Contact Us

ADUM1410ARWZ

Brand: Analog Devices
Analog Devices ADUM1410ARWZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADUM1410ARWZ — Analog & Mixed-Signal ICs | Superb Automation

ADUM1410ARWZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADUM1410ARWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADUM1410ARWZ: four isolated channels at 10 Mbps, without an optocoupler's spread

The ADUM1410ARWZ is a four channel digital isolator from the ADuM1410/1411/1412 family, built on transformer coupling rather than an LED and a photodiode. It passes up to 10 Mbps, works with 3 V or 5 V supplies on either side with level translation between them, and is specified to 105 C. For a board that has to move SPI or a converter bus across an isolation barrier, the reason to use it is that the current transfer ratio, the ageing of the LED and the temperature drift of an optocoupler all disappear from the error budget.

Published values

ParameterValue
ChannelsFour, in one direction or split depending on the family member
Data rateUp to 10 Mbps, NRZ
Supply3 V or 5 V on each side, with 3 V to 5 V level translation
Current per channel at 5 V1.3 mA maximum up to 2 Mbps, 4.0 mA maximum at 10 Mbps
Current per channel at 3 V0.8 mA maximum up to 2 Mbps, 1.8 mA maximum at 10 Mbps
TemperatureSpecified to 105 C
Transient immunityGreater than 25 kV per us common mode
Working voltage560 V peak maximum working insulation voltage
Package16-lead SOIC wide body, RoHS compliant
Default output stateProgrammable

The barrier specification is the one to read carefully

A 560 V peak maximum working insulation voltage is a continuous working figure, not a test figure, and it is the number that has to clear the system requirement with margin. The 25 kV per microsecond common mode transient immunity is what keeps the channel from producing a false edge when a motor or an IGBT switches near the barrier, which is the failure mode that a slow optocoupler usually shows as a corrupted byte rather than a dead channel.

Power budget across the barrier

Per channel current is quoted at two data rates because the part draws more when the channel is switching. At 5 V and 10 Mbps the figure is 4.0 mA per channel, so four channels plus the quiescent current is a measurable load on an isolated supply. At 3 V the same traffic costs 1.8 mA per channel, which is why a 3.3 V isolated side is the cheaper choice when the remote side can run at 3.3 V.

Where the family members differ

The four channels can be arranged as all in one direction or split between directions, and the three members of the family differ in that arrangement and in the default output state. Picking the wrong member gives a board that works on the bench in one direction and not the other, so the channel direction map is checked against the data sheet before a part is ordered, not after the first article.

Two pages worth reading before a purchase order goes out are vendor consolidation and one stop BOM sourcing; the first lists what else fits the socket, the second is the test sequence for a drop in, and component lead time solutions covers the case where the shortage is already on the line.

Two questions buyers ask

Can the ADUM1410 replace an optocoupler in an existing socket? Not directly. The pinout, the drive current and the output structure differ, so an optocoupler replacement is a board change. Within the isolator family the members are pin compatible, which is where a substitution is practical.

Does it need a separate isolated supply on each side? Yes, the barrier is a data barrier, not a power barrier. Power across the isolation is a separate decision, either an isolated DC to DC converter or an isolated supply module.