Contact Us

LTM8065IY#PBF

Brand: Analog Devices
Analog Devices LTM8065IY#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM8065IY#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM8065IY#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM8065IY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LTM8065IY: 2.5 A continuous from 40 V in, with the 3 MHz option and its cost

The LTM8065IY#PBF is a 40 V, 2.5 A continuous, 3.5 A peak step-down module in a 6.25 mm by 6.25 mm by 2.32 mm BGA. Output spans 0.97 V to 18 V, switching spans 200 kHz to 3 MHz, and the module includes the controller, the switches, the inductor and the support parts. The reference is 970 mV rather than the 774 mV or 800 mV used elsewhere in the family, which is the detail that catches a divider copied from a neighbouring part. Industrial grade, -40 to +125 degrees internal, with a 21 degrees per watt junction to ambient path.

Published values

ParameterValue
Input range3.4 V to 40 V
Output range0.97 V to 18 V
Continuous current2.5 A
Peak current3.5 A at 3.3 V out and 1 MHz
Switching frequency200 kHz to 3 MHz; RT of 232k, 41.2k and 10.7k for the three points
Feedback voltage970 mV nominal, 950 mV to 980 mV over temperature
BIAS minimum3.2 V for proper operation
Line and load regulation0.5 percent and 0.5 percent
Output ripple10 mV at 2.5 A
Shutdown current3 microamps into VIN, 1 microamp into BIAS
No load current8 microamps with BIAS at 0 V, 5 microamps with BIAS at 5 V
Loaded quiescent12 mA into BIAS at 2.5 A, 3.3 V out, 1 MHz
Power good window1.05 V falling and 0.89 V rising against a 970 mV reference
PackageBGA, 6.25 mm by 6.25 mm by 2.32 mm, 0.5 g, MSL 3
Thermal21 degrees per watt to ambient, 5.9 to the board, 36.5 to the top
Temperature grade-40 to +125 degrees internal

The thermal wall arrives above 5 V out

Forty degrees of junction headroom at 21 degrees per watt is 1.9 W. At 3.3 V and 2.5 A, which is 8.25 W out, the efficiency floor is 81.3 percent and the module has margin. At 5 V the floor is 86.8 percent, at 12 V it is 94 percent, and at 18 V and 2.5 A, 45 W out, it is 96 percent, which is above what a 40 V input can do at any frequency.

That does not make the 18 V rating wrong, it makes it conditional. The output range is a voltage range, the current is a current rating, and the pair is only available together at low ambient or with airflow. A 12 V rail at 2.5 A is realistic with a fan or a metal chassis; 18 V at 2.5 A is a short term or a 25 degree condition.

Three megahertz buys board area and costs efficiency

At 3 MHz the inductor ripple is small enough that the output capacitor can be a single 22 microfarad ceramic, and the loop responds fast enough that a load step of an amp settles in a few microseconds. The price is switching loss: the same 40 V to 5 V conversion that runs at 90 percent at 400 kHz will run several points lower at 3 MHz, and the gate charge and the switch node capacitance are the reason.

The other cost is conducted emissions, which do not disappear simply because the switching frequency moved up. A 3 MHz fundamental puts the first few harmonics above the 150 kHz to 30 MHz band's busiest region but the switch node edge still radiates, so the input filter and the board loop area remain the deciding factors. Filter the input as if the frequency had not changed, then measure.

The 970 mV reference and the 18 V ceiling

With a 970 mV reference, a 3.3 V rail needs a divider ratio of 2.40, which for a 10 k lower resistor is 14.0 k upper. Using the 774 mV values from an LTM8063 builds 3.96 V instead, a 20 percent error that looks like a broken module. Compute from the reference printed on the data sheet of the exact order code.

The 18 V output ceiling is not an arbitrary cap: above it the internal inductor and the switch rating stop being comfortable at 2.5 A, and the peak current limit of 3.5 A is only 40 percent above the continuous rating, which is tight for a load with a high inrush. A rail that feeds a capacitive load with a soft start set by TRSS is the way to stay inside it.

The pages that answer this most often are the power management cross reference for the family alternatives, OEM procurement for the acceptance test, and component lead time solutions for the case where a replacement has to be fitted before the next build.

Two questions buyers ask about the 2.5 A module

Can the module be synchronized to an external clock? Yes, from 200 kHz to 3 MHz, through the SYNC pin with a 0.4 V to 1.5 V threshold window. Locking several modules to one clock keeps their beat frequencies out of the audio band and out of a receiver's pass band.

What happens if BIAS is left open? The module still runs, but the internal bias draw comes from VIN and the efficiency at high input voltage drops. Tying BIAS to the output, when the output is at least 3.2 V, is what the published efficiency curves assume.