Contact Us

ADA4084-2ARZ-R7

Brand: Analog Devices
Analog Devices ADA4084-2ARZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADA4084-2ARZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADA4084-2ARZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADA4084-2ARZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADA4084-2ARZ-R7: 30 V, 3.9 nV, 0.625 mA per amplifier, and two bandwidth numbers that disagree by 60 percent

The ADA4084-2ARZ-R7 is a dual rail to rail input and output operational amplifier that runs from a single 3 V to 30 V supply, or plus and minus 1.5 V to plus and minus 15 V. The code reads ADA4084-2 for the dual, AR for the 8-lead SOIC body, Z for the RoHS finish and R7 for the reel. It is one of the few parts that combines a 30 V supply with a 3.9 nanovolt noise density and 625 microamps per amplifier, a combination that a 5 V only amplifier cannot offer and that a high voltage precision amplifier usually cannot match on current.

The vendor page gives two bandwidth figures that look contradictory at first read: a gain bandwidth product of 15.9 MHz at a gain of 100, and a unity gain crossover of 9.9 MHz. They are not the same measurement. The gain bandwidth product is taken at high closed loop gain where the loop is dominated by the feedback factor, and the crossover frequency is where open loop gain passes unity. The ratio between the two, 1.61, is the amount by which the closed loop bandwidth shrinks beyond what the simple gain bandwidth product predicts once the loop is loaded.

What the vendor page states

ParameterValue
Supply3 V to 30 V single, plus and minus 1.5 V to plus and minus 15 V
Supply current0.625 mA typical per amplifier at plus and minus 15 V
Gain bandwidth product15.9 MHz at a gain of 100 typical
Unity gain crossover9.9 MHz typical
Closed loop bandwidth13.9 MHz at minus 3 dB, plus and minus 15 V
Offset voltage100 uV maximum, SOIC
Noise3.9 nV per root Hz typical at 1 kHz
Slew rate4.6 V per microsecond typical
Long term drift3 uV typical over 10,000 hours
Temperature hysteresis4 uV typical
Input and outputrail to rail on both, unity gain stable

What the two bandwidth numbers cost in a real stage

At a closed loop gain of 100 the part has roughly 159 kHz of bandwidth, which is what the gain bandwidth product predicts. At unity gain it is 13.9 MHz, which is close to the crossover figure rather than to the gain bandwidth product. An engineer who plans a 100 kHz filter at a gain of 10 from the 15.9 MHz figure will find the stage behaves as expected, and one who plans a 1 MHz stage at a gain of 50 will find it does not: 15.9 MHz divided by 50 is 318 kHz, which is the ceiling, and the phase margin at that point has to be checked against the load capacitance.

Noise against offset, and which one the application sees

3.9 nanovolts per root hertz over a 10 kHz bandwidth integrates to 0.39 microvolts RMS, and over 100 kHz to 1.23 microvolts. Against a 100 microvolt maximum offset the noise is small, so a DC coupled instrumentation stage is limited by offset and drift rather than by noise. The drift figures are the ones that decide long term stability: 3 microvolts over 10,000 hours is about 2.6 microvolts in a year, and 4 microvolts of temperature hysteresis means a board that cycles between two temperatures can return to a different offset than it left with. Neither number can be trimmed out at test, which is why they are worth reading before a part is chosen for a transducer front end.

Power and dissipation

Both amplifiers at plus and minus 15 V draw 37.5 mW, and at the full 30 V single supply the same figure holds. That is low enough that an 8-lead SOIC carries it without a thermal pad, which matters where a quad or a dual is repeated across eight channels of a data acquisition board.

Slew rate against the full supply swing

At 4.6 V per microsecond, crossing the full 30 V rail to rail takes 6.5 microseconds. A stage that has to deliver a 30 V step at 100 kHz cannot do it, and the part is not intended to: the 30 V capability is for headroom on a sensor signal that swings a few volts inside a wide common mode range. Confusing the supply range with the output swing requirement is the most common way this family gets specified into a stage it cannot drive.

What to confirm before ordering

The package letter, because the offset figure quoted here is the SOIC one and the MSOP and LFCSP bodies carry their own limits. The load capacitance, because rail to rail output stages are sensitive to it. And the supply, because the current figures are quoted at plus and minus 15 V and rise at 30 V single supply only in proportion to the voltage, not to the quiescent current.

The amplifier line is indexed under Analog and mixed-signal ICs, equivalents from other vendors are collected in the amplifier cross reference, and where a specific grade is short, the BOM shortage recovery page covers pulling a partial quantity from stock.

Request Quote — In Stock, 100% New & Original, Full Warranty