Contact Us

AD8606ARZ

Brand: Analog Devices
Analog Devices AD8606ARZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8606ARZ — Analog & Mixed-Signal ICs | Superb Automation

AD8606ARZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8606ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8606ARZ: dual 10 MHz low noise amplifier in SOIC-8

The AD8606ARZ is the two channel member of the AD8605/AD8606/AD8608 family in an 8-lead SOIC_N: 10 MHz of gain bandwidth, 8 nV/root Hz of voltage noise, 5 V/us of slew rate and a 1 pA input bias current for 1 mA per amplifier. Two channels in one body make it the usual choice for an I and Q pair, a differential driver or a stereo signal path that has to stay low noise.

Published values

ParameterValue
Offset voltage, 3.5 V supply20 uV typical, 65 uV maximum at 3 V common mode
Offset voltage, 5 V rail-to-rail input80 uV typical, 300 uV maximum, 750 uV maximum over temperature
Offset voltage drift1 uV/C typical, 4.5 uV/C maximum
Input bias current0.2 pA typical, 1 pA maximum, 250 pA maximum at 125 C
Supply current, both channels2 mA typical, 2.4 mA maximum
Gain bandwidth10 MHz
Slew rate5 V/us
Voltage noise density8 nV/root Hz typical, 12 nV/root Hz maximum at 1 kHz
CMRR85 dB minimum, 100 dB typical
Open loop gain300 V/mV minimum, 1000 V/mV typical
Output currentplus or minus 80 mA
Supply range2.7 V to 5.5 V single supply

Two channels, two milliamps, one error budget

Three hundred microvolts of worst case offset at room temperature, the figure this family lists across the full rail-to-rail input on a 5 V rail, is a quarter of a 12-bit code at 5 V. That is why this pair is comfortable in front of a 14 or 16 bit converter: the offset can be removed with a single calibration constant and the drift of 4.5 uV/C maximum is what remains, about 450 uV over a 100 C excursion if the worst case number is used.

What the two channels do not share

The two amplifiers share a die and a supply pin, and nothing else. Their offsets are independent samples, so a differential stage built from both channels carries the sum of two offsets rather than the difference of none. For a true differential front end the instrumentation amplifier topology, where one difference stage removes both input offsets, is the better answer than two independent buffers.

Driving the converter input

Eighty milliamps of output current is more than most 16-bit converters ask for, and the 300 V/mV minimum of open loop gain means the stage holds its gain to 0.03 percent at a closed loop gain of 10. The remaining error term is the settling: 5 V/us with a 16 pF load and under 1 us to 0.01 percent on a 2 V step, which is fast enough to be transparent to a converter running at 500 kSPS.

Assembly and decoupling

The SOIC-8 body has a 120 C/W thermal resistance and dissipates only 12 mW for the pair, so temperature rise is negligible. Put 100 nF at the supply pin, keep the feedback node short, and remember that a 1 pA bias current is only meaningful if the board is clean: flux residue at these impedances is three orders of magnitude larger.

When an order code in this family cannot be found, the amplifier cross reference lists what else does the same job, the ADC and DAC cross reference covers what to check before a part is dropped into an existing board, and one stop BOM sourcing is the route we take on a live shortage.

Two questions buyers ask

Are the two channels matched? No matching is published. Each channel has its own offset and drift limit, so a difference between channels can be twice a single channel's error.

What is the noise of the pair compared with the single? The same, since the figure is per amplifier. Two channels do not halve the noise, they merely put two independent 8 nV sources in one package.