LTM4627IY#PBF
Product Specifications
LTM4627IY#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTM4627IY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTM4627IY#PBF: 15 A, 4.32 mm LGA, I grade
What this order code is
LTM4627IY#PBF combines the thinner body with the wider grade: the land grid array at 15 mm by 15 mm by 4.32 mm, and the I temperature letter, RoHS finish. The electrical behaviour is the family behaviour, 4.5 V to 20 V in, 0.6 V to 5 V out from a single resistor, 15 A, plus or minus 1.5 percent, remote sense, current mode, parallel to 60 A.
This is the code that gets chosen when a 12 V to 5 V or 12 V to 3.3 V rail has to sit under a low cover and still be guaranteed over an industrial window. It is also the code where the thermal arithmetic matters most, because the thinner body has less copper in its own stack and therefore leans harder on the board beneath it.
Parameters as published
| Item | Value |
|---|---|
| Output current | 15 A continuous |
| Input voltage range | 4.5 V to 20 V |
| Output voltage range | 0.6 V to 5 V, one external resistor |
| Total DC output error | plus or minus 1.5 percent |
| Efficiency | up to 93 percent at 12 V in, 3.3 V out |
| Control | current mode, fast transient response |
| Remote sense | differential amplifier |
| Parallel operation | up to four modules, 60 A total |
| Frequency | synchronisation to an external clock, multiphase |
| Light load | selectable pulse skipping or burst mode |
| Sequencing | soft start and output voltage tracking |
| Protection | overcurrent foldback, output overvoltage |
| Body | 15 mm by 15 mm by 4.32 mm LGA |
| Grade | I, limits in the ordering table |
Numbers that decide the application
A 5 V rail at 15 A is 75 W, the highest output this family can produce, and it is also the least efficient point in the family because the duty cycle is 41.7 percent at 12 V in and the switch has to carry a large current for a large fraction of the period. At an assumed 90 percent the input is 83.3 W, or 6.94 A from 12 V, and 8.3 W has to leave a body that is 0.6 mm thinner than the BGA version of the same part.
That is where the board becomes part of the component. Eight watts spread over 2.25 square centimetres is 3.7 W per square centimetre of footprint, and the only route out is through the pads into copper planes. A module on two layers of 1 oz copper with no thermal vias under the pads is a different component from the same module on eight layers with a ground plane and a via field, and the data sheet cannot tell the difference.
The 3.3 V case is the published one and the kindest: 49.5 W out, 3.73 W of loss, 22 W per square centimetre of delivered power. Between the two cases the current is the same and the loss more than doubles, which is the argument for choosing the rail first and the module second. For a 1 V core rail at 15 A the loss falls to 2.05 W at an assumed 88 percent, and four such modules in parallel make 60 A at 1 V with 60 W spread over four bodies.
Where it fits and where it does not
It fits a 12 V to 5 V rail in a low enclosure, a 3.3 V intermediate rail on a card with limited height, and an industrial line where the same board is sold over a wide ambient range. It does not fit a rail above 5 V, an input above 20 V, a board without copper under the module, or a load above 15 A per body without parallel units and their current sharing.
Supply and second source questions
The two letters travel together in stock but not always in supply, so an order that needs both the thin body and the wide grade has less choice than one that needs either. That is a planning question, not a technical one, and it is answered by lead time rather than by a substitution. The regulators that share these rails are compared on the power management cross reference page.
Sourcing notes and next step
We quote IY as written and we will flag the case where only the E grade or only the BGA body is on the shelf, because both are changes the line has to accept. Send the quantities and the date through the BOM shortage recovery page and we will answer with what is actually available. The wider module range sits on the analog and mixed signal IC page.
Request Quote — In Stock, 100% New & Original, Full Warranty