Contact Us

LT3060MPTS8-5#TRPBF

Brand: Analog Devices
Analog Devices LT3060MPTS8-5#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT3060MPTS8-5#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT3060MPTS8-5#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT3060MPTS8-5#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LT3060MPTS8-5#TRPBF: 5 V at 100 mA from a 45 V input, minus 55 C grade in ThinSOT

The LT3060MPTS8-5#TRPBF is the fixed 5 V member of the LT3060 family in the 8-lead ThinSOT body, tape and reel, in the MP temperature grade. It takes 1.6 V to 45 V in, delivers 100 mA, and holds the output to plus or minus 2 percent over line, load and temperature. The part is aimed at the case where a 24 V or 48 V industrial bus has to produce a quiet 5 V rail for a sensor front end without a switching stage in front of it. Three things separate it from a three terminal regulator: 40 uA of quiescent current, a single capacitor on REF/BYP that sets both the noise floor and the soft start ramp, and protection against reverse input, reverse output and reverse output to input.

Published values

ParameterValue
Input voltage1.6 V to 45 V, absolute maximum 50 V
Output voltage5 V fixed, 4.900 V to 5.100 V at 25 C
Output tolerancePlus or minus 2 percent over line, load and temperature
Output current100 mA, current limit with foldback
Dropout voltage300 mV typical at 100 mA
Quiescent current40 uA typical, 80 uA maximum at no load
Shutdown currentBelow 1 uA, REF/BYP capacitor reset
Output noise30 uV RMS, 10 Hz to 100 kHz, with 10 nF on REF/BYP
Minimum output capacitor2.2 uF ceramic, no ESR required
Package8-lead ThinSOT, part marking LTFWH
Thermal resistance57 C/W to 67 C/W junction to ambient by copper area, 25 C/W to case
GradeMP, minus 55 C to 150 C junction, tested over the full window

What the MP grade actually buys

The four grades of this part are four different test claims on one die. The E grade is tested at 25 C and its 0 C to 125 C window is guaranteed by characterization. The I grade is guaranteed over minus 40 C to 125 C. The H grade is tested at 150 C. The MP grade is tested over the whole minus 55 C to 150 C range. In a cold cabinet the difference between an I code and an MP code is whether the start-up behaviour at minus 45 C has been measured or inferred, and that is a qualification question rather than a price question. The datasheet is also explicit that operating lifetime is derated above 125 C, so the last 25 C of the MP window is overload headroom, not a place to park the junction.

Two specifications the ThinSOT body does not guarantee

Two notes in the electrical table matter more than the headline numbers. The dropout specification is guaranteed for the DFN package, and for the ThinSOT body high current dropout cannot be guaranteed because of production test limits. The load regulation specification is guaranteed for the fixed voltage options in the DFN package, and for the fixed options in the ThinSOT body it cannot be guaranteed for the same reason; those parts are tested in the same way as the adjustable version with ADJ tied to OUT. In practice a 5 V rail that only has to sit inside plus or minus 2 percent is unaffected, but a program that writes its own regulation budget from the 3.7 mV typical figure and then buys the TS8 code is relying on a number the vendor does not warrant. Where load regulation has to be held, the DFN code is the one to schedule.

The thermal budget at 45 V input

The dissipation is the input to output differential times the load current, plus the quiescent term. A 5 V output at 100 mA from a 24 V rail is 1.9 W in the pass element. At the 57 C/W end of the ThinSOT table with full copper that is a 108 C rise, and at the 67 C/W end with a 50 square millimetre pad it is 127 C. Neither fits an 85 C ambient. The vendor's own protection is current limit foldback with input to output differential, so the part does not sit at full current into a short, but the foldback is protection rather than a thermal budget. Working backwards from a 125 C junction limit and an 85 C ambient at 57 C/W gives 0.70 W of allowed dissipation, which at a 19 V differential is about 37 mA of load, not 100 mA. A 5 V rail that needs the full 100 mA from a 24 V bus belongs on the DFN body with a via array under the exposed pad, or upstream of a switching stage.

Noise, soft start and the REF/BYP capacitor

The REF/BYP pin does two jobs with one component. A 10 nF capacitor to ground gives the 30 uV RMS noise figure quoted in the features, and the same capacitor sets the soft start ramp, so the inrush into the output capacitor is a controlled slope rather than a step. In shutdown the pin is discharged, which means the next enable starts from the same point every time. Because the output is fixed at 5 V there is no external divider to amplify the internal 600 mV reference, which is why the fixed codes are the quieter option in this family and why the adjustable code needs a feedforward capacitor across the top resistor when its divider is large.

Sourcing the MP code

Wide temperature linear parts are the first line to go short, because automotive and avionic programs take the H and MP grades before the catalogue houses stock the E and I codes. Files that carry several LT3060 rails are easier to hold on one cross reference, which is what the power management cross reference covers. A line that has gone short is handled on BOM shortage recovery, and the schedule for the ThinSOT body is on the lead time page. Where a substitution is proposed, the test coverage question above is the one to ask before the price is agreed.