AD8608ARUZ
Product Specifications
AD8608ARUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8608ARUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8608ARUZ: four 10 MHz low noise amplifiers in a 14-lead TSSOP
The AD8608ARUZ is the four channel member of the AD8605/AD8606/AD8608 family in a 14-lead TSSOP: 10 MHz of gain bandwidth, 8 nV/root Hz of noise and 80 mA of output current per channel for 1 mA per amplifier. It gives a four channel acquisition front end the noise and speed of a single channel part without four packages and four decoupling points.
Published values
| Parameter | Value |
|---|---|
| Offset voltage, 3.5 V supply | 20 uV typical, 75 uV maximum |
| Offset voltage, 5 V rail-to-rail input | 80 uV typical, 300 uV maximum, 750 uV maximum over temperature |
| Offset voltage drift | 1.5 uV/C typical, 6 uV/C maximum |
| Input bias current | 0.2 pA typical, 1 pA maximum, 300 pA maximum at 125 C |
| Supply current, four channels | 4 mA typical, 4.8 mA maximum |
| Gain bandwidth | 10 MHz |
| Slew rate | 5 V/us |
| Voltage noise density | 8 nV/root Hz typical, 12 nV/root Hz maximum |
| PSRR | 77 dB minimum, 92 dB typical |
| Output current per channel | plus or minus 80 mA |
| Output at 10 mA load | 4.7 V minimum high, 210 mV maximum low on a 5 V rail |
| Supply range | 2.7 V to 5.5 V single supply |
Four channels, one supply pin, four times the coupling
A quad at 10 MHz shares its rails with three other amplifiers that are each capable of 5 V/us and 80 mA. A load step on one channel pulls a current pulse through the shared supply pin and the bond wire, and the other three channels see it as a shift in their own supply. The published PSRR of 77 dB turns a 10 mV supply disturbance into 1.4 uV at the input, which is small, but the 80 mA case is not a 10 mV disturbance. Decouple each supply pin and keep high current loads away from the sensitive channels.
The offset is a per channel number
Seventy-five microvolts typical in the 3.5 V condition and 300 uV maximum across the full input range are per amplifier, and the four channels are independent. A four channel ratiometric measurement can rely on the channels drifting together only to the extent that the 6 uV/C maximum allows, which is 600 uV over 100 C and larger than the room temperature offset.
Driving four converter inputs
Eight nanovolts and 10 MHz are more than a 16-bit converter needs at 100 kSPS, and the surplus is what lets the same package drive a multiplexed input where each channel has to settle after the switch. Settling to 0.01 percent in under 1 us on a 2 V step gives a 4 channel multiplexer about 250 kSPS aggregate, which is a sensible ceiling for a 16-bit system.
Where it belongs and where it does not
Four channel photodiode arrays, multi-axis vibration sensors, four wire bridge arrays and multi-channel audio are the natural sockets. A four channel battery instrument is not: 4 mA of quiescent current is the whole budget of a coin cell product, and the 40 uA family in the same package width is the correct answer there.
Two pages worth reading before a purchase order goes out are the amplifier cross reference and the ADC and DAC cross reference; the first lists what else fits the socket, the second is the test sequence for a drop in, and one stop BOM sourcing covers the case where the shortage is already on the line.
Two questions buyers ask
Can the four outputs be combined? They can be summed through resistors, but the noise improves only as the square root of the count and the offset errors add. A single lower noise amplifier is usually the better answer.
Is the AD8608 the same die as the AD8605? It is the same amplifier circuit in a four channel package. The specifications differ slightly: 75 uV maximum offset at 3.5 V against 65 uV, and 6 uV/C maximum drift against 4.5 uV/C.