Contact Us

AD8603AUJZ-REEL7

Brand: Analog Devices
Analog Devices AD8603AUJZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8603AUJZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD8603AUJZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8603AUJZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8603AUJZ-REEL7: 50 uV of offset, 1 pA of bias, 50 uA of supply, in a five lead package

The AD8603AUJZ-REEL7 is an Analog Devices single channel micropower operational amplifier with rail to rail input and output, in a 5-lead TSOT package. The maximum offset voltage is 50 uV, the maximum input bias current is 1 pA, the supply range is 1.8 V to 5 V single or plus and minus 0.9 V to plus and minus 2.5 V, the voltage noise density is 22 nV per root hertz, and the supply current is 50 uA maximum. It is unity gain stable, has no phase reversal, and uses a trimming technique that achieves the precision without laser trimming. The family covers single, dual and quad in the AD8603, AD8607 and AD8609, and the part is aimed at battery instrumentation, multipole filters, sensor interfaces and buffering converters or ASICs. It is listed on the analog and mixed-signal IC line card.

Fifty microvolts is 0.66 of a 16-bit code, and the noise in a 10 kHz band is 2.2 uV

Against the 76.3 uV code of a 16-bit converter on a 5 V span, a 50 uV maximum offset is 0.66 of a code, which is a serious claim for a part that draws 50 uA. The noise tells the other half of the story: 22 nV per root hertz integrated over 10 kHz is 2.2 uV rms, which is 44 times the offset and 0.029 of a code at 16 bits over that band. So the amplifier is offset limited in a narrow band and noise limited in a wide one, and the noise only reaches the 50 uV offset above 5.2 MHz of bandwidth, so the offset is the term to trim and the noise is the term to filter. For a dc measurement with a 10 Hz band the offset dominates and a single point calibration removes it; for an audio band measurement the noise dominates and no calibration helps.

ParameterVendor figureDerived figure
Offset voltage50 uV maximum0.66 of a 16-bit code on 5 V
Input bias current1 pA maximum10 uV into 10 Megohm, 1 mV into 1 Gigohm
Noise density22 nV per root hertz2.2 uV rms over 10 kHz, 0.22 uV over 100 Hz
Supply current50 uA maximum250 uW at 5 V, 90 uW at 1.8 V
Supply range1.8 V to 5 V singlea single lithium cell without a boost converter
Input and output swingrail to rail on botha full scale buffer for a rail to rail converter
Stabilityunity gain stableusable as a follower without compensation
Phase behaviourno phase reversalan overdriven input does not invert the output
Package5-lead TSOTone amplifier in the footprint of a transistor
Familysingle, dual and quadAD8607 and AD8609 share the specifications

One picoamp of bias is what makes a high impedance sensor possible

A photodiode, a pH electrode and a piezo sensor all present a source impedance in the megohms or higher, and the bias current of the amplifier flows through that impedance. At 1 pA the error is 10 uV into 10 Megohm, which is a fifth of the offset, and 1 mV into 1 Gigohm, which is twenty times the offset. That is the boundary: the part is a precision choice up to about 100 Megohm and its offset stops mattering above about 1 Gigohm. The 22 nV noise density is not exceptional, so the rule is a narrow band with a high source impedance, which is exactly the shape of a sensor interface.

Fifty microamps buys a place in a battery product

At 5 V the part draws 250 uW, and at 1.8 V it draws 90 uW. A 1,000 mAh battery at 3.7 V holds 3.7 Wh, so this amplifier would take 15 years to empty it on its own, which is the point: the amplifier disappears from the power budget and the converter and the radio decide the life. That is what allows four or eight of these in a multi-pole filter without a power argument, and the family's dual and quad members keep the density without changing the per amplifier current.

Selection notes

  • The rail to rail input means a follower can sit at either rail, and the output can drive a converter input that spans the same rails.
  • No phase reversal matters in a comparator-like use where the input can be driven beyond the rails.
  • At 22 nV the part is not a low noise choice: a sensor with a 1 k source would be better served by a bipolar input part with more current.
  • The 5-lead TSOT has no shutdown pin, so a system that needs to power the amplifier down has to switch its supply.

Questions buyers ask

Is 50 uV enough for a 16-bit measurement? Yes for a dc channel with a 10 Hz band: the offset is 0.66 of a code and the noise is 0.22 uV. In a 10 kHz band the noise grows to 2.2 uV and the band, not the offset, sets the resolution.

Can it drive a switched capacitor converter input directly? It can drive a converter that samples at a low rate, and the charge injection of a fast converter will need a series resistor and a capacitor at the input.

Amplifier alternatives are compared in amplifier cross reference, and the cost of a lower power grade is covered under how to reduce component cost.

Request Quote — In Stock, 100% New & Original, Full Warranty