AD8221ARMZ
Product Specifications
AD8221ARMZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8221ARMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8221ARMZ: Precision Instrumentation Amplifier in an 8-Lead MSOP
The AD8221ARMZ is the MSOP version of the AD8221 precision instrumentation amplifier: one resistor sets the gain from 1 to 1000, the supply range is 2.3 V to 18 V, and the DC specifications are the reason the part is still specified into new instruments. Input voltage noise is 8 nV per root hertz maximum at 1 kHz with 0.25 microvolts peak to peak from 0.1 Hz to 10 Hz, common-mode rejection is 80 dB minimum to 10 kHz at unity gain and 90 dB minimum in the B grade, bandwidth is 825 kHz at unity gain, and slew rate is 2 V per microsecond. The B grade holds 25 microvolts maximum input offset, 0.3 microvolts per degree maximum drift and 0.4 nA maximum bias current.
Published values
| Parameter | Value |
|---|---|
| Gain | 1 to 1000, one resistor, G = 1 + 49.4 kohm divided by RG |
| Supply range | 2.3 V to 18 V |
| Input noise | 8 nV per root hertz maximum at 1 kHz |
| Low frequency noise | 0.25 microvolts peak to peak, 0.1 Hz to 10 Hz |
| Common-mode rejection | 80 dB minimum to 10 kHz at gain of 1, 90 dB minimum B grade |
| Bandwidth | 825 kHz at gain of 1 |
| Slew rate | 2 V per microsecond |
| Input offset, B grade | 25 microvolts maximum |
| Offset drift, B grade | 0.3 microvolts per degree Celsius maximum |
| Input bias current, B grade | 0.4 nA maximum |
| Specified temperature | minus 40 to plus 85 degrees Celsius, operational to 125 |
| Package | 8-lead MSOP |
The MSOP is a thermal decision as much as a space decision
In the 8-lead MSOP the package has no thermal pad, and the die dissipates about 1 mA times the supply, so 18 V of supply is 18 mW. The junction rise in still air is on the order of 200 degrees per watt, which is 3.6 degrees: comfortable, but only if the part is not surrounded by regulators. The reason it matters is drift, not destruction. The 0.3 microvolt per degree specification assumes the die and the package are at the same temperature as the board, and a local hot spot will produce a thermal gradient across the input pair that no amount of trimming removes. Keep the gain resistor away from the part and away from any switching node, and give the input traces a symmetrical run.
One resistor, and the tolerance that comes with it
Gain is 1 plus 49.4 kohm divided by RG, so the gain error is dominated by the external resistor rather than by the amplifier: a 0.1 percent resistor gives a 0.1 percent gain error, and a 1 percent part gives 1 percent. The amplifier's own gain error is specified separately and is much smaller. Use a 0.1 percent, 25 parts per million resistor if the gain has to hold over temperature, and note that the resistor's temperature coefficient adds directly to the gain drift. For a gain of 100, RG is about 499 ohm, so a 499 ohm 0.1 percent part is a standard purchase item; for a gain of 2, RG is 49.4 kohm and the same tolerance applies.
Common-mode rejection falls with frequency, and that is normal
The 80 dB figure is specified to 10 kHz at unity gain, and the curve falls at roughly 20 dB per decade above that because the input capacitance and the source impedance form a pole. At 1 MHz the rejection is far lower, so an instrumentation amplifier is not a substitute for a differential filter in an environment with radio frequency interference. A pair of 1 kohm resistors and a differential capacitor at the input, plus a common-mode capacitor to the shield, moves the corner up and keeps the rejection usable. This is the same reason the input traces should be short and matched: any asymmetry converts common mode into differential signal before the amplifier can reject it.
Availability and second sourcing
The MSOP and the SOIC versions share a die, so a shortage of one package can often be covered by the other with a footprint change rather than a circuit change. Beyond that, the parameters that must match are the noise, the offset drift and the gain equation, in that order. The amplifier cross reference page groups the instrumentation amplifiers by grade, the pin to pin cross reference page lists the 8-lead footprints, and the lead time page shows which package and grade are shippable.