual operational amplifier with a single supply range of 2.7 V to 12 V, a rail-to-rail input and output, a 300 uA per amplifier supply current, a 3 MHz gain bandwidth product, a 0.5 V per microsecond slew rate and a 700 uV offset voltage, with no phase reversal. The order code reads G for the SO package, S for the 8-lead body, Z for lead free and REEL7 for tape and reel. The family spans the single OP191 and the quad OP491.

The slew rate and the bandwidth meet at about 32 kHz

Half a volt per microsecond at 5 V peak to peak is 31.8 kHz of full power bandwidth. The 3 MHz gain bandwidth product at the same amplitude would allow far more, so the slew rate is the binding limit as soon as the signal is large. At 200 mV peak to peak the slew limited bandwidth rises to 796 kHz and the 3 MHz figure starts to be the real constraint. Reading the 3 MHz as a large signal number overstates the part by roughly a hundred times at full swing.

FunctionDual micropower amplifier, rail-to-rail input and output
Supply range2.7 V to 12 V single supply
Supply current300 uA per amplifier, 3 mW for the pair at 5 V
Gain bandwidth3 MHz, 30 kHz at a gain of 100
Slew rate0.5 V per microsecond, 31.8 kHz at 5 V peak to peak
Offset voltage700 uV, 9.2 LSB at 16 bits on a 5 V span
Phase reversalNone
Package8-lead SO

Where the 12 V ceiling is useful

A supply range that reaches 12 V covers a 5 V system with headroom for a 10 V analog span, and it covers a 12 V industrial rail directly without a pre-regulator. Rail-to-rail input and output on that range is what makes a single part usable for both a 3.3 V sensor front end and a 10 V output stage, and the 9.3 V of margin below the ceiling is what allows a 12 V rail with tolerance to sit on the part.

Seven hundred microvolts of offset is 9.2 LSB at 16 bits, which puts the part in the 12 bit class rather than the 16 bit class for DC accuracy. That is the honest way to use it: as a signal path amplifier where AC performance and supply range matter, and not as the DC front end of a high resolution converter.

Two questions buyers ask

Does the input really reach both rails?
The device is described as rail-to-rail input and output and specified on supplies down to 2.7 V. The input range should still be confirmed in the electrical table for the particular supply, because rail-to-rail descriptions usually carry a caveat at one end.

Can two channels share a 3.3 V rail with a 12 bit converter?
Yes on offset, where 700 uV is under two LSB of a 12 bit 3.3 V span. The bandwidth has to be matched to the signal amplitude, since the full swing slew limit is under 32 kHz.

What 300 uA per amplifier means over a year

Six hundred microamps for the pair is 3 mW at 5 V, and 5.26 Ah over a year of continuous operation. On a 12 V rail the same pair is 7.2 mW. Those numbers decide whether the part can stay powered in a battery instrument, and they are the reason the family exists alongside faster amplifiers that draw ten times as much. The trade is bandwidth: a 3 MHz part at 300 uA is a different product from a 30 MHz part at 3 mA, and the choice is made by the signal rather than by the catalogue.

The input range at the bottom of the supply range

At 2.7 V the part is close to the minimum operating voltage of a single lithium cell at end of discharge, and the rail-to-rail input means a signal that sits near either rail can still be amplified. The output reaches both rails as well, so a 2.7 V system can drive a converter that samples from 0 V to 2.7 V without a level shift. What has to be checked at that supply is the output current available at the top of the swing, because a rail-to-rail output near its upper limit sources less current into a load than it does at mid scale.

At the other end, a 12 V rail leaves 9.3 V of margin above the 2.7 V floor, which is what allows a 10 V analog span on an industrial supply. The same part therefore covers a 3.3 V sensor board and a 12 V industrial board, which is a supply chain simplification for a product family with two variants.

Where the offset does not matter

Seven hundred microvolts is 9.2 LSB at 16 bits, which rules the part out of a precision DC front end and rules it in for everything where the signal is larger. An AC coupled stage, a filter, a buffer driving a cable and a comparator input all put the offset far below the signal, and there the supply range and the 3 mW matter more than the last 700 microvolts. Reading the data sheet for the specification that matches the role is what separates a part that works from a part that happens to be in stock.

Ordering and supply

The OP291GSZ-REEL7 is the 8-lead SO, tape and reel, lead free code. The single is the OP191 and the quad the OP491, and the three share a data sheet, so the channel count is the field to confirm before a substitute is quoted.

We hold and source this family for production and repair quantities. Start from the family page for analog mixed signal ICs, check a proposed alternative against the amplifier cross reference, and if the driver is price rather than availability, the component cost reduction page covers what can be re-qualified without touching the board.

Request Quote — In Stock, 100% New & Original, Full Warranty