Contact Us

ADP160AUJZ-2.5-R7

Brand: Analog Devices
Analog Devices ADP160AUJZ-2.5-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADP160AUJZ-2.5-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADP160AUJZ-2.5-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADP160AUJZ-2.5-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADP160AUJZ-2.5-R7: a 2.5 V fixed low dropout regulator at 560 nA of quiescent current

What this order code is

ADP160AUJZ-2.5-R7 is the 2.5 V fixed output member of the ADP160 family, a CMOS linear regulator that delivers up to 150 mA from an input between 2.2 V and 5.5 V. The headline is the quiescent current: 560 nA with no load and 860 nA with a 1 microamp load. Fifteen fixed voltages from 1.2 V to 4.2 V are offered in the family, and the adjustable versions carry different family numbers, so the 2.5 V code is one specific trimmed output and not a resistor setting.

The regulator is stable with 1 microfarad ceramic capacitors on input and output, with plus or minus 30 percent tolerance allowed on those parts. It includes a switched resistor that discharges the output when the device is disabled, which is a real function on a rail that has to fall quickly at power down. Shutdown current is under 50 nA typical. The package for this code is the 5-lead TSOT, and the same die is also offered in a 4 ball wafer level package.

Parameters as published

ItemValue
Output voltage, this code2.5 V fixed
Maximum output current150 mA
Input voltage range2.2 V to 5.5 V
Quiescent current, no load560 nA
Quiescent current at 1 microamp load860 nA
Dropout at 150 mA195 mV
Initial accuracyplus or minus 1 percent
Accuracy over line, load and temperatureplus or minus 3.5 percent
Shutdown currentunder 50 nA typical
Ripple rejection72 dB at 100 Hz
Output discharge at disablepresent on this member
Package5-lead TSOT, 4 ball WLCSP alternative

Numbers that decide the application

The 195 mV dropout at 150 mA is a 1.3 ohm pass element, so a 2.5 V output needs at least 2.695 V at the input. On a 3.3 V rail that leaves 605 mV of headroom and the regulator holds regulation at full load; on a 3.0 V rail the headroom is 305 mV and still sufficient; on a 2.7 V rail, only 5 mV of margin remains over the guaranteed dropout and the rail is effectively outside the part. That single calculation decides more rails than the quiescent current does.

Quiescent current of 560 nA is 4.91 mAh over a year and 860 nA is 7.53 mAh, both small next to a coin cell. The figure that matters is the ratio: at a 1 microamp load the regulator's own current is 86 percent of the load current, so below a few microamps the efficiency of the rail is set by the quiescent current and not by the dropout. Above 100 microamps the dropout term dominates instead.

Dissipation is straightforward. From 3.3 V to 2.5 V at 150 mA the regulator drops 0.12 W; from 5 V to 2.5 V at the same current it drops 0.375 W, which in a 5-lead TSOT is the number to check against the thermal resistance before quoting the full 150 mA from a 5 V rail. The plus or minus 3.5 percent accuracy over all conditions is 87.5 mV on a 2.5 V output, and that is the figure a downstream 2.5 V reference or analog supply has to live with, not the plus or minus 1 percent initial number.

Selection and cross reference notes

The family splits on two functions that are easy to confuse. The ADP160 and ADP161 include the output discharge resistor; the ADP162 and ADP163 are identical but without it. A board that relies on the rail collapsing quickly at shutdown cannot use the no-discharge member as a substitute, even though every other number matches. The adjustable members are only offered in the 5-lead TSOT, so a board that needs the wafer level package at a non-standard voltage has no adjustable option.

When comparing against other low quiescent current regulators, the ordering of the numbers matters: first the dropout at the real load, then the quiescent current at the real load, then the accuracy over temperature. Two parts that both claim sub-microamp quiescent current can differ by a factor of three in dropout, and the dropout decides whether the rail works at the bottom of the battery.

Where it fits

Battery powered and portable equipment is the target: mobile handsets, cameras and audio devices, portable medical devices, and post regulation after a switching converter where a quiet 2.5 V rail is needed from a 3.3 V intermediate. The 72 dB of ripple rejection at 100 Hz makes it a reasonable second stage behind a 3.3 V switcher, and the 1 microfarad ceramic stability keeps the parts count at two capacitors. Buyers working on medical builds can start at the medical device components page, and teams checking lead time on this family usually use the component lead time solutions page.

Buying notes

The code splits into the family, the body and the reel: AUJZ is the 5-lead TSOT, 2.5 is the fixed output, and R7 is the reel. The same family in the wafer level package carries a different body code, so a quotation that lists ADP160 alone may be for a part that will not fit the land pattern. Voltage options are trimmed at the factory, which means a 2.5 V code cannot be replaced by a 2.8 V code with a resistor change.

Sourcing notes and next step

These parts move in large volumes and the practical question is almost always the exact voltage code against the reel size. We quote against a bill of materials with the full order string, and where a specific voltage is short we say so rather than offering a nearby one. Send the codes and quantities through the BOM shortage recovery page and we will answer with stock, packaging and the date code window.

Request Quote — In Stock, 100% New & Original, Full Warranty