AD7982BRMZRL7
Product Specifications
AD7982BRMZRL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7982BRMZRL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7982BRMZRL7: 18 bits at 1 MSPS, 16 effective bits and 4 mW
The AD7982BRMZRL7 is an Analog Devices 18-bit successive approximation converter running at 1 MSPS from a single 2.5 V supply, in a 10-lead MSOP or a 3 mm by 3 mm LFCSP. The input is true differential with a span of plus and minus the reference, and the reference can be anywhere from 2.5 V to 5 V independently of the supply. The architecture is zero latency, with no missing codes and a typical integral nonlinearity of plus or minus 1 LSB, a dynamic range of 99 dB at a 5 V reference, signal to noise of 98 dB and total harmonic distortion of minus 119 dB at a 1 kHz input. Power is 4 mW at 1 MSPS from the analogue supply alone and 7 mW in total, falling to 70 uW at 10 kSPS. The serial port is SPI, QSPI, MICROWIRE and DSP compatible, supports daisy chaining and provides a busy indicator, and the logic supply accepts 1.8 V to 5 V. It is specified from -40 C to +85 C. It is on the analog and mixed-signal IC line card.
Ninety eight decibels is 16 effective bits, and the part has 18
A full scale sine has an rms value of 0.707 times its peak, so signal to noise ratio in decibels converts to effective bits as the ratio minus 1.76 divided by 6.02, which for 98 dB gives 15.99 bits. The 18-bit code at a plus and minus 5 V span is 38.15 uV, and 98 dB of signal to noise means the noise and distortion floor sits about two bits above the 18-bit code, which is why the usable resolution is 16 bits. The 99 dB dynamic range is 16.45 bits. So the honest description is an 18-bit converter with 16 usable bits, and a customer who needs 17 effective bits needs a different part rather than a quieter reference.
| Parameter | Vendor figure | Derived figure |
|---|---|---|
| Resolution and rate | 18 bits, 1 MSPS | one conversion every 1 us |
| Input span | plus and minus the reference, 2.5 V to 5 V | 38.15 uV per code at a 5 V reference |
| Signal to noise | 98 dB at 1 kHz | 15.99 effective bits |
| Dynamic range | 99 dB | 16.45 bits |
| Distortion | minus 119 dB at 1 kHz | a spurious floor far below the noise floor |
| Integral nonlinearity | plus or minus 2 LSB maximum | 76.3 uV at a 5 V reference |
| Power at 1 MSPS | 4 mW analogue, 7 mW total | 4 uW per kSPS of throughput |
| Power at 10 kSPS | 70 uW | 7 uW per kSPS, the quiescent floor |
| Latency | zero latency architecture | the sample read is the sample requested |
Zero latency is a control loop requirement, not a speed figure
A pipelined converter delivers a result several cycles after the sample, so a control loop that closes around it has to account for that delay in its stability margin. A successive approximation converter converts the sample it was given and returns it in the same frame, which is what zero latency means. In a 1 MSPS loop the difference is between a loop delay of 1 us and one of several microseconds, and at a 10 kHz crossover the phase margin depends on it.
Selection notes
- The reference is independent of the supply, so a 5 V reference with a 2.5 V analogue supply gives the full 10 V differential span at half the supply voltage.
- The 70 uW at 10 kSPS is mostly quiescent, so power scales with throughput but not linearly: the part is not intended for a 1 kSPS duty cycle.
- Daisy chaining several converters on one three-wire bus is what allows eight channels to share a digital isolator.
- The switched capacitor input needs a driver that settles within the acquisition window, and the vendor names two amplifiers for the job.
Questions buyers ask
Can it reach 18 effective bits with a quieter reference? No. The 98 dB figure is the converter's own noise and distortion, so 16 effective bits is the ceiling regardless of the reference.
Does the 5 V reference require a 5 V supply? No, the analogue supply is 2.5 V and the reference is separate, which is why the part is used in low voltage systems with a high level input.
Precision converters are compared on ADC DAC cross reference, and the parts that replace a discontinued code are checked on pin to pin cross reference.
Request Quote — In Stock, 100% New & Original, Full Warranty