Contact Us

ADG821BRMZ

Brand: Analog Devices
Analog Devices ADG821BRMZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG821BRMZ — Analog & Mixed-Signal ICs | Superb Automation

ADG821BRMZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG821BRMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG821BRMZ: 0.5 ohm on resistance that stays at 0.8 ohm maximum up to 125 C

The ADG821BRMZ is a dual single pole single throw switch built for current carrying rather than for precision alone. On resistance is 0.5 ohm typical and 0.8 ohm maximum at 125 C, flatness is 0.15 ohm typical and 0.3 ohm maximum at 125 C, and the part is specified across the full automotive temperature range. It runs from 1.8 V to 5.5 V, carries up to 200 mA, and comes in an 8-lead MSOP.

Published values

ParameterValue
Supply1.8 V to 5.5 V single supply
On resistance0.5 ohm typical, 0.8 ohm maximum at 125 C
Flatness0.15 ohm typical, 0.3 ohm maximum at 125 C
Currentup to 200 mA
Switch timetON 33 ns typical, 45 ns maximum
Leakage0.01 nA typical, 0.25 nA maximum
Temperaturespecified from -40 C to +125 C
Package8-lead MSOP

Where 0.5 ohm changes the answer

Into an 8 ohm load, the resistance a small speaker or a current shunt presents, 0.5 ohm is 5.9 percent of the path and the switch has to be treated as part of the circuit. Into 100 ohm it is half a percent. The reason to buy this part rather than a 4 ohm switch is exactly that first case: a signal path that carries real current, such as power routing between a battery and a load, or a shunt that is switched in and out of a measurement chain.

At 200 mA the 0.8 ohm maximum dissipates 32 mW in the package, which the MSOP can hold at 125 C ambient, and drops 160 mV. That drop is a real voltage loss and must be subtracted from the headroom of whatever sits downstream.

The temperature number is the one to quote

Many low resistance switches publish a room temperature typical and then let the resistance double by 125 C. This part publishes 0.8 ohm maximum at 125 C, so a module that has to hold its error over temperature can be built from one number instead of a curve. On a thermal cycling product, an automotive module or a motor drive, that is the difference between a specification that survives qualification and one that does not.

Driving the control input

Turn on of 33 ns typical is fast enough that the control line should be treated as a digital net: keep it short, keep it away from the analog side of the package, and do not route it across a split in the ground plane. The digital input threshold is set by the supply, so on a 1.8 V rail a 3.3 V driver will overdrive the input unless the pin is current limited or level shifted.

Two pages worth reading before a purchase order goes out are component lead time solutions and BOM shortage recovery; the first lists what else fits the socket, the second is the test sequence for a drop in, and how to reduce component cost covers the case where the shortage is already on the line.

Two questions buyers ask

Can the ADG821 carry a motor? No. 200 mA is the published continuous current. A small motor stall current is several times its running current and an inductive load needs a freewheel path that a CMOS switch does not have. For a motor, use the switch as a signal and a discrete device as the power element.

What replaces the ADG821 if it is not available? The ADG822 and ADG823 share the same silicon and the same 0.5 ohm switch and differ only in the control logic and in which switch is normally open. Moving between them is a truth table change, not a board change, which is why the three order codes are usually quoted together on a shortage.