LTC7103EUHE#TRPBF
Product Specifications
LTC7103EUHE#TRPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC7103EUHE#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC7103EUHE#TRPBF: 105 V, 2.3 A buck regulator, E grade
What this order code is
LTC7103EUHE#TRPBF is the 105 V input synchronous step-down regulator in the thermally enhanced 5 mm by 6 mm QFN, E grade, tape and reel. It delivers up to 2.3 A with an output adjustable from 1 V to the input voltage, or one of eight pin selectable fixed voltages from 1.2 V to 15 V.
It is a monolithic converter rather than a module: the FETs are inside, the inductor and capacitors are outside, and the current is programmed and monitored internally without an external sense resistor. The family is qualified to CISPR 25 for emissions, runs from 200 kHz to 2 MHz with a phase lock loop, and passes the input to the output at 100 percent duty for dropout.
Parameters as published
| Item | Value |
|---|---|
| Input voltage range | 4.4 V to 105 V, 110 V absolute maximum |
| Output current | 2.3 A |
| Output voltage range | 1 V to V in, or eight fixed settings 1.2 V to 15 V |
| Switching frequency | 200 kHz to 2 MHz, programmable |
| Minimum on time | 40 ns |
| Quiescent current | 2 uA when regulating 48 V in to 3.3 V out |
| Efficiency | 93.5 percent at 12 V in, 5 V out |
| Emissions | CISPR 25 compliant |
| Current limit | brick wall, programmed without an external shunt |
| Bias supply | EXTV CC LDO from an output of 3.3 V to 40 V |
| Synchronisation | phase lock loop to an external clock |
| Body | 5 mm by 6 mm QFN |
| Grade | E |
Numbers that decide the application
The published efficiency points tell the whole story of a wide input part. At 5 V and 2.3 A the output is 11.5 W. From 12 V the efficiency is 93.5 percent, so the input is 12.30 W, the input current is 1.03 A and the loss is 0.80 W. From 48 V the efficiency is 88.3 percent, the input current falls to 0.27 A and the loss rises to 1.52 W. From 100 V the efficiency is 81.5 percent, the input current is 0.14 A and the loss is 2.61 W. The input current falls by a factor of seven across that range while the loss more than triples, which is the trade a high voltage converter always makes.
The 40 ns minimum on time is the limit on the switching frequency at high step down ratios. From 105 V to 5 V the duty cycle is 4.76 percent, and 40 ns of on time at that duty needs a period of 840 ns, which is 1.19 MHz. So 2 MHz is available for moderate ratios and not for a 21 to 1 ratio, and a board that sets the frequency by resistor without checking this will find the output dropping out of regulation at the top of its input range.
The 2 uA quiescent current is quoted at 48 V to 3.3 V, which is 96 uW and 17.5 mAh over a year. In a system that idles for most of its life that is the difference between a converter that can stay enabled and one that has to be cycled by a supervisor.
The 110 V absolute maximum is 5 V above the 105 V operating ceiling, so a 100 V bus sits inside the part with 5 V of margin and a clamp is still needed for transients above that.
Where it fits and where it does not
It fits a 48 V telecom or industrial bus, a 72 V or 96 V battery system, a 24 V to 5 V rail, an automotive or military input with load dump protection upstream, and any line that needs CISPR 25 emissions from a single stage. It does not fit a load above 2.3 A, a 2 MHz switching frequency at a 20 to 1 step down, or an input whose transients exceed 110 V.
Supply and second source questions
A wide input converter is usually compared on three numbers: the input ceiling, the current and the minimum on time. Parts that match the first two and not the third work at 12 V and fail at 100 V. The regulators and protection parts that surround these rails are compared on the power management cross reference page.
Sourcing notes and next step
We quote the EUHE code with the QFN body, the E grade and the tape and reel packing stated. Send the line items and required date through the BOM shortage recovery page and we will answer with availability. The wider analog range is on the analog and mixed signal IC page.
Request Quote — In Stock, 100% New & Original, Full Warranty