Contact Us

AD8666ARZ-REEL7

Brand: Analog Devices
Analog Devices AD8666ARZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8666ARZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD8666ARZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8666ARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8666ARZ-REEL7: a dual rail to rail output amplifier rated to 16 volts with 1 picoamp of bias

What this order code is

AD8666ARZ-REEL7 is a dual operational amplifier in the AD866x family, single supply parts with rail to rail output that run from 5 V to 16 V, or plus and minus 2.5 V to plus and minus 8 V. The offset is 2.5 millivolts maximum, the input bias current is 1 picoamp maximum, the voltage noise is 8 nanovolts per root hertz at 10 kHz and the bandwidth is 4 MHz. ARZ is the 8-lead SOIC body and REEL7 is the reel.

The family is aimed at cost sensitive work that would once have needed a JFET input part: the bias current is low enough for a photodiode or a high impedance sensor, the supply range reaches 16 V so it can sit on the same rail as a converter front end, and the part is qualified for automotive applications in the relevant order codes. The rail to rail claim on this family is on the output; the input common mode range is not claimed to reach both rails.

Parameters as published

ItemValue
Supply range, single5 V to 16 V
Supply range, dualplus or minus 2.5 V to plus or minus 8 V
Offset voltage2.5 millivolts maximum
Input bias current1 picoamp maximum
Voltage noise8 nanovolts per root hertz at 10 kHz
Gain bandwidth4 MHz
Output swingrail to rail
Stabilityunity gain stable
Temperature rangeminus 40 C to plus 125 C
Package8-lead SOIC

Numbers that decide the application

The offset of 2.5 millivolts is 32.8 counts of a 16 bit converter on a 5 V range, so this is not a dc precision part and the family itself says so, pointing at the AD8661, AD8662 and AD8664 for a lower offset. What the part buys instead is bias current: 1 picoamp across a 10 megohm source is 10 microvolts, which is four hundred times below the offset, so the source impedance can be high without the bias term appearing in the error budget at all.

Noise of 8 nanovolts over a 100 kHz band is 2.53 microvolts rms, 0.033 of a 16 bit count, so the amplifier noise is not the limit in front of a converter. At a gain of 10 the 4 MHz product leaves 400 kHz of closed loop bandwidth, and at unity gain the whole 4 MHz is available, which is enough for a charge amplifier on a photodiode and not enough for video.

The supply range is the part of the specification that decides where the device can sit. A 16 V ceiling means the amplifier can run from the same 12 V or 15 V rail as a bipolar analog section, and the 5 V floor means it cannot be used on a 3.3 V rail at all. That single number rules the part in or out before any of the ac figures matter.

Selection and cross reference notes

The comparison inside the family is the one a buyer will actually make: the AD8661, AD8662 and AD8664 offer a lower offset, and the AD866x parts here offer the wider supply and the low bias at a lower price. A board that needs 16 V and 1 picoamp has few alternatives, and a board that needs 100 microvolts of offset is looking at the wrong family.

Rail to rail output is not rail to rail input, and mixing the two claims is the classic substitution error. A follower built from this part with the input taken to the positive rail will not behave as the output swing suggests, and the data sheet is careful about which side of the amplifier the rail to rail claim applies to. The automotive qualified codes are also separate order strings, so the qualification does not carry across the family.

Where it fits

Sensor amplification, reference buffers, medical equipment, physiological measurements, signal filters and conditioning, consumer audio, photodiode amplification, converter driving and level shifting are the applications named on the product page. The photodiode and physiological measurement cases are where the 1 picoamp bias earns its place, and the reference buffer case is where the 16 V rail and the rail to rail output earn theirs. Buyers who need the family view can start at the analog and mixed signal category page, and teams working on patient connected equipment usually go through the medical device components page.

Buying notes

ARZ is the 8-lead SOIC body and REEL7 is the reel; the dual and quad members and the automotive codes carry different strings. Because the family name covers parts with different offset specifications, a quotation that names only AD866x is not enough to confirm what will arrive, and the exact code belongs on the purchase order.

Sourcing notes and next step

The questions that come back are the rail voltage, the source impedance at the input and whether the automotive qualification is required. We quote the AD8666 codes against a bill of materials and confirm the body and qualification against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and the cross reference where the exact code is short.

Request Quote — In Stock, 100% New & Original, Full Warranty