ADG1408YRUZ-REEL7
Product Specifications
ADG1408YRUZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADG1408YRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADG1408YRUZ-REEL7: eight to one at 4.7 ohms, and the 190 mA that separates a signal switch from a load switch
What the part is
The ADG1408YRUZ-REEL7 is an eight channel analog multiplexer from Analog Devices in a 16-lead TSSOP. Three address lines select one of eight inputs onto a common output, and an enable pin turns all channels off. It is specified at plus and minus 15 V, plus 12 V and plus and minus 5 V on the vendor's high voltage CMOS process, and it needs no separate logic supply because the control inputs accept 3 V levels.
On resistance is 4.7 ohms maximum at 25 Celsius, flatness is 0.5 ohms, and continuous current is up to 190 mA. There is also an enhanced product version, the ADG1408-EP, specified from minus 55 to plus 125 Celsius with a controlled baseline for defence and aerospace programmes, and that version carries a different order code and a different price.
Why 4.7 ohms still works, and where it does not
Four point seven ohms into 10 kilo-ohms is 470 ppm, which is 31 codes at 16 bits and irrelevant at 12 bits. Into 1 kilo-ohm it is 0.47 percent, which is a gain error that has to be calibrated. Into 50 ohms it is nearly 10 percent, which is why this part belongs in data acquisition and audio routing rather than in a radio frequency path, where a different family with a much lower on resistance and a matched impedance is the right choice.
At 190 mA the switch drops 0.89 V and dissipates 170 mW. That is less than the 4 to 1 member of the family handles, and both figures are current ratings rather than continuous thermal promises, so the junction rise in the actual enclosure still has to be computed.
| Configuration | Eight to one, single ended |
|---|---|
| On resistance | 4.7 ohms maximum at 25 Celsius |
| Flatness | 0.5 ohms, about 10 percent of the on resistance |
| Continuous current | Up to 190 mA |
| Dissipation at 190 mA | 170 mW through 4.7 ohms |
| Supply | Specified at plus and minus 15 V, plus 12 V and plus and minus 5 V |
| Logic | 3 V compatible, no separate logic supply |
| Switching | Break before make |
| Signal range | Rail to rail, conducts in both directions |
| Package | 16-lead TSSOP, also 4 mm by 4 mm LFCSP |
| Temperature | Minus 40 to plus 125 Celsius, minus 55 to plus 125 on the EP version |
Eight channels, one common node and the crosstalk that follows
All eight channels share one output, so the off channels load that node with their own capacitance. With 4.7 ohms of on resistance and a few picofarads of switch capacitance the time constant is in the tens of picoseconds, which is not the limit. The limit is the source impedance of the selected channel and the capacitance of the common node plus the cable, which together set a settling time of microseconds rather than nanoseconds.
The EP version is worth noting for a different reason: it is the same silicon specified and screened over a 180 degree range with one assembly and test site and a controlled baseline. A defence or aerospace programme that starts with the commercial part and later needs the EP version should plan for a different order code, a different price and a longer lead time, not for a simple substitution.
Where it is used
- Eight channel data acquisition front ends and temperature scanners.
- Avionics and defence systems using the enhanced product version.
- Audio and video routing where 4.7 ohms is low enough for a line level signal.
- Medical equipment that needs a high voltage switch with a defined off state.
Buying this order code
The YRUZ-REEL7 suffix is the 16-lead TSSOP on a 7-inch reel. Buyers ask whether the four channel member of the family can be used where only four inputs are needed, which saves cost and board area, and whether the EP version is required for a programme with a military temperature range. Both questions have straightforward answers, and both change the order code rather than the board.
Comparable parts are on the pin to pin cross reference, the checks for a substitute in a measurement path are on drop in verification, and the catalogue index is on the analog and mixed signal IC page.
Request Quote — In Stock, 100% New & Original, Full Warranty