ADF41513BCPZ
Product Specifications
ADF41513BCPZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADF41513BCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADF41513: 26.5 GHz Without a Doubler, and Where the Step Size Really Comes From
The ADF41513 is an integer N and fractional N phase locked loop synthesizer that accepts a radio frequency input from 1 GHz to 26.5 GHz, with a normalized phase noise floor of -235 dBc/Hz in integer mode and -231 dBc/Hz in fractional mode. Its phase frequency detector runs to 250 MHz in integer mode and 125 MHz in fractional mode, and it offers a 25 bit fixed modulus or a 49 bit variable modulus. Reaching 26.5 GHz directly removes the doubler or divider that would otherwise sit between the loop and the radio, and that removal is worth several dB of phase noise and a filter.
Step size is arithmetic, not marketing
With a 250 MHz phase detector and the 25 bit fixed modulus, the smallest step is 250 MHz divided by 33,554,432, which is about 7.45 Hz. That is the floor for integer mode with the fastest detector, and it is not sub hertz. Sub hertz resolution comes from the 49 bit variable modulus, where the modulus is large enough that the step size stops being the limit and the reference and the loop noise become the limit instead. Any statement about resolution has to name the mode and the detector frequency, because at a 30 MHz detector the same 25 bit modulus gives steps of 0.9 Hz.
The numbers that matter for the loop
| Parameter | Value | What it decides |
|---|---|---|
| Radio frequency range | 1 GHz to 26.5 GHz | No doubler or prescaler needed in front of the loop |
| Normalized phase noise | -235 dBc/Hz integer, -231 dBc/Hz fractional | Sets the in band noise of the closed loop |
| Phase detector frequency | 250 MHz integer, 125 MHz fractional | Step size and in band noise both follow this |
| Modulus | 25 bit fixed, 49 bit variable | 7.45 Hz against sub hertz, at the same detector |
| Supply | 3.3 V analogue and charge pump, 1.8 V logic capable | One rail for the loop, one for the interface |
| Temperature range | -40 C to +105 C | Wider than the commercial parts around it |
Doubling the detector frequency is worth 3 dB, and costs a spur
In band phase noise improves by 3 dB every time the phase detector frequency doubles, which is why 250 MHz operation is attractive. The price is that the reference spur moves further out and grows, because the charge pump pulses get shorter and the loop filter has less attenuation at the higher offset. A loop that is quiet at 30 MHz can fail a spurious requirement at 250 MHz with the same filter, so the filter has to be recalculated rather than reused.
Phase resync and lock detect are not decoration
The part includes phase resync and a digital lock detect. Phase resync brings the output phase back to a known value after a frequency change, which matters for any system that combines two synthesized sources, such as a radar with a coherent transmit and receive path. Digital lock detect gives a flag that can be read over the three wire interface, and in a production test that flag is worth more than a spectrum analyser sweep, because it catches a loop that is locked to the wrong harmonic.
Matching a synthesizer to an existing board
The three parameters that decide whether a synthesizer can be dropped into an existing loop are the radio frequency input range, the charge pump supply and the interface, in that order; the modulus only matters after those three are satisfied. The RF component sourcing page lists the synthesizer family, the pin to pin cross reference page compares the register maps and the interface, and allocation is tracked on the component lead time solutions page.