Contact Us

AD9214BRS-65

Brand: Analog Devices
Analog Devices AD9214BRS-65 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD9214BRS-65 — Analog & Mixed-Signal ICs | Superb Automation

AD9214BRS-65

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD9214BRS-65 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD9214: 10 Bits at 65 MSPS From 190 mW, and 57 dB of Signal to Noise at 39 MHz

The AD9214 is a 10 bit sampling analogue to digital converter with an on chip track and hold, available at 65, 80 and 105 MSPS. It runs from a single 3.3 V supply, accepts a 1 V peak to peak or a 2 V peak to peak input, has an analogue bandwidth of 300 MHz, and dissipates 190 mW at 65 MSPS and 285 mW at 105 MSPS, dropping to 30 mW in power down. The signal to noise ratio of 57 dB at a 39 MHz input is the number that decides which applications it can serve, because it corresponds to about 9.2 effective bits, not 10.

Ten bits of resolution, nine bits of performance

Effective number of bits is the signal to noise ratio minus 1.76, divided by 6.02. With 57 dB that is 9.18 bits at 39 MHz. The missing bit is not a fault; it is the normal cost of sampling a fast input, where the clock jitter of the sample and hold turns into noise. At lower input frequencies the same part delivers closer to 58 dB, and the tenth bit becomes real. A system that needs ten effective bits at 39 MHz should be looking at a part with a higher signal to noise ratio, and there are many, at two to three times the power.

The numbers that travel with the part

ParameterValueNote
Resolution10 bitsParallel CMOS output, two's complement or offset binary
Sample rate65, 80 or 105 MSPSThree order codes, same die
Signal to noise57 dB at 39 MHz inputAbout 9.2 effective bits at that frequency
Power190 mW at 65 MSPS, 285 mW at 105 MSPS30 mW in power down
Analogue bandwidth300 MHzAllows undersampling above the first Nyquist zone
Input range1 V peak to peak or 2 V peak to peakSelected by a pin, not by an external network
Supply3.3 V analogue, separate output supplyThe output rail can be 2.5 V for the logic that follows

The input range option is worth 6 dB, and costs twice the swing

Doubling the full scale input from 1 V to 2 V peak to peak raises the signal by 6 dB while the converter's own noise stays the same, so the signal to noise ratio improves by 6 dB. The cost is that the amplifier in front has to deliver twice the swing into the same load, which usually means more current and more distortion. On a 3.3 V supply a 2 V peak to peak differential swing is close to the limit of what a low distortion amplifier can deliver, so the 2 V option is used when the driver can afford it and the 1 V option when it cannot.

A separate output supply is a small feature with a large effect

The digital outputs are powered from their own pin, so the converter can run its analogue side from 3.3 V and its outputs at 2.5 V to match an field programmable gate array input bank. Without that separation, the output swing would be set by the analogue rail and a level shifter or a series resistor would be needed on ten lines. It also keeps the switching current of the outputs out of the analogue supply, which is worth a decibel or two of noise at high sample rates.

Where this converter still fits

At 190 mW for 65 MSPS, this part suits battery powered instruments, handheld scopes, ultrasound front ends and cable return path receivers, all of which value power and cost over the last bit of resolution. In a new wideband radio it has been replaced by differential pipelined converters with serial outputs, but in instruments with a long production life it is still the part on the board, and that is where the sourcing question comes from. The ADC DAC cross reference page lists the converter family, the obsolete part cross reference hub tracks the long life parts, and receipt checks are described in the incoming inspection plan.