ADG1433YRUZ-REEL7
Product Specifications
ADG1433YRUZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADG1433YRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADG1433YRUZ-REEL7: Three Changeover Switches at 4.7 Ohm
What this part is
The ADG1433 is three independently selectable single pole double throw switches in one package, built on a process that combines high voltage CMOS with bipolar transistors. Each channel connects a common pin to one of two throws, with break before make action so the two throws are never shorted together during a changeover. On resistance is 4.7 Ohm maximum at 25 degrees C with 0.5 Ohm of flatness across the signal range, which is what makes the part usable in a signal path rather than only as a logic level router.
The part is specified at plus or minus 15 V, at plus 12 V and at plus or minus 5 V, so the same order code covers the three supply arrangements that most industrial analogue boards use. The digital inputs accept 3 V logic levels regardless of the analogue supply, and an enable pin switches all three channels off at once. The YRUZ suffix is the 16 lead TSSOP on a 7 inch reel.
Published figures that matter to a buyer
| Configuration | 3 single pole double throw switches |
| On resistance | 4.7 Ohm maximum at 25 degrees C |
| On resistance flatness | 0.5 Ohm |
| Supply options | plus or minus 15 V, plus 12 V, plus or minus 5 V |
| Logic levels | 3 V compatible inputs |
| Continuous current per channel | up to 115 mA |
| Switching action | break before make |
| Signal range | rail to rail |
| Enable pin | one pin switches all channels off |
| Package | 16 lead TSSOP, tape and reel |
| Process | 33 V capable, latch up resistant |
Where the headline numbers stop
The 4.7 Ohm has to be compared with what it sits in series with. Into a 1 kOhm load it is 0.47 percent of gain error, into 10 kOhm it is 0.047 percent, and into a 50 Ohm RF path it is nearly 10 percent. That is why this switch belongs in instrumentation and control signal routing rather than in a signal path where the source impedance is low. The 0.5 Ohm flatness is 10.6 percent of the on resistance, so the distortion the switch contributes is set by the flatness rather than by the absolute value.
The current rating and the resistance have to be read together as well. At the 115 mA continuous limit each channel drops 540 mV and dissipates 62 mW, so three channels all carrying that current put 186 mW in a 16 lead TSSOP, which is warm but manageable. The break before make action means there is a brief open circuit at each changeover, which is the safe behaviour for a signal path but a problem for a circuit that needs continuous current, such as a current sense loop.
Applications where it fits
- Relay replacement in instrumentation, where a mechanical changeover is too slow or too large.
- Data acquisition systems that route one converter input across several sensors.
- Gain switching in amplifier stages where a small series resistance is acceptable.
- Avionics and medical equipment where break before make action prevents a transient short between channels.
Two questions buyers ask
Can it switch a signal below the negative rail? No. The signal range is rail to rail, so the switch passes signals between the two supplies and no further. On a plus or minus 15 V supply the range is plus or minus 15 V, and a signal that goes beyond that forward biases the internal structure even though the process is described as latch up resistant.
What happens when the enable pin is low? All three channels switch off, so the commons float rather than being tied to either throw. In a system where an unpowered switch must not look like a valid connection, that is the right behaviour, but a controller that reads the common pin has to expect an undefined level rather than a defined one.
Sourcing notes and next step
The ADG1433YRUZ-REEL7 is the 16 lead TSSOP on a 7 inch reel, and the same family includes a four channel version and a 20 lead body for boards that need more throws. Because the part is specified at three supply arrangements, the substitution question is usually about the supply rather than the function. The analog and mixed signal IC family page lists the switch and multiplexer line, the ADI part second source page covers what a genuine second source looks like for a switch with a specific on resistance, and the defense grade components page sets out the screening route for programmes that cannot accept a commercial date code.
Request Quote — In Stock, 100% New & Original, Full Warranty