Contact Us

ADRV9025ABBCZ-REEL

Brand: Analog Devices
Analog Devices ADRV9025ABBCZ-REEL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADRV9025ABBCZ-REEL — Analog & Mixed-Signal ICs | Superb Automation

ADRV9025ABBCZ-REEL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADRV9025ABBCZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADRV9025ABBCZ-REEL: Four Transmitters and Four Receivers in One Wideband Radio

What this part is

The ADRV9025 order code belongs to the wideband radio family that Analog Devices documents as the ADRV9026 and the ADRV9029, and the vendor uses the 9025 number as the family reference in its software interfaces. Each device in the family carries four independently controlled transmitters, four independently controlled receivers, and two time shared observation receivers with two inputs each, together with the fractional synthesizers, the clock synthesizer and the digital filtering that would otherwise sit in the baseband.

The transmitters are direct conversion modulators with an adjustable digital chain in front of them, the receivers are direct conversion with automatic or manual attenuation control, direct current offset correction and quadrature error correction, and the observation path is there to linearise a power amplifier through digital pre distortion. Multiple devices can be phase synchronised so that a large antenna array keeps a common local oscillator and a common baseband clock. The digital interface is a 24.33 gigabit per second serial link in the JESD204B or JESD204C format.

Published figures that matter to a buyer

Transmitters4, differential, independently controlled
Receivers4, differential, independently controlled
Observation receivers2, time shared, 2 inputs each
Centre frequency75 MHz to 6,000 MHz for the 9026 and 9029 members
Receiver bandwidth200 MHz maximum
Transmitter large signal bandwidth200 MHz maximum
Transmitter synthesis bandwidth450 MHz maximum
Observation bandwidth450 MHz maximum
Synthesizersfive phase locked loops, all internal
Duplextime division and frequency division both supported
Digital interface24.33 gigabits per second, JESD204B and JESD204C
Synchronisationmultiple chip phase alignment of local oscillators and clocks

Where the headline numbers stop

The frequency range needs an explicit warning on this order code. The 75 MHz to 6 GHz figure belongs to the ADRV9026 and the ADRV9029 pages, and the vendor forum states that the 9025 variant starts at 650 MHz instead. The span is 80 to 1 at the lower figure and 9.2 to 1 at the higher one, which changes what the part can do in a low band application, so the start frequency has to be confirmed from the 9025 data sheet rather than carried across from the family page.

Twenty four point three three gigabits per second across four converters is 6.08 gigabits per second per converter, which is the number that decides the field programmable gate array transceiver count and the lane assignment. A 200 MHz receive bandwidth needs 400 megasamples per second at two samples per hertz, so the converter rate and the link rate have to be planned together; a link that is sized on the sample rate alone will be short once framing and overhead are counted.

The transmitter synthesis bandwidth of 450 MHz against a 200 MHz large signal bandwidth is a factor of 2.25, so the extra bandwidth is not there to transmit a wider signal. It is there so that the interpolation and the digital pre distortion can work with margin at the edges of the band, and a channel that uses the 450 MHz figure as a signal bandwidth will not meet the transmit mask.

Applications where it fits

  • Macro base stations and massive multiple input multiple output antenna arrays.
  • Small cell radios where four channels share one device.
  • Point to point microwave and backhaul links.
  • Active antenna systems that need phase alignment across many devices.
  • Instrumentation and research radios that need four coherent transmit and receive paths.

Two questions buyers ask

What is the difference between the 9026 and the 9029? The 9029 adds integrated digital pre distortion and crest factor reduction, so the observation path is used inside the device rather than by the baseband. The 9026 leaves that work to the host. Both are four transmitter and four receiver parts, and the 9025 order code is the family reference the software uses, which is why a bill of materials and a driver name can disagree.

Is this the part to specify for a new programme? The vendor marks the 9026 as recommended for new work, so a new programme should be comparing against that part rather than against the 9025 order code this page describes. For an existing board the 9025 code is the one in the bill of materials, and the question is availability and the alignment of the software revision with the silicon revision.

Sourcing notes and next step

ADRV9025ABBCZ-REEL is the tape and reel packing of the ball grid array body. Parts in this class are programmed and calibrated, and the software revision valid for a silicon revision is part of the part number discussion rather than an afterthought. The RF component sourcing page covers the transmit and receive chain around the radio, the lead time page sets out the route when a wideband radio is quoted long, and the analog and mixed signal IC family page lists the rest of the RF line.

Request Quote — In Stock, 100% New & Original, Full Warranty