Contact Us

AD7798BRUZ

Brand: Analog Devices
Analog Devices AD7798BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7798BRUZ — Analog & Mixed-Signal ICs | Superb Automation

AD7798BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7798BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7798BRUZ: Three Differential Inputs, 40 nV of Noise and 380 uA of Supply Current

The AD7798 is the 16-bit member of a three channel sigma delta family whose 24-bit member is the AD7799. It has three differential inputs, an instrumentation amplifier on chip, a programmable gain stage, a digital filter with simultaneous 50 Hz and 60 Hz rejection, an internal oscillator, a reference detect function and a low side power switch, all in a 16-lead TSSOP. Root mean square noise is 40 nV at a 4.17 Hz update rate and 85 nV at 16.7 Hz, the update rate is programmable from 4.17 Hz to 470 Hz, supply current is 380 uA typical and power down is 1 uA maximum.

40 nV of noise against a 298 nV code

At a gain of 128 with a 2.5 V reference the full scale span is about 19.5 mV and one 16-bit code is 298 nV. The specified noise of 40 nV at 4.17 Hz is therefore about a seventh of a code, which means the converter's own resolution, not its analog front end, is the limit at that rate. That is an unusual position for a 16-bit part and it is the reason the family has a 24-bit member with the same front end: the analog path is quiet enough that more bits are worth having. On this page the conclusion is that a 16-bit reading at 4.17 Hz is stable to the last code, and that averaging further gains nothing.

Three inputs and the low side power switch

Three differential channels are enough for a ratiometric bridge, a temperature sensor and a supply monitor on one board, and the low side power switch lets the part remove power from a bridge between readings so the bridge does not dissipate continuously. That switch is the reason a battery instrument can run a 350 ohm bridge at full excitation for a few milliseconds per second instead of continuously, which changes the average current by two orders of magnitude. The switch is not a general purpose output: it has a defined on resistance that adds to the bridge's lower leg and has to be included in the ratiometric calculation.

ParameterValueWhat it decides
ChannelsThree differentialBridge, temperature and supply on one part
Resolution16 bits298 nV per code at a gain of 128
Noise at 4.17 Hz40 nV rmsOne seventh of a code, converter limited
Noise at 16.7 Hz85 nV rmsFaster readings cost a factor of two in noise
Update rate4.17 Hz to 470 HzThe noise against response trade
Mains rejection50 Hz and 60 Hz simultaneouslyWorks on either line frequency without a setting
Supply current380 uA typical1.14 mW at 3 V for three channels
Power down1 uA maximumDuty cycled operation
Low side switchIntegratedBridge power removed between readings
Reference detectIntegratedFlags a missing reference instead of reading full scale
OscillatorInternalNo external clock or crystal
InterfaceThree wire serial, ready on data outNo separate interrupt line needed
Package16-lead TSSOPThree channels in a small body

Simultaneous 50 Hz and 60 Hz rejection

A filter that notches only 50 Hz is useless in a 60 Hz country, and one that notches only 60 Hz is useless in Europe. A sinc filter running at a rate that places notches at both frequencies at once removes the need for a mains frequency setting, which in a product shipped worldwide is worth more than the small loss of settling time. The rejection is finite: the notch depth is specified, and a large interfering signal at 50 Hz that falls between the notches still gets through. The specification to check is the rejection at the notch against the amplitude of the interference the board expects.

The instrumentation amplifier and the gain range

The on chip amplifier is a true instrumentation stage with a differential input and a gain setting, so a small bridge signal is amplified before the modulator rather than after it, which is what preserves the noise performance. The gain also sets the input range, so the full scale is the reference divided by the gain, and a board that needs 10 mV full scale uses a gain of 128 with a 1.25 V reference. The amplifier's own offset and drift are specified separately from the modulator's, and at the highest gain the offset drift is the term that decides whether the reading is stable over temperature.

Choosing between the 16-bit and 24-bit members

The two parts share a package and a function, and the difference is the output word length. On a 4.17 Hz reading the 16-bit member is already limited by its own resolution and the 24-bit member delivers more bits of real information from the same front end. The choice is therefore a decision about what the reading is used for: a control loop that averages anyway gains nothing from 24 bits, and a weighing scale that reports to 1 part in 100000 needs them.

Sourcing a three channel sigma delta front end

The order code fixes the package and the temperature grade, and the 16-bit part shares a footprint with the 24-bit part, which makes a platform strategy possible. Parts that combine a gain stage with a sigma delta converter are listed in ADC DAC cross reference, the instrument and sensor side of a bill of materials is covered in OEM procurement, and the supply risk on a long life instrument is addressed in component obsolescence management.