Contact Us

AD8331ARQZ

Brand: Analog Devices
Analog Devices AD8331ARQZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8331ARQZ — Analog & Mixed-Signal ICs | Superb Automation

AD8331ARQZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8331ARQZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8331ARQZ: The Ultrasound VGA Where the Preamplifier Noise Sets the Whole Receive Chain

The AD8331ARQZ is a single channel ultralow noise variable gain amplifier built for ultrasound and sonar time gain control, and its architecture is the point: a low noise preamplifier with a programmable input resistance, followed by a 48 dB range voltage controlled amplifier and a post amplifier, all on a single 5 V supply and drawing 125 mW. The number that governs everything downstream is the preamplifier voltage noise of 0.74 nV per root hertz. Integrated over a 20 MHz receive bandwidth that is 3.3 uV rms, and over 5 MHz it is 1.65 uV rms, so the noise floor of the whole chain is set before the variable gain stage does anything at all. A transducer that delivers a smaller signal than that is not recoverable by more gain.

Gain range, gain modes and where the 48 dB comes from

The variable gain stage covers minus 4.5 dB to plus 43.5 dB in the low gain mode and 7.5 dB to 55.5 dB in the high gain mode, which is a 48 dB span in either case, and the choice of mode moves the window rather than widening it. Time gain control works by sweeping that window as the echo returns, because the signal from a deep reflector is both later and weaker, and the sweep has to be monotonic and free of steps or the image shows banding. The output clamp is a separate feature that matters in the same context: a strong near field echo can saturate the chain and ring for microseconds afterwards, and a selectable clamp level bounds the recovery rather than letting the amplifier decide it.

Programmable input resistance and the transducer match

The preamplifier presents an active input impedance that is set by a resistor, so the transducer can be matched without a transformer or a passive network at the input. That saves components and, more importantly, it keeps the match inside the same package that sets the noise floor, so the noise figure of the interface is not degraded by a lossy matching element. The current noise of 2.5 pA per root hertz is the other half of the match: into a high impedance source it dominates the voltage noise, and the crossover point is where the two contributions are equal, which for this part is in the low kilo ohm region. A transducer with a much higher source impedance needs the match network to bring it down or the current noise will eat the advantage of the 0.74 nV preamplifier.

ParameterValue on this order codeWhat it decides
Channels1, singleAD8332 dual and AD8334 quad are separate parts
Preamplifier noise0.74 nV per root hertz, 2.5 pA per root hertz3.3 uV rms over 20 MHz of receive band
Bandwidth120 MHzThe widest of the three family members
Gain rangeMinus 4.5 to plus 43.5 dB low mode7.5 to 55.5 dB in the high gain mode
Output noise48 nV per root hertz typicalA low gain figure, the preamplifier dominates at high gain
Input matchProgrammable input resistanceTransducer matched without a transformer
Output clampSelectable clamp levelBounds recovery after a saturating echo
Supply and powerSingle 5 V, 125 mW per channelSixteen channels is 2 W of receive electronics
Converter fitOptimised for 10-bit and 12-bit convertersThe post amplifier drives the converter directly

The 48 nV figure and the gain it belongs to

The output referred noise of 48 nV per root hertz is quoted at the low end of the gain range, and it is a mistake to carry it to the top. At 43.5 dB the gain is 150 times, so the preamplifier's 0.74 nV per root hertz appears at the output as 111 nV per root hertz before the post amplifier, which is already above the 48 nV figure. The practical reading is that at low gain the output noise is set by the variable gain stage and at high gain it is set by the preamplifier, and a time gain control sweep passes through both regions. That is why the noise specification has to be read as a curve against gain and not as a single number, and why a receive chain budget that uses the 48 nV figure across the whole sweep will overstate the dynamic range at depth.

Where the part belongs

Ultrasound receive channels, sonar, automatic gain control loops and high speed dual converter drivers are the intended sockets, and the part fits them because the preamplifier, the attenuator and the post amplifier are all inside one package with one supply. A discrete version of the same chain is larger, harder to keep quiet and impossible to characterise as a unit. Where the channel count is the issue, the dual and quad members of the family are the same architecture with more channels, and the ADI part second source page sets out what a substitute has to match beyond the gain range. The pin to pin cross reference covers the package question for an existing board, and the one stop BOM sourcing page covers buying the receive chain parts together.