AD9744ARUZ
Product Specifications
AD9744ARUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD9744ARUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD9744ARUZ: 14 bit 210 MSPS digital to analog converter in TSSOP
The AD9744ARUZ is the 14-bit member of the pin compatible TxDAC family in a 28-lead TSSOP body. It updates at 210 MSPS, settles to 0.1 percent in 11 ns, delivers 83 dBc of spurious free dynamic range at a 5 MHz output and dissipates 135 mW from a 3.3 V supply, which is what a transmit path in a base station or an instrument needs.
Published values
| Parameter | Value |
|---|---|
| Resolution | 14 bits, pin compatible with the 8, 10 and 12 bit family members |
| Update rate | 210 MSPS maximum |
| Integral linearity | -5 to +5 LSB maximum, +-0.8 LSB typical |
| Differential linearity | -3 to +3 LSB maximum, +-0.5 LSB typical |
| Settling time to 0.1 percent | 11 ns |
| Spurious free dynamic range | 83 dBc at 5 MHz output, 80 dBc at 10 MHz, 73 dBc at 20 MHz |
| Signal to noise ratio | 77 dB at 5 MHz output and 125 MSPS |
| Full scale output current | 2 mA to 20 mA, set by an external resistor |
| Output compliance range | -1.0 V to +1.25 V |
| Internal reference | 1.20 V, 1.14 V to 1.26 V, 50 ppm/C drift |
| Supply | 2.7 V to 3.6 V on AVDD, DVDD and CLKVDD |
| Supply current | 33 mA analog, 8 mA digital, 5 mA clock |
| Power dissipation | 135 mW at 25 MSPS, 15 mW in power down |
| Package | 28-lead TSSOP |
Update rate against settling
210 MSPS is a 4.76 ns clock period and the output takes 11 ns to settle to 0.1 percent, which is longer than two clock periods. That is normal for a current steering converter: the settled value is not what the next stage samples, because the output is a current into a transformer or a resistor and the reconstruction filter does the averaging. The 11 ns is the number to use when the converter drives a sampling stage directly, not when it drives a 50 ohm load and a filter.
The spurious free dynamic range falls with output frequency, from 83 dBc at 5 MHz to 73 dBc at 20 MHz. At 14 bits one code is about 86 dB below full scale, so a 73 dBc spur at 20 MHz is four times one code. A system that needs the full 14 bits at a high intermediate frequency has to look at the spur, not at the resolution.
Current output and the compliance window
The output is a current of 2 mA to 20 mA set by an external resistor, and the compliance range of -1.0 V to +1.25 V is where that current is accurate. Outside that window the output transistors leave their linear region and the linearity degrades, so the load network has to hold the output pins inside the window at all times, including during a full scale step. A transformer coupled output with a centre tap at ground is the usual way.
The 20 mA full scale into a 50 ohm load is 1 V, which is close to the top of the compliance window, so many circuits use a 25 ohm or a transformer with a lower turns ratio instead. The output resistance of 100 k and the capacitance of 5 pF are what set the settling and the even order distortion.
Supply, clock and board reality
The three supplies are all 3.3 V nominal with a 2.7 V to 3.6 V range, and the currents are 33 mA, 8 mA and 5 mA, which is 135 mW in total and 15 mW in power down. The clock input is a single ended CMOS input at 210 MSPS, so a 210 MHz square wave with fast edges is the dominant noise source on the board; it needs its own supply filter and a ground return that does not share the analog return.
The 28-lead TSSOP has a thermal resistance high enough that 135 mW raises the junction by about 20 C, which is fine, but the digital and clock currents are the ones that couple into the analog output, so the decoupling belongs at the pins with a short return. A board that treats the converter as one more digital part will show spurs that no data sheet figure predicts.
For a board that has to keep running while a reel runs out, the ADC and DAC cross reference is where the family alternatives sit, component lead time solutions is the check list before a substitute goes in, and one stop BOM sourcing is how a gap is covered without a new line item.
Two questions buyers ask
Can the 14 bit part be replaced by the 12 bit one in the same footprint? Yes. The TxDAC family is pin compatible across 8, 10, 12 and 14 bits, so a build can trade resolution for cost or availability by changing the part number, and the external network stays the same.
What sets the output current? An external resistor at the full scale adjust pin, from 2 mA to 20 mA. Lower current saves power and reduces the voltage across the load, so the compliance window is easier to stay inside.