Contact Us

LTM4622AIY#PBF

Brand: Analog Devices
Analog Devices LTM4622AIY#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM4622AIY#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM4622AIY#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM4622AIY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTM4622AIY#PBF: the dual 2 A module in the BGA body with the I temperature letter

What this order code is

LTM4622AIY#PBF is the LTM4622A in the 6.25 mm by 6.25 mm by 2.42 mm BGA with the I temperature letter, tape and reel. The module provides dual 2 A outputs, or a single 4 A output, from an input of 3.6 V to 20 V, with an output range of 1.5 V to 12 V per channel, 3 A of peak current per channel, plus or minus 1.5 percent of total output error, external frequency synchronisation, multiphase current sharing, output tracking and a power good signal per channel.

The electrical behaviour is the one published for the family; the I letter is what this order code adds. It marks a different guaranteed window in the ordering information, and a programme that qualified the module around the E letter has to re-check the I column rather than assume the two are the same document. Nothing about the pin map or the external capacitor set changes.

Parameters as published

ItemValue
Output configurationdual 2 A, or single 4 A
Peak current3 A per channel
Input voltage range3.6 V to 20 V
Output voltage range1.5 V to 12 V per channel
Total output errorplus or minus 1.5 percent over load, line and temperature
Parallel operationmultiphase with current sharing
Synchronisationexternal clock through the mode pin
Sequencingtracking and soft start through the track pin
Indicatorspower good per channel
Protectioninput overvoltage, output overcurrent, overtemperature
Temperature letterI, guaranteed limits in the ordering information
Body6.25 mm by 6.25 mm by 2.42 mm BGA

Numbers that decide the application

The thermal arithmetic is unchanged by the letter and is the first thing to do on any module this size: 2 A at 1.2 V is 2.4 W of output with about 0.39 W of loss, 2 A at 5 V is 10 W with about 1.4 W of loss, and the single 4 A output at 1.2 V is 4.8 W with 0.78 W. All of those are small numbers in absolute terms and all of them are concentrated in 39 square millimetres, so the copper under the BGA is the heatsink and the letter only changes the ambient it is added to.

Current sharing across modules is what makes the small body scale. Two modules in multiphase give 4 A per channel or 8 A single with the heat split between two bodies, and the sharing is set by the mode and phase pins rather than by external resistors. The tracking pin is the sequencing tool: a rail can be made to follow another supply coincidentally or ratiometrically, which is how a board brings up a core rail after an input output rail without a separate sequencer part.

Total error of plus or minus 1.5 percent is 18 mV at 1.2 V and 180 mV at 12 V, and the second number is why a 12 V rail from this module usually feeds another regulator. The 3.6 V input floor rules out a 3.3 V backplane by 300 mV, and the 20 V ceiling allows an 18 V bus with a small transient margin but not a 24 V one. Peak current of 3 A per channel is a transient allowance: the output capacitor has to carry the difference between the peak and the continuous rating for the time the loop needs, so a 2 A load that steps to 3 A is inside the part and a 2 A load that steps to 4 A is not.

Where it fits and where it does not

It fits a point of load rail on a 12 V or 18 V bus in an industrial ambient, a dual rail analog section that has to be sequenced, a 6.25 mm square of board with a 2.42 mm height budget, and a line that needs the I letter for its qualification file. It does not fit a 3.3 V input, a 24 V bus, a continuous load above 2 A per channel, or an output below 1.5 V.

Supply and second source questions

The I letter and the A suffix are two separate attributes on this code and both have to be named in a substitute request, because the plain LTM4622 differs in output range and the E code differs in guaranteed limits. The second question is the capacitor set, which is specific to the module and travels with it. Modules grouped by their input and output ranges are compared on the power management cross reference page.

Sourcing notes and next step

We quote the A suffix, the I letter and the BGA body separately and will ask which rails the two channels feed, since the capacitor set and the sequencing depend on it. Send the line items, quantities and required date through the component lead time page and we will answer with availability. The wider power device list sits on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty