Contact Us

LT3060MPTS8#TRPBF

Brand: Analog Devices
Analog Devices LT3060MPTS8#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3060MPTS8#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3060MPTS8#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3060MPTS8#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3060MPTS8#TRPBF: the adjustable 45 V input regulator, minus 55 C, ThinSOT

The LT3060MPTS8#TRPBF is the adjustable member of the LT3060 family in the 8-lead ThinSOT, tape and reel, MP grade. The internal reference is 600 mV, so a two resistor divider sets any output between 600 mV and 44.5 V, and the part still works from an input as low as 1.6 V and as high as 45 V at 100 mA. This is the code to use when a board has one 24 V rail and needs an odd output such as 4.2 V, 9 V or 12 V, or when the same board has to serve several output voltages without a new part number. The price of that flexibility is the divider, which adds an error term and a load term the fixed versions do not have.

Published values

ParameterValue
Input voltage1.6 V to 45 V, 50 V absolute maximum
Reference voltage600 mV, 594 mV to 606 mV at 25 C, 585 mV to 612 mV over temperature on MP and H
Output range600 mV to 44.5 V, set by an external divider
Output current100 mA, current limit with foldback
Dropout voltage300 mV typical at 100 mA
Line regulation0.6 mV typical, 3.5 mV maximum, 2.1 V to 45 V input
Load regulation0.2 mV typical, 4 mV maximum, 1 mA to 100 mA
ADJ pin bias current15 nA typical, 60 nA maximum, flowing out of the pin
Quiescent current40 uA typical at no load
Package8-lead ThinSOT, part marking LTDTF
Thermal resistance57 C/W to 67 C/W junction to ambient, 25 C/W to case
GradeMP, minus 55 C to 150 C junction

The divider is part of the specification

The vendor tests the adjustable part with a specific divider, 115 kOhm on the bottom and 365 kOhm on top, for a 2.5 V output, and that divider draws about 5 uA of DC load which is not counted in the quiescent current figure. Two consequences follow. The ADJ pin bias current of 15 nA flows out of the pin, so it adds to the current in the bottom resistor and shifts the output by its value times the resistor; keeping the divider current near 10 uA holds that error to a few millivolts, which is why the datasheet caps the top resistor at 62 kOhm for a 600 mV output. And the divider amplifies the reference noise by the same ratio that it sets the output, so a 12 V output from a 600 mV reference multiplies the noise twentyfold unless a feedforward capacitor is fitted from OUT to ADJ, doubled whenever the divider current is doubled.

Minimum input voltage is not the same as the dropout figure

The input range starts at 1.6 V, but that is the floor at which the part still functions. At 100 mA the minimum input voltage is quoted between 1.6 V and 2.1 V depending on the part, and for the low voltage options such as 1.2 V, 1.5 V and 1.8 V the dropout specification is limited by that minimum input requirement rather than by the pass element. In other words, a 1.8 V output from a 2.5 V rail is not governed by the 300 mV dropout number at all; it is governed by whether the input is above the minimum. This is the kind of distinction that shows up as an unexplained drop-out at end of battery life, and the vendor's minimum input voltage curve is the place to check it rather than the features page.

Protection and the reverse battery case

All members of the family include reverse battery protection, reverse output protection and reverse output to input protection, plus current limit with foldback and thermal shutdown at about 165 C typical. The input pin is rated to plus or minus 50 V absolute and the SHDN pin to plus or minus 50 V as well, which matters on a 24 V bus where an inductive kick can push the rail past the nominal. Reverse output current is tested by grounding the input and forcing the output to its rated voltage, and that current flows into the OUT pin and out of the ground pin, so a board that holds a charged capacitor on the output while the input collapses is inside the intended test condition rather than outside it.

Choosing the adjustable code over a fixed one

The adjustable body is the same die as the fixed codes but without the internal divider, so its load regulation, line regulation and noise all depend on parts the buyer supplies. That is the reasonable choice for a single odd voltage and a poor choice for a high volume 3.3 V rail, where the fixed code removes two components and two error terms. Substitutions between fixed and adjustable codes are not pin compatible in function even though the package is the same. The comparison work sits on the power management cross reference, the shortage route for a single line item is BOM shortage recovery, and holding several rails under one supplier is described on one stop BOM sourcing.