AD8666ARZ
Product Specifications
AD8666ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8666ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8666ARZ: the 16 volt dual CMOS amplifier in an 8-lead SOIC
The AD8666ARZ is the SOIC body version of the dual 16 V 4 MHz CMOS amplifier. Same die, same 2.5 mV offset, same 1 pA bias current, same 4 MHz, in a package with 1.27 mm lead pitch and a lower thermal resistance than the MSOP.
Published values
| Parameter | Value |
|---|---|
| Offset voltage | 0.7 mV typical, 2.5 mV maximum at 5 V |
| Offset voltage drift | 3 uV/C typical, 10 uV/C maximum |
| Input bias current | 0.2 pA typical, 1 pA maximum |
| Supply current per amplifier | 1.1 mA typical, 1.4 mA maximum at 5 V |
| Gain bandwidth | 4 MHz |
| Slew rate | 3.5 V/us |
| Voltage noise density | 10 nV/root Hz at 1 kHz |
| CMRR | 84 dB minimum at 5 V |
| Input voltage range | -0.1 V to +3.0 V at 5 V |
| Output swing at 1 mA | 4.88 V minimum high at 5 V |
| Phase margin | 70 degrees |
| Supply range | 5 V to 16 V single supply |
| Thermal resistance | theta JA 158 C/W for the 8-lead SOIC_N |
Why a SOIC for a 4 MHz part
4 MHz and 1.4 mA do not need a large package, so the SOIC is a board decision. A 1.27 mm pitch takes a hand iron, a probe and a socket, which matters on a prototype, a test fixture or a low volume instrument. It also gives more distance between the two input pins, which is worth something on a 1 pA bias current device where board leakage is the main threat to the input.
The thermal resistance of 158 C/W means the 7 mW a dual dissipates at 5 V raises the junction by about 1 C, so the package is not a constraint at any supply in the range. At 16 V the dual draws 50 mW and the rise is about 8 C, still well inside the 125 C limit.
What the part is good for
A 16 V CMOS amplifier with a 1 pA input is the natural front end for a high impedance sensor on an industrial rail: a photodiode, a pH electrode through a buffer, a piezoelectric transducer, or a resistive divider that has to present almost no load. The 4 MHz bandwidth covers audio and control loop work, and the 3.5 V/us slew keeps a 10 V step inside 3 us.
It is not a precision part. 2.5 mV of offset with 10 uV/C of drift over 165 C is 1.65 mV of movement, so any direct current measurement at 16 bits is dominated by the amplifier. A 12-bit channel, a filter or a buffer is the right use, and the AD8667 is the precision version when the offset has to be small.
Substitution and availability
The AD8665 single, the AD8666 dual and the AD8668 quad are one family with the same electrical behaviour, so a board that needs a single channel does not have to pay for two. The AD8667 is pin compatible with the AD8666 in the 8-lead SOIC but is a different amplifier: 520 kHz, 250 uA, 175 uV. Dropping it into an AD8666 footprint is electrically safe and changes the bandwidth by a factor of eight, which is the kind of substitution that has to be checked, not assumed.
Availability for this family is normally good because it is a volume industrial part, but the 16 V versions have had long lead times in past cycles. A build that runs on this amplifier should keep the AD8668 quad footprint option open so that one package can cover a shortage of the dual.
The pages that answer this most often are the pin to pin cross reference for the family alternatives, component lead time solutions for the acceptance test, and BOM shortage recovery for the case where a replacement has to be fitted before the next build.
Two questions buyers ask
Is the AD8667 a drop-in upgrade for the AD8666? Same pinout in the 8-lead SOIC and a very different part: 520 kHz against 4 MHz, 250 uA against 1.4 mA, 175 uV against 2.5 mV. The socket fits, the loop behaviour does not.
Does the SOIC version differ electrically from the MSOP? No. Same die and same limits; only the thermal resistance and the footprint change.