Contact Us

AD8031ARZ-REEL7

Brand: Analog Devices
Analog Devices AD8031ARZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8031ARZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD8031ARZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8031ARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8031ARZ-REEL7: 80 MHz on 800 microamps, and the 4 mW it costs on a 5 V rail

The AD8031 is a single voltage feedback amplifier specified for 2.7 V, 5 V and plus or minus 5 V supplies, with rail to rail input and output, 80 MHz of small signal bandwidth at unity gain, a 30 V per microsecond slew rate and 125 ns settling to 0.1 percent. The supply current is 800 microamps per amplifier, which is 4 mW on a 5 V rail and 2.16 mW on 2.7 V. The order code reads AR for the 8-lead SOIC, Z for RoHS and REEL7 for the 750 unit reel. It is the single version of the AD8032 dual and it is specified over minus 40 C to plus 85 C.

What the vendor page states

ParameterValue
Supply2.7 V to 12 V single, up to plus or minus 6 V dual
Supply current800 microamps per amplifier
Bandwidth80 MHz at a gain of plus one, small signal
Slew rate30 V per microsecond
Settling125 ns to 0.1 percent
Input rangerail to rail, extends 200 mV beyond each rail, no phase reversal to 500 mV beyond
Outputswings within 20 mV of either rail, 15 mA output current
Offset1.5 mV maximum in the high grade
Distortionminus 62 dBc at 1 MHz into 2 V p-p, minus 86 dBc at 100 kHz into 4.6 V p-p
Package8-lead SOIC, also 8-lead PDIP and 5-lead SOT-23

Eighty megahertz is a small signal figure, the slew rate sets 4.77 MHz at 2 V p-p

A full power sine at 2 V p-p needs the output to move 1 V in each direction, and at 30 V per microsecond the highest frequency that can be delivered without slew limiting is 4.77 MHz. Raise the amplitude to 4.6 V p-p, which is the level the distortion figure is quoted at, and the limit falls to 2.08 MHz. The 80 MHz number is reached at small signal levels where the output moves a few tens of millivolts, so an amplifier chosen on bandwidth alone will run out of current long before it runs out of gain. This gap is the first thing to check when the part is used to drive a converter input at anything above a volt peak to peak.

125 ns of settling puts a ceiling near 8 megasamples

Settling to 0.1 percent in 125 ns means the output is usable 125 ns after a step, which in a multiplexed acquisition path limits the channel rate to about 8 Msps before acquisition time, switch settling and converter sampling are counted. In practice the number is lower, but it tells the buyer whether the part belongs in front of a 1 Msps converter or a 10 Msps one. The distortion figures convert to 0.079 percent at 1 MHz and 0.005 percent at 100 kHz, which for a 12-bit converter, where one LSB is 0.024 percent, means the amplifier is not the limiting element at 100 kHz and is roughly three LSB at 1 MHz.

Four milliwatts, and where that matters

At 5 V the part draws 4 mW, which is 0.05 mW for every megahertz of small signal bandwidth. On a 2.7 V rail it draws 2.16 mW and on plus or minus 5 V it draws 8 mW, so the same die costs twice as much on a split supply. In a battery instrument with four channels of buffering, the difference between this part and a 1 mA amplifier is 0.8 mW per channel and 3.2 mW for the set, which is small against a converter but not against a sleeping system's budget. The output stage can deliver 15 mA, which is 1.5 V into a 100 ohm load, so it drives a cable or a resistor network without a second buffer.

Rail to rail with two conditions attached

The input common mode range extends 200 mV beyond each rail and the part does not phase reverse until the input is 500 mV beyond a supply, and the output reaches within 20 mV of either rail. Those three numbers are what make a single supply buffer work at zero volts input, which is where a ground referenced sensor sits. The amplifier cross reference lists the parts that share this pinout and supply range, the obsolete part hub tracks the life cycle of the SOIC and SOT-23 versions, and the analog and mixed signal category page holds the rest of the amplifier family.

Request Quote — In Stock, 100% New & Original, Full Warranty