ADA4075-2ACPZ-R7
Product Specifications
ADA4075-2ACPZ-R7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADA4075-2ACPZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADA4075-2ACPZ-R7: 2.8 nanovolt noise at 1.8 millamp per amplifier
The ADA4075-2 is a dual low noise amplifier built on the vendor's iPolar process, with 2.8 nanovolt per root hertz input voltage noise density at 1 kHz, 0.0002 percent typical distortion, 1 millivolt maximum offset voltage, 6.5 MHz bandwidth and a 12 V per microsecond slew rate. The ADA4075-2ACPZ-R7 order code reads ACP for the 2 mm by 2 mm LFCSP and Z for RoHS, with R7 for the reel. Each amplifier draws 1.8 millamp typical, which is the figure that separates this device from the higher current low noise parts in the same catalogue, and the part is specified from minus 40 C to plus 125 C in both the SOIC and the LFCSP package.
What the vendor page states
| Parameter | Value |
|---|---|
| Channels | dual |
| Input voltage noise | 2.8 nanovolt per root hertz at 1 kHz typical |
| Distortion | 0.0002 percent typical |
| Supply current | 1.8 millamp per amplifier typical |
| Offset voltage | 1 millivolt maximum |
| Bandwidth | 6.5 MHz typical |
| Slew rate | 12 V per microsecond |
| Stability | unity gain stable |
| Temperature | minus 40 C to plus 125 C, extended industrial |
| Packages | 8-lead SOIC and 2 mm by 2 mm LFCSP |
The noise figure that sells the part, in microvolts
Two point eight nanovolt per root hertz over a 20 kHz audio bandwidth integrates to 396 nanovolt rms, which is the number that matters in a microphone preamplifier or a low level instrumentation front end. The distortion figure of 0.0002 percent is 114 dB below the fundamental, so in a line level audio path the amplifier contributes less distortion than the converter behind it. The pair of numbers is the reason the device appears in professional audio and in precision instrumentation rather than in general purpose signal conditioning: both are well beyond what a 10 nanovolt part can offer, and the supply current to reach them is under 2 millamp per channel.
Power and heat in a 2 mm package
Both amplifiers together draw 3.6 millamp, which at plus or minus 15 V is 108 mW in a package that occupies 4 square millimetres. In the LFCSP version the exposed pad is the only meaningful heat path, so the copper area under the package, not the package itself, decides the junction temperature. At a 60 C ambient and a thermal resistance in the usual 100 C per watt range for a small package on a modest pad, 108 mW adds about 11 C, which is comfortable. Running the same device at plus or minus 5 V drops the dissipation to 36 mW and makes the thermal question disappear, which is often the right trade for a battery instrument.
Bandwidth, slew rate and where the two cross
Six point five megahertz at a gain of 10 leaves 650 kHz of closed loop bandwidth. The slew rate of 12 V per microsecond limits a 10 V peak sine to 382 kHz, so a large signal path reaches its slew limit before its bandwidth limit, which is the normal situation for a bipolar input stage. For an audio application the useful region is far below both figures, and the part is chosen for noise and distortion rather than for speed. For a customer who needs the same noise performance in a different footprint the amplifier cross reference lists the alternatives by package and current, the component lead time solutions page explains how a long schedule on the LFCSP version is covered, and the analog and mixed signal category page holds the rest of the low noise range.
Request Quote — In Stock, 100% New & Original, Full Warranty