LTC6101HVBIS5#TRPBF
Product Specifications
LTC6101HVBIS5#TRPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC6101HVBIS5#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC6101HVBIS5 across the full industrial range
The LTC6101HVBIS5 combines the B grade letter with the I temperature letter in the five lead SOT-23, and it is the code that most industrial high side channels actually need: 5 V to 100 V of supply, 105 V absolute maximum, 1 mA of output current, and a guaranteed window that holds from -40 C to 125 C. The A grade and the B grade differ in the offset limit published in the ordering information, not in the supply range, the gain setting or the response time.
Reading the errors in the order they matter
At 100 V of common mode the 118 dB minimum rejection leaves 126 uV of input referred error, at 60 V it leaves 76 uV, and at 12 V it leaves 15 uV. The offset limit is published as 300 uV maximum for the family, so on a 50 mV sense drop the rejection term is a quarter of the offset term at the top of the range and a twentieth of it at 12 V. That ordering is what makes a 100 V channel behave differently from a 12 V one even though the part is the same: the higher the bus, the more the common mode term eats into the accuracy the shunt was chosen for.
Gain, output limit and the resistor pair
| Sense drop | Gain for a 1 V output | Output current into 1 kohm |
|---|---|---|
| 100 mV | 10 | 1.0 mA (at the limit) |
| 50 mV | 20 | 1.0 mA (at the limit) |
| 25 mV | 40 | 1.0 mA (at the limit) |
| 10 mV | 100 | 1.0 mA (at the limit) |
Every row lands on the 1 mA output limit because a 1 V output across 1 kohm is 1 mA by definition, which is the point: the family ceiling is reached at rated current whenever the output is 1 V, so the resistor has to be raised or the gain lowered to leave headroom for the fault current the channel will see. A 2 kohm resistor gives the same 1 V at half the current, and that headroom is what keeps the amplifier out of its limit during a short circuit rather than saturated at a value that tells the controller nothing.
Supply current and thermals
The published supply current is 250 uA at 12 V and 375 uA typical at 60 V. Over a year those are 2.19 Ah and 3.29 Ah. At 100 V the 375 uA is 37.5 mW, so the part is not limited by its own dissipation even in the 1 mm tall body; the nearby shunt is the heat source, and a 10 mohm shunt at 5 A is 0.25 W sitting on the same copper.
Where this code fits
Industrial 48 V and 60 V rails, motor drive phase current, battery string monitoring on a high voltage pack, and any channel that has to keep its accuracy from a cold store to a hot cabinet. The 1 us response for a 0 V to 2.5 V output step suits a comparator trip; a firmware loop that samples at 10 kHz does not need it, and can average the output to buy back resolution.
Sourcing notes and next step
Because the grade and temperature letters are the only difference between neighbouring codes, a cross reference that matches on supply range and package alone can land on a commercial temperature part for an industrial slot. Ask for the full order code and the date code, then compare the offset budget against the shunt drop. Our ADI second source page lists what we hold or can quote against a code, the lead time page covers the schedule case, and the analog and mixed signal category holds the rest of the current sense family.
Request Quote — In Stock, 100% New & Original, Full Warranty