Contact Us

ADL5611ARKZ-R7

Brand: Analog Devices
Analog Devices ADL5611ARKZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADL5611ARKZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADL5611ARKZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADL5611ARKZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADL5611ARKZ-R7: 22.2 dB Gain Block From 30 MHz to 6 GHz in SOT-89

The ADL5611ARKZ-R7 is the SOT-89 body of the ADL5611, a single-ended RF and IF gain block that covers 30 MHz to 6 GHz with 22.2 dB of gain, internally matched to 50 Ohm at both ports, in production. The part runs from a single 5 V supply at 94 mA, which is 470 mW, and the vendor quotes 40.0 dBm of output third order intercept, 21.0 dBm of output compression and a 2.1 dB noise figure at 900 MHz. Those three numbers together are what a receiver front end cares about, and having them at once is the reason this part exists rather than a discrete transistor stage. For the wider line up of RF building blocks, the amplifier cross reference is the page that lines up gain blocks, drivers and low noise stages.

What the numbers actually mean

With 22.2 dB of gain and a 21.0 dBm output compression point, the input compression point is about minus 1.2 dBm, so the stage is limited by what comes before it rather than by its own input. The 40.0 dBm intercept against a noise floor of minus 171.9 dBm per hertz, which is the thermal floor plus the 2.1 dB noise figure, gives a spurious free dynamic range of about 101 dB in a 1 MHz bandwidth. That is the figure a receiver planner uses to decide where in the chain this block belongs.

ParameterFigureWhat it decides in a build
Frequency range30 MHz to 6 GHzOne part covers IF and the first RF stage of several bands
Gain22.2 dB, internally matched to 50 OhmNo external matching network, only dc blocks and a bias inductor
Output intercept40.0 dBm at 900 MHzAbout 101 dB of spurious free range in a 1 MHz bandwidth
Output compression21.0 dBm at 900 MHz3.55 V peak into 50 Ohm, which is what a 5 V rail has to deliver
Noise figure2.1 dB at 900 MHzSets the cascaded noise of everything behind this stage
Supply5 V, 94 mA470 mW, so the SOT-89 tab is the thermal path
Temperatureminus 40 to plus 105 degrees CRated for an outdoor radio unit, not only a bench

Where it can surprise a build

The 21.0 dBm compression point is 3.55 V peak into 50 Ohm. On a 5 V supply that is possible only with a push-pull output stage and a clear headroom budget, and it means the figure degrades when the rail sags. A radio that runs from 5 V plus or minus 5 percent and expects the full compression point at the bottom of the tolerance band is asking for a number the part does not promise.

Internal 50 Ohm matching is a statement about the ports, not about the board. The only external parts the vendor calls for are the input and output dc blocks, the supply decoupling and the bias inductor, and each of those is part of the match. A bias inductor with the wrong self resonance turns a 6 GHz gain block into a 3 GHz one, and a dc block with the wrong value costs low end response.

The gain is flat over frequency, temperature and part to part by intention, which is what makes the block usable in a calibrated instrument. Even so, 22.2 dB is a nominal, and a receiver that derives absolute power from the gain figure needs the receive chain calibrated at the antenna port, not assembled from nominal gains.

Applications and how it fits a radio

RF and IF gain blocks in cellular infrastructure, microwave radios, test equipment and instrumentation. On a transceiver board the part is often the last stage before a mixer, where the intercept matters, or the first stage after a filter, where the noise figure matters. When a production line has to bridge a supply gap on a specific order code, component lead time solutions covers holding a qualified alternative rather than re-spinning the board.

Other gain blocks, drivers and low noise amplifiers with the same supply and package options are on the analog and mixed-signal IC page.

Questions buyers ask about this order code

Does the ARKZ-R7 code mean a different grade? It is the SOT-89 package on a reel. The electrical table is the family table, so a substitute in a different package has the same die and a different thermal path, which matters at 470 mW.

Can it run from 3.3 V? The part is specified at 5 V and the bias circuit is built around that current. Dropping the rail changes the bias point and with it the intercept and the compression numbers, so the 3.3 V case is a different set of measurements, not the same part at a lower voltage.

What is the part to part gain spread? The vendor specifies the gain over frequency, temperature and device, which is the useful form of the answer: the spread is inside the guaranteed window rather than a typical plus or minus figure. For a chain that stacks several of these, the window is what has to be budgeted.

Request Quote — In Stock, 100% New & Original, Full Warranty